DENSsolutions in situ systems for TEM and SEM
Technical selection of DENSsolutions systems: Wildfire, Lightning, Lightning Arctic, Climate Infinity and Stream Infinity TEM holders, FireBolt and HydroBolt for SEM, MEMS chips and Impulse software.
Wildfire TEM heating system
Wildfire is a double tilt TEM holder with a Nano-Chip that heats the sample from room temperature up to 1300 °C. Four-point probe heating gives 0.005 °C stability and less than 0.5% temperature variance between windows. Low infrared emission allows EDS analysis up to 1000 °C.
- Heating up to 1300 °C
- Stability 0.005 °C
- EDS up to 1000 °C
- Viewable area 850 µm²
Lightning heating and biasing
Lightning combines heating and electrical biasing of the sample in one TEM holder. Its Nano-Chip withstands up to 150 V (300 kV/cm) from room temperature to 900 °C, and I-V is measured with pA current sensitivity. The double tilt holder is machined from titanium.
- Bias up to 150 V
- Field up to 300 kV/cm
- Heating with bias to 900 °C
- Titanium holder
Lightning Arctic cooling, heating and biasing
Lightning Arctic cools the sample with liquid nitrogen and heats it with the chip microheater: from −160 °C to 800 °C in one experiment, with a bias range of at least ±40 V. The external dewar holds up to 800 ml of nitrogen, enough for at least 4 hours without refill.
- From −160 °C to 800 °C
- Bias at least ±40 V
- Dewar up to 800 ml
- At least 4 hours per fill
Climate Infinity gas environment
Climate Infinity is an 8-contact TEM holder for heating and biasing in gas. The Nano-Reactor handles pressures up to 2 bar and heating up to 1000 °C. The Gas Supply System mixes up to three gases and typically changes the sample environment in less than 15 s.
- 8 electrical contacts
- Pressure up to 2 bar
- Heating up to 1000 °C
- Up to three gases
Stream Infinity liquid cell
Stream Infinity is an 8-contact TEM holder for electrochemistry in liquid at set temperatures. The Nano-Cell heats the liquid up to 100 °C and carries working, reference and counter electrodes. The Liquid Supply System with pumps and a flow meter adds inert gas purging.
- 8 electrical contacts
- Heating up to 100 °C
- Three-electrode cell
- Inert gas purging
FireBolt SEM heating holder
FireBolt is an SEM and FIB holder with up to 8 electrical contacts: local heating up to 1300 °C and heating with bias up to 900 °C. It works with EBSD detectors for off-axis, near-axis and on-axis TKD. Recommended sample size: up to 100 × 100 µm², up to 10 µm high.
- Heating up to 1300 °C
- Heating with bias to 900 °C
- Up to 8 contacts
- Advised height up to 10 µm
HydroBolt SEM electrochemistry stage
HydroBolt is a bulk electrochemistry stage for SEM and benchtop use. It has an external Ag/AgCl reference and a Pt counter electrode, with an on-chip Pt or glassy carbon working electrode. It runs in static or flow mode with aqueous or organic electrolytes.
- Ag/AgCl reference electrode
- Pt counter electrode
- Static or flow mode
- Glovebox assembly
Impulse and Nexus software
Impulse controls the Wildfire, Lightning, Climate and Stream systems: heating, biasing, gas and liquid flow. Experiment profiles are built by drag and drop, and a Python API runs custom scripts. Nexus puts TEM images and Impulse signals on a shared timeline.
- Heating and bias control
- Python API
- Drag-and-drop profiles
- Shared timeline in Nexus
Choosing a DENSsolutions system
DENSsolutions was founded in 2012; the headquarters is DENSsolutions B.V. in Delft, the Netherlands. The company makes in situ electron microscopy systems: MEMS chips with heating, electrical biasing, gas and liquid environments let users follow processes in the sample directly in a TEM or SEM.
The MEMS chips are developed and produced in Delft.
For TEM: Wildfire (heating), Lightning (heating and biasing), Lightning Arctic (cooling, heating and biasing), Climate Infinity (gas) and Stream Infinity (liquid). For SEM: the FireBolt holder and the HydroBolt electrochemistry stage.
Experiments are controlled with Impulse software, and data are combined in Nexus.
Choosing a TEM holder
For heating up to 1300 °C choose Wildfire: the maker states 0.6 Å resolution at 1000 °C as routinely achievable, depending on the microscope. Wildfire systems with 6 or 8-contact holders can be upgraded to Lightning.
For gas work choose Climate Infinity: EELS spectra are recorded at pressures up to 2 bar, and the Gas Supply System takes three cylinders of up to 10 L.
The Infinity holder can be converted from gas to liquid and back; on JEOL TEMs its universal tip applies to wide pole pieces such as HRP and WGP. Vaporizer Flex is an option for Climate Infinity (relative humidity 10-90% for water and 1-99% for alcohols, stable within 2%).
Infinity Light is an option for Climate Infinity and Stream Infinity (wavelengths 350-2000 nm, up to 1500 mW/cm² at the sample).
SEM, FIB and manufacturer services
FireBolt is inserted through the SEM chamber door and does not support a loadlock; there are three versions, for Thermo Fisher Scientific chips, JEOL chips and Lightning Arctic JEOL chips.
The holder works with Tescan, Thermo Fisher Scientific, Zeiss and other SEMs and with the Phenom XL desktop SEM.
HydroBolt uses the same connections and control electronics as the Stream Infinity system, so it needs no hardware of its own. In its lab in Delft the maker runs demos, trainings and in situ experiments on request.
DENSsolutions and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of DENSsolutions and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ELDICO Scientific
- Equipment and parts for Qnami
- Equipment and parts for Quantum Design
- Equipment and parts for ADVACAM
- Equipment and parts for Montana Instruments
Documents and sources
- About DENSsolutions — founded in 2012
- DENSsolutions contact — Delft headquarters
- MEMS production news — made in Delft
- Products — TEM and SEM systems
- Services — lab in Delft
- In situ services — experiments on request
- Wildfire — TEM heating
- Wildfire Nano-Chip — specifications
- Lightning Nano-Chip — window materials
- Lightning — heating and biasing
- Lightning Arctic — cooling, heating and biasing
- Climate Infinity — gas environment
- Nano-Reactor — specifications
- Gas Supply System — specifications
- Vaporizer Flex — option
- Stream Infinity — liquid environment
- Nano-Cell — electrodes and flow
- Liquid Supply System — specifications
- Infinity Light — sample illumination
- Infinity sample holder — design
- FireBolt — SEM heating and biasing
- HydroBolt — SEM electrochemistry
- FIB Stub — lamella preparation
- Impulse — experiment control software
