We supply heavy-duty Dana Brevini planetary gearboxes, Spicer Off-Highway drive axles, Powershift transmissions, GWB heavy industrial cardan shafts, and mobile sectional hydraulic systems for construction, mining, and heavy industrial machinery. Engineered system selection based on operational load cycles, complete unit supply, full customs clearance, and global logistics execution.
Key Dana Industrial Machinery Portfolios
Select a drive system category or submit your operating duty requirements. Our engineers provide precision ratings for gearboxes, heavy axles, and universal driveshafts.
Dana Brevini Planetary Gearboxes S, SL, ED, ET Series
Dana Brevini S, SL, ED, and ET series industrial planetary gearboxes are engineered for demanding processing machinery requiring high torque density and space-saving dimensions.
The modular architecture integrates 1 to 4 planetary reduction stages in in-line coaxial or right-angle bevel configurations. Units feature heavy-duty spherical and tapered roller bearings, direct mounting adapters for IEC/NEMA electric motors or hydraulic motors.
These drives deliver dependable torque for bulk conveyors, industrial mixers, plastics extruders, steel rolling mills, and mining drums.
Selection inputs: nominal output torque (up to 1,100,000 Nm), ratio range (3.5 to 3000:1), mounting orientation (foot, flange), and input shaft style.
Spicer Off-Highway Drive & Steer Heavy Planetary Axles 111–357 Series
Dana Spicer Off-Highway 111, 112, 113, 211, 212, 262, and 357 series heavy-duty axles are engineered for off-highway vehicles, telehandlers, wheel loaders, motor graders, and underground dump trucks.
Axles integrate a rigid ductile iron housing, spiral bevel differential with standard or Limited Slip locks, hub-mounted planetary reduction gears, and enclosed multi-disc wet brakes with internal oil cooling.
Selection inputs: dynamic axle rating (up to 30 t), track width, overall gear ratio, brake configuration, and housing B/M tag.
Spicer Powershift Heavy Transmissions T12000, T20000, TE Series
Dana Spicer Powershift heavy transmissions including T12000, T16000, T20000, and advanced TE series (TE13, TE17, TE27, TE32, TE50) enable full power-shift capability under heavy continuous duty.
Systems integrate matched Dana Spicer C270, C320, or C5000 hydrodynamic torque converters, wet multi-disc clutch packs, proportional ECM modulation solenoids, and electronic APC management controllers to eliminate shift shock and protect the powertrain.
Selection inputs: engine input power (50 to 600 kW), forward/reverse gear steps, mounting arrangement (engine or midship), and converter model.
GWB Heavy Industrial Driveshafts & Spicer Life Series Cardan Shafts
Dana GWB heavy-duty industrial universal joint shafts (series 492, 498, 587, and 688) are specifically engineered to convey extreme torque up to 1,500,000 Nm in metal rolling mills, continuous casters, rotary drilling tables, and marine marine propulsion systems.
Complementary Spicer Life Series (SPL) shafts serve high-speed commercial and crane drives with permanently lubed trunnion bearings, Glidecote friction-free splines, and standard DIN/SAE serrated flanges.
Selection inputs: peak operational torque, maximum angular deflection, closed installed length (Lmin), and companion flange standard.
Brevini Axial Piston Pumps, Hydraulic Motors & Power Units
Dana Brevini Fluid Power systems incorporate variable and fixed displacement axial piston pumps and motors (BPV, BPR, SH series) for open and closed hydraulic loops, alongside high-torque low-speed orbital motors (BG, BR, BS, AR series).
Components sustain operational pressures up to 420 bar and support pressure compensation, Load Sensing regulation, and electro-proportional displacement controls. Complete hydraulic power packs are engineered on unitary skids with integrated reservoirs and filtration.
Selection inputs: displacement (cc/rev), circuit type (open/closed loop), peak working pressure, control regulator type, and drive shaft options.
Brevini Proportional Sectional Directional Control Valves HPV & DCV Series
Dana Brevini modular sectional proportional control valves (HPV 41, HPV 77, and DCV series) deliver micro-positioning accuracy for mobile cranes, concrete pumps, drill rigs, and forestry harvesters.
Each working slice integrates an autonomous Load Sensing pressure compensator, preventing speed deviations when operating multiple functions simultaneously under uneven loads. Control options encompass CAN-bus electro-hydraulic actuators, PWM analog signals, and manual override levers.
Selection inputs: total flow rate (up to 400 l/min), number of working spool slices, solenoid coil voltage (12/24 V), and bus control protocol.
Brevini Compact Planetary Hydraulic Winches PWD, BWF, EGO Series
Dana Brevini hoisting and pulling winches (PWD, BWF, and EGO series) integrate a multi-stage planetary reduction drive and fail-safe braking package directly inside the structural cable drum.
