Quantum Design materials characterization systems
Technical selection of Quantum Design equipment: PPMS DynaCool and VersaLab systems, the MPMS 3 SQUID magnetometer, OptiCool optical cryostats, helium compressors and crystal growth furnaces.
PPMS DynaCool system
PPMS DynaCool is a cryogen-free physical property measurement system: a two-stage pulse tube cooler cools both the superconducting magnet and the temperature control system. It covers 1.8-400 K with 9, 12 or 14 T magnets, and cool-down takes 40 minutes.
- 1.8-400 K range
- 9, 12 or 14 T magnets
- Two-stage pulse tube
- 40 min cool-down
Compact PPMS VersaLab system
PPMS VersaLab is a compact cryogen-free system for teaching laboratories, shared facilities and research groups. It operates from 50 to 400 K with fields up to 3 T and cools down in under 120 minutes. It runs almost all PPMS measurement options with no high power requirement.
- 50-400 K range
- Fields up to 3 T
- Cool-down under 120 min
- No liquid cryogens
MPMS 3 SQUID magnetometer
MPMS 3 is a SQUID magnetometer with a 7 T magnet and a 1.8-400 K range; cooling from 300 to 1.8 K typically takes 25 minutes. Measurement modes are DC, SQUID-VSM and AC susceptibility. The field ramps at up to 700 Oe/s, and the system is cryogen-free with EverCool.
- 7 T magnet
- 1.8-400 K range
- Ramp up to 700 Oe/s
- Typical cool-down 25 min
PPMS DynaCool measurement options
Options for PPMS DynaCool: the VSM (about 1 s per data point), a VSM Oven for 300-1000 K, ACMS II AC susceptibility with 0.05-15 Oe excitation at 10 Hz-10 kHz, Heat Capacity with 2 nJ/K signal resolution at 2 K, and the Thermal Transport Option.
- VSM Oven 300-1000 K
- ACMS II 10 Hz-10 kHz
- ACMS II field 0.05-15 Oe
- Heat capacity 2 nJ/K
PPMS DynaCool sub-kelvin options
PPMS DynaCool has three sub-kelvin options: the Dilution Refrigerator (4 K-50 mK, base typically reached in about 5 hours), the Helium-3 Refrigerator (350 K-0.4 K, about 2 hours) and the ADR down to 100 mK. The Dilution Refrigerator keeps its gas mixture in a closed cycle.
- Dilution down to 50 mK
- Helium-3 down to 0.4 K
- ADR down to 100 mK
- 50 mK base in about 5 h
OptiCool optical cryostats
OptiCool is a family of cryogen-free closed-cycle optical cryostats: 1.7-350 K with vibration below 10 nm peak-to-peak. Configurations: 7 Tesla with 8 ports, Vector with a 4-1-1 T magnet and 5 ports, and magnet-free Flex with a 75x200 mm volume. The bottom port is optional.
- 1.7-350 K range
- Vibration below 10 nm
- Vector: 4-1-1 T magnet
- Flex: 75x200 mm volume
HAC 900 and HLC 4900 helium compressors
Quantum Design variable-speed compressors serve Gifford-McMahon and pulse tube cold heads. The HAC 900 is a 2.5 kW air-cooled unit. The HLC 4900 is an 8 kW water-cooled unit developed with Sumitomo (SHI) Cryogenics of America; a dedicated chiller is optional.
- HAC 900: 2.5 kW class
- HAC 900: air-cooled
- HLC 4900: 8 kW class
- HLC 4900: water-cooled
Crystal growth furnaces
The Quantum Design Laser Furnace grows single crystals by the floating zone method: the 2 kW version has five 400 W beams, heats from 400 to 3000 °C depending on the material and grows crystals up to 150 mm long. The 2-mirror IR Image Furnace reaches 2100 °C without external cooling.
- Lasers: 5 x 400 W
- Heating 400-3000 °C
- Crystal up to 150 mm
- IR furnace up to 2100 °C
Choosing a PPMS platform or MPMS 3
Quantum Design was established in 1982 in San Diego, California, and makes materials characterization systems for physics, chemistry, materials science and nanotechnology. The main platforms are PPMS DynaCool, PPMS VersaLab and the MPMS 3 SQUID magnetometer; all three are cryogen-free.
DynaCool suits 9, 12 or 14 T fields and 1.8-400 K, with sub-kelvin options down to 50 mK. VersaLab is a compact 50-400 K system with fields up to 3 T for teaching laboratories and shared facilities.
MPMS 3 covers SQUID magnetometry with a 7 T magnet from 1.8 to 400 K. The legacy PPMS is discontinued, with manufacturer service stated until the end of 2028.
Optical cryostats and cryogenics
OptiCool cryostats cover 1.7-350 K. The Vector configuration gives up to ±4 T perpendicular to the optical table and ±1 T in its plane; the magnet-free Flex has a 4 K thermal bus for additional cooled components. RF coax wiring provides four cables for signals up to 20 GHz.
The HAC 900 (2.5 kW class, air-cooled) and HLC 4900 (8 kW class, water-cooled) helium compressors run Gifford-McMahon and pulse tube cold heads. For single crystal growth Quantum Design makes a laser floating zone furnace and the 2-mirror IR Image Furnace.
Quantum Design group and manufacturer service
In 2026 Quantum Design closed the acquisition of Qnami, the Swiss maker of scanning NV microscopes. Under a 2025 distribution agreement Quantum Design sells the ELDICO ED-1 electron diffractometer in North America, China, Europe, India, Japan and several other regions.
The Quantum Design customer service team supports instruments of its own brand and of distributed partners: troubleshooting, routine maintenance, repairs, replacement parts, new installations and initial training; engineers can often log in to a system remotely.
Quantum Design and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Quantum Design and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Qnami
- Equipment and parts for ELDICO Scientific
- Equipment and parts for Montana Instruments
- Equipment and parts for Biolin Scientific
Documents and sources
- About Quantum Design — founded in 1982
- Quantum Design home — product areas
- Quantum Design news — Qnami and ELDICO
- Customer service — instrument support
- PPMS DynaCool — specifications and options
- PPMS VersaLab — specifications and options
- Legacy PPMS — end of service
- MPMS 3 magnetometer — specifications and options
- OptiCool cryostats — configurations
- Helium compressors — HAC 900 and HLC 4900
- Laser Furnace — specifications
- IR Image Furnace — overview
