Industrial Drivelines, Transmissions & Axle Systems from Global Supply Chains
ZF Friedrichshafen Driveline, Transmission & Axle Systems
Specify ZF equipment and components for your application: Duoplan 2K machine tool drives, industrial and marine gearboxes, off-highway transmissions and rail assemblies.
ZF Friedrichshafen Industrial Product Portfolio
Key commercial vehicle transmissions, heavy machinery powershift gearboxes, axle systems, marine gearboxes, and industrial drives:
Duoplan 2K machine tool spindle gearboxes
Duoplan two-speed gearboxes are used in machine tool main-spindle drives and test benches. For 2K 121 and other versions, identify the installed gearbox from its nameplate and documentation before selecting an assembly or part.
- Documented sizes include 2K120/121, 2K250/300 and 2K450/600
- The documentation also covers 2K800/1000 and 2K2100
- Provide full designation, output arrangement and installation position
Redulus Heavy Planetary Drives & ZF Wind Power Gearboxes
Redulus industrial gearboxes and travel, swing or winch drives serve different duties. A replacement needs the installed designation; a new project needs load data and the mounting arrangement.
- Redulus4F and GMH/GME are industrial planetary gearbox families
- GFA/GPT cover travel, GFB swing and GPT-W winch applications
- GFC distributes the drive to hydraulic pumps
ZF Marine Propulsion Systems & Reverse Reduction Gearboxes
ZF Marine transmission selection depends on the engine and propulsion arrangement. For a replacement component, provide the gearbox nameplate, ratio and the item reference from the relevant drawing.
- The marine portfolio covers propulsion components and control systems
- Define engine, operating duty and the required transmission arrangement
- List the gearbox, connections and agreed accessories in the project scope
Ergopower & WG Hydrodynamic Powershift Transmissions
ERGOPOWER powershift transmissions are used in construction machinery. Match the WG assembly or service component to the installed nameplate, machine model and duty cycle before defining the scope of supply.
- ERGOPOWER M/L is developed for wheel loader applications
- For replacement, provide transmission type, parts list and serial number
- For a project, define engine, installation, cooling and power take-off
TERRAMATIC Agricultural Continuously Variable Transmissions (CVT)
TERRAMATIC is a continuously variable transmission family for agricultural tractors. For a complete assembly or its components, identify the TMT or TMG version and the tractor configuration.
- The family uses CVT technology for agricultural tractor applications
- The manufacturer documentation illustrates TMT32, TMG28 and TMT09
- Selection requires the parts list, connections and driveline configuration
ZF Rail Traction Gearboxes, Axle Drives & CDC Dampers
ZF rail drivelines and dampers perform different functions. Identify the rolling stock, assembly number and component duty before requesting a complete unit or replacement part.
- EcoMet is a modular gearbox family for metro and commuter applications
- Treat the transmission, coupling and damper as separate order items
- For replacement, provide marking, drawing reference and installation dimensions
TraXon Automated & EcoLife Automatic Heavy-Duty Transmissions
TraXon and EcoLife serve different commercial vehicle duties. Select a complete transmission or replacement assembly by its full designation, parts list and vehicle configuration rather than the ZF name alone.
- TraXon is an automated transmission family for commercial vehicles
- EcoLife 2 is a six-speed automatic transmission for bus applications
- Specify engine, transmission version, controls and power take-off requirements
Low-Floor Portal Axles & Independent Front Suspensions AV 133 / RL 75
ZF axle and suspension assemblies require vehicle-specific identification. For AV, RL or Multitrac enquiries, send the assembly nameplate, installation drawing and details of the component to be replaced.
- Identify the axle, suspension or wheel-end assembly as a separate item
- Check gear ratio, mounting dimensions and connection arrangement
- Include the braking system and steering configuration in the enquiry
Servocom & Servotwin Electro-Hydraulic Power Steering Systems
Steering gears, hydraulic pumps and electronic controls are separate order items. For Servocom or Servotwin, identify the installed unit and vehicle steering arrangement before requesting an assembly or service part.
- Use the complete number on the installed steering gear
- For mechanical units, compare mounts, shaft and hydraulic ports
- For electronic assemblies, include connectors and control-unit identification
SACHS Heavy-Duty Clutch Assemblies & ConAct Actuators
SACHS clutch and ConAct actuation enquiries start with the installed transmission. State whether the requirement is a disc, pressure assembly, release actuator or a defined replacement package.
