Montana Instruments optical cryostats
Technical selection of Montana Instruments equipment: CryoAdvance 50 and 100, Cryostation s200, Cryostation 200 PT and RapidCycle 100 EC closed-cycle cryostats, Cryo-Optic, Magneto-Optic and OneK-Optic modules and The Rook nanopositioner.
CryoAdvance 50 and 100 optical cryostats
CryoAdvance cryostats are closed-cycle and run without liquid helium. The models differ by sample chamber diameter: 50 mm on the CryoAdvance 50 and 100 mm on the CryoAdvance 100. With the ATSM, temperature is controlled from below 3.2 K to 350 K. Setpoints and ramping run via REST API.
- CryoAdvance 50: 50 mm chamber
- CryoAdvance 100: 100 mm chamber
- With ATSM: <3.2 to 350 K
- Cryogen-free, closed-cycle
Cryostation s200 cryostat
The Cryostation s200 is a closed-cycle cryostat with 200 mm of sample space. With the ATSM, temperature is controlled from below 3.6 K to 350 K, and the maker states nanometer-level vibrations. Radial ports and a top window give sample access; it mounts directly to an optical table.
- 200 mm sample space
- With ATSM: <3.6 to 350 K
- Nanometer-level vibrations
- Mounts to an optical table
Cryostation 200 PT cryostat
The Cryostation 200 PT uses a pulse tube cryocooler and gives more than 250 mW of cooling at 4.2 K. Over 20 W on the first stage and six vacuum feedthroughs allow up to 100 RF or DC connections. It has a 200 mm breadboard, and its documents include the Sumitomo F-70 compressor manual.
- Over 250 mW at 4.2 K
- Over 20 W on the first stage
- Six vacuum feedthroughs
- Up to 100 RF or DC lines
RapidCycle 100 EC cryostat
The RapidCycle 100 EC is a closed-cycle cryostat for testing electrical components at 4 K. Cooldown to 4.2 K takes less than an hour, and a full cooldown and warmup cycle with sample exchange takes under 2.5 hours. It has a 100 mm platform, over 300 mW at 4.2 K and user-added RF and DC feedthroughs.
- Cooldown to 4.2 K under 1 hour
- Full cycle under 2.5 hours
- Over 300 mW at 4.2 K
- 100 mm sample platform
Cryo-Optic optical module
The Cryo-Optic places a microscope objective inside the sample space: it stays at room temperature, and objective and sample temperatures are held to better than 10 mK. The kit has a vacuum housing, radiation shield, heater ring and a Zeiss objective. Versions fit 50 and 100 mm platforms.
- Control better than 10 mK
- 100x/0.90 NA objective, 1.0 mm WD
- 100x/0.75 NA objective, 4.0 mm WD
- 50 and 100 mm platforms
Magneto-Optic magnetic field module
The Magneto-Optic integrates a bipolar magnet into the sample chamber for fields up to 0.7 T and fits the CryoAdvance 50. Field uniformity varies less than 0.1% in the central 6 mm with a 12 mm pole gap. A 500 W, 20 bit bipolar current source drives the magnet; a chiller cools the coils.
- Fields up to 0.7 T
- Uniformity within 0.1% over 6 mm
- 500 W, 20 bit current source
- Fits the CryoAdvance 50
OneK-Optic 1.2 K module
The OneK-Optic is a closed-cycle add-on for CryoAdvance 100 systems that cools the sample space to 1.2 K. It gives over 8 hours at 1.2 K with 200 µW of cooling, then recycles automatically and is ready for test in under 3 hours. The housing has 2 side windows and RF and DC panels.
- 1.2 K base temperature
- Over 8 hours at 1.2 K
- Recycle in under 3 hours
- Fits the CryoAdvance 100
The Rook nanopositioner
The Rook is a 3-axis XYZ piezo-driven nanopositioner of ceramic and titanium. Specifications are measured at the top of the positioner in a 4 K vacuum on a 100 mm platform. Motion parameters adjust to the platform temperature. It is built for the CryoAdvance and also fits the Cryostation s200.
- XYZ axes, piezo drive
- Ceramic and titanium build
- Measured in vacuum at 4 K
- For CryoAdvance and s200
Choosing a Montana Instruments platform
Montana Instruments Corporation of Bozeman, Montana, USA, makes closed-cycle optical cryostats, optic modules and cryogenic nanopositioners. The company was founded in 2010, and in 2022 the Swedish company Atlas Copco acquired it.
The platform is chosen by sample space and task: the CryoAdvance 50 with a 50 mm chamber and the CryoAdvance 100 with a 100 mm chamber, the Cryostation s200 with 200 mm of sample space, the Cryostation 200 PT with a pulse tube and over 250 mW at 4.2 K for high line counts, and the RapidCycle 100 EC for electrical testing at 4 K with a full cycle under 2.5 hours.
Optic modules and positioning
The Cryo-Optic holds a Zeiss objective at room temperature inside the sample space, with objective and sample temperatures