ADVACAM detectors and X-ray cameras

Technical selection of ADVACAM photon-counting detectors: WidePIX CHROMATIC and DYNAMIC cameras, AdvaPIX MAGIC detectors, MiniPIX mini cameras, silicon and CdTe sensors, PIXet Pro software.

WidePIX CHROMATIC X-ray cameras

Multi-chip cameras on Medipix3 chips for spectral radiography and industrial CT scanners. 55 µm pixels, up to 170 fps and two energy thresholds per pixel. The single-row CHROMATIC 10 (14 × 140 mm) supports hardware TDI for conveyor scanning; the double-row CHROMATIC 20 covers 28 × 140 mm.

  • Medipix3 chip, 55 µm pixel
  • Up to 170 fps
  • Min energy 5 keV (Si), 8 keV (CdTe)
  • 2000 g, Ethernet link

WidePIX Industry and SenseEdge cameras

Industrial WidePIX CHROMATIC builds: one Ethernet cable carries data and power; the water-cooling interface sits at the front or sides on Industry and at the sides on SenseEdge. SenseEdge senses right to its edge, suited to corner welds. Sizes 5 (14 × 70 mm) and 10 (28 × 70 mm).

  • Up to 170 fps (1×5), up to 80 fps (2×5)
  • Data and power over Ethernet
  • Water-cooling interface
  • Weight 1700 g

WidePIX CHROMATIC 25 camera

A square array of 25 Medipix3 tiles on a CdTe sensor: a 70 × 70 mm field and 1,638,400 pixels. Up to 170 fps and a 5 Gbit/s data stream; all segments are synchronized and external triggering is supported. The camera links to a computer through five Ethernet cables.

  • Field 70 × 70 mm
  • 1,638,400 pixels
  • 5 Gbit/s data stream
  • Weight 4910 g

WidePIX DYNAMIC Industry cameras

Industrial cameras on Timepix2 chips with a silicon sensor. Frame rate depends on counter depth: up to 150 fps at 14 bits, 210 fps at 10 bits and 500 fps at 4 bits. Signal-to-noise ratio is over 2,000 and energies down to 3 keV are detected. Power over Ethernet, water cooling.

  • Timepix2 chip, silicon sensor
  • Up to 500 fps at 4 bits
  • Signal-to-noise over 2,000
  • Energies from 3 keV

AdvaPIX MAGIC detector

A Timepix3 detector (formerly AdvaPIX TPX3) that records every particle hit in a continuous data stream: position, energy and time of arrival. Sensitive area 14 × 14 mm, 1.6 ns time resolution, up to 38 million hits/s and 3 keV minimum detectable X-ray energy. USB-C 3.1 link, 252 g.

  • Timepix3 chip, 14 × 14 mm
  • Time resolution 1.6 ns
  • Up to 38 million hits/s
  • USB-C 3.1, 252 g

AdvaPIX MAGIC Quad and Dual detectors

Quad carries four synchronized Timepix3 chips over a 28 × 28 mm area (262,144 pixels), up to 47 million pixels/s, external 12 V power and 905 g. Options: a central hole for the primary beam or an L-shape build for XRD, WAXS and SAXS. Dual uses two chips over 28 × 14 mm.

  • Quad: 28 × 28 mm area
  • Quad: up to 47 million pixels/s
  • Option: hole for the beam
  • Dual: 28 × 14 mm area

MiniPIX MAGIC and SPRINTER mini cameras

USB cameras, 80 × 21 × 14 mm, with a 256 × 256 matrix of 55 µm pixels. MiniPIX MAGIC on Timepix3 reads up to 2.3 million hit pixels/s at 1.6 ns time resolution; Flex drops the housing for integration. MiniPIX SPRINTER on Timepix2 reaches up to 99 fps with four counters per pixel.

  • MAGIC: up to 2.3 million hits/s
  • MAGIC: weight 40 g
  • SPRINTER: up to 99 fps
  • SPRINTER: weight 37 g

MiniPIX BASIC and EDU cameras

MiniPIX BASIC (formerly MiniPIX TPX Standard) on a Timepix chip reads up to 55 fps at 1 ms exposure; the standard sensor is 300 µm silicon. MiniPIX EDU for physics classes runs up to 45 fps in Pixet Basic. The EDU kit adds holders and a collimator; radiation sources are not included.

  • BASIC: up to 55 fps
  • BASIC: 88.9 × 21 × 10 mm, 30 g
  • EDU: up to 45 fps
  • EDU: operates at 0–55 °C

Choosing an ADVACAM detector

ADVACAM s.r.o. is a Czech designer and producer of photon-counting detectors, founded in 2013 and based in Prague. Its technology grew out of the Medipix collaboration at CERN, and the company remains part of the Medipix team.

The cameras use direct conversion: every photon is registered and counted in its own pixel.

In 2025 the models were renamed by chip type: first-generation Timepix devices are MiniPIX BASIC, Timepix2 devices are SPRINTER (MiniPIX and AdvaPIX) or DYNAMIC (WidePIX), Timepix3 devices are MAGIC, and Medipix3 cameras are WidePIX CHROMATIC.

Single-row WidePIX builds with TDI suit conveyor scanning, while AdvaPIX MAGIC and MiniPIX MAGIC track single particles with precise timing.

Sensors and energy ranges

Detectors come with silicon or cadmium telluride (CdTe) sensors. For AdvaPIX MAGIC the maker lists typical photon energy ranges: 100 µm silicon 3–20 keV, 300 µm silicon 5–40 keV, 1000 µm CdTe 20–150 keV.

WidePIX CHROMATIC is offered with 500 µm silicon or 1000 µm CdTe, with a minimum detectable energy of 5 keV for silicon and 8 keV for CdTe. AdvaPIX MAGIC and Quad sensors can be adapted for neutron imaging by depositing a 6LiF converter layer.

Integration and software

PIXet Pro software ships with the detector and runs on Windows, macOS and Linux; besides the graphical interface it has an API, and plug-in modules are written in C++. For building a camera into your own equipment the maker provides Python and C++ APIs.

For integration there are housing-free Flex builds (MiniPIX MAGIC Flex) and external triggering on WidePIX CHROMATIC 25. On request ADVACAM builds detectors into existing equipment or engineers an OEM product.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.