- Identify the clutch marking and the transmission parts list
- Compare hub connection, mounting arrangement and installation dimensions
- List the required package contents and related components separately
WABCO Commercial Braking & Pneumatic Control Systems
WABCO pneumatic and braking control components are identified by their full part number. Treat an electronic modulator, compressor and air treatment assembly as separate system components in the enquiry.
- Provide the complete unit number and a readable nameplate photograph
- For electronic items, identify connectors and the installed system version
- For pneumatic units, document ports, mounts and the connection arrangement
EcoSplit Manual & AS Tronic Automated Commercial Gearboxes
AS Tronic, EcoSplit and Ecomid enquiries require the complete transmission designation and version. List mechanical components and control assemblies separately so each replacement can be checked against the installed unit.
- Identify the assembly from its nameplate and parts list number
- For mechanical parts, specify shaft, gear, synchronizer or housing
- For controls, include unit number, actuator and electrical connections
ZF Intarder Secondary Hydrodynamic Transmission Retarders
Intarder assemblies and components are selected with the transmission data. State whether the requirement is a complete retarder, heat exchanger, hydraulic assembly or control component.
- Provide the complete transmission and installed retarder designation
- For a heat exchanger, record dimensions and fluid connections
- For controls, include the unit number and connection information
LEMFÖRDER Steering Links, Torque Rods & Chassis Bushings
LEMFÖRDER chassis components require a part number and application reference. For rods and joints, describe the mounting position and dimensions of the installed component before selecting a replacement.
- Identify the part number, vehicle application and installation position
- Record connection dimensions and photographs of both ends
- State quantity per item and the contents required for the replacement set
ZF Factory Overhaul Kits, Gaskets & Rebuild Packages
The contents of an overhaul package depend on the specific assembly and repair scope. List seals, bearings, friction components and other required items against a drawing or inspection parts list.
- Start with the assembly designation and its parts list number
- Provide drawing references and quantities for the replacement components
- Keep the defined kit and additional individual components as separate items
ZF EcoFluid & LifeguardFluid Synthetic Driveline Lubricants
Select a service fluid for a ZF assembly using its documentation and required approval. Provide the exact transmission or axle, the specified fluid designation and the packaging quantity needed.
- Use the designation and lubricant requirements of the specific assembly
- State the required volume and preferred container size
- An approval for one transmission family does not establish another application
CeTrax Central Electric Drives, AxTrax Axles & eTrac Systems
A ZF electric drive is specified as part of the complete powertrain. For CeTrax or eTrac enquiries, provide the machine data, electrical system information and the required scope of equipment.
- List the drive, electronics and mechanical connections as separate assemblies
- For replacement, provide the numbers on the installed components
- For a project, define load, operating cycle and cooling requirements
ZF Testman Pro Diagnostic Interfaces & Service Adapters
Start a ZF Testman enquiry with the assembly to be serviced and the diagnostic task. Identify the interface and software already in use, then list the connection cables required for the intended work.
- Define the hardware and software scope of the requested package
- List connection cables and adapters as separate order items
- Use the installed control-unit identification to specify the required version
ZF Wind Power Multi-Megawatt Turbine Gearboxes
A wind turbine gearbox enquiry requires the turbine project documentation. Provide the complete gearbox designation, serial number and the required scope of supply before selecting an assembly or component.
- Use the specific turbine and gearbox designation as the reference
- For an individual component, provide its position on the assembly drawing
- For a project, include load, interface and cooling data
Documents and sources
Equipment selection for the application
For equipment selection, identify the machine, drive arrangement and operating duty. For a replacement part, attach a readable nameplate, part number and drawing reference. Similar transmission designations can have different shafts, flanges, controls and connections.
Replacement parts and package contents
Separate the enquiry into complete equipment, replacement assemblies and service materials. State quantity and required contents for each item. A photograph helps identify the part; the installation dimensions and assembly designation provide the reference for checking its application.
Related manufacturers
Bonfiglioli gearboxes and drive equipment · Flender gearboxes and components · Voith hydrodynamic transmissions and drives
Commercial Supply Terms & Delivery
ZF and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ZF and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Selection and quotation on request, supply to order. The supplier, origin, documents and warranty are specified for each item in the quotation.