The enclosed architecture shields gearing from marine splash, abrasive sand, and moisture while delivering line pulls from 5 to 300 kN. Standard features include spring-applied hydraulically released multi-disc brakes, grooved drum sleeves, cable spooling guides, and load-limiting sensor systems.
Selection inputs: first-layer line pull rating (kN), drum cable storage capacity, wire rope diameter, line speed, and brake rating.
Brevini Slewing Drives & Turntable Gearboxes RPR, SLS Series
Dana Brevini RPR and SLS series slewing drive gearboxes are dedicated to operating large slew rings and turntable bearings across construction tower cranes, hydraulic excavators, deck pedestal cranes, wind turbines, and industrial index tables.
Units feature integrally forged output pinions with spur or helical tooth profiles, high-load tapered roller bearings to absorb cantilevered gear reaction forces, and integrated dynamic or holding disc brake packs.
Selection inputs: peak slewing output torque (up to 100 kNm), output pinion gear module and tooth count, ratio, and brake setup.
Selection Criteria for Dana Industrial Systems
To configure replacement gearboxes, axles, or transmissions, specify nominal output torque, reduction ratio, input rotational speed, duty cycle shock factor, mounting orientation, and ambient environmental conditions.
Genuine Replacement Components & Assemblies
We supply authentic planetary gear stages, crown and pinion sets, differential carriers, wet friction clutch discs, hydraulic pump rotating groups, and universal joint cross kits matching original Dana factory part numbers and B/M bills of material.
Scope & Supply Clarifications
This website does not publish localized dealership certificates, retail price books, or real-time shelf stock lists. Project delivery terms, equipment costs, and custom engineering parameters are individually finalized within commercial quotations based on actual operational criteria.
We source authentic Dana Industrial machinery and sub-assemblies via verified global supply chains across Europe, the US, and Asia, offering fully compatible industrial drive alternatives tailored to your facility's machinery requirements.
Torque Rating and Service Factor Calculation for Brevini Planetary Gearboxes
The engineering selection of Dana Brevini S, SL, ED, and ET series planetary gearboxes is based on calculating the required output torque T2 adjusted by the operational service factor fs.
The service factor accounts for duty cycle variations, daily operating hours, and starting shock frequencies in compliance with ISO 6336 and DIN 3990 international standards. 2.
The computed equivalent torque is cross-referenced against the catalog nominal torque rating T2N and peak torque capacity T2MAX to prevent gear flank pitting and planet pin shear failure.
Kinematic Principles and Design of Spicer Off-Highway Axle Assemblies
Dana Spicer Off-Highway 111, 112, 212, 262, and 357 series heavy drive axles feature a two-stage reduction architecture to maintain compact central pumpkin dimensions while maximizing ground clearance under harsh off-highway terrain.
The primary reduction stage resides in the central ductile iron housing via spiral bevel ring and pinion gears and a robust bevel differential equipped with standard mechanical or Limited Slip clutches. The secondary reduction occurs at the wheel hubs via heavy-duty planetary gear clusters.
This design relieves axle shafts of severe torsional stresses, applying torque directly to the wheel rim. Fully enclosed wet multi-disc brakes run in continuous oil baths, shielding friction discs from abrasive slurry.
Spicer Powershift Heavy Transmissions: Hydraulic Control and Shifting
Dana Spicer Powershift heavy transmissions including T12000, T20000, and TE series deliver seamless on-the-fly gear shifting under continuous engine load without interrupting tractive effort.
Engine power couples through a matched Dana Spicer C270, C320, or C5000 hydrodynamic torque converter, providing infinite automatic torque multiplication based on ground resistance. Gear ratios engage via hydraulically compressed wet multi-plate clutch packs.
Advanced electronic APC controllers continuously modulate proportional ECM solenoid valves, shaping clutch pressure rise curves with millisecond precision to eliminate shock loads and extend driveline service life.
Engineering Selection of GWB Heavy Industrial Universal Joint Shafts
Dana GWB series 492, 498, 587, and 688 heavy cardan shafts convey massive rotational torque up to 1,500,000 Nm across primary steel rolling stands, continuous casting roller tables, and oilfield rotary drilling tables.
Driveline engineering evaluates yield torque thresholds, operational deflection angles up to 15–20 degrees, and critical whirling speeds to prevent bending resonance.
Forged alloy steel cross journals fitted with high-capacity needle roller bearings and multi-lip polyurethane contact seals maintain structural integrity under continuous exposure to rolling mill scale, water spray, and heavy shock reversals.
Submit Technical Requirements for Powertrain Analysis
Attach machine duty cycles, technical data sheets, or nameplate photographs. Our engineering team reviews gear ratios, dimensional drawings, and supply schedules within a comprehensive commercial proposal.
Related industrial drivetrain and motion control manufacturers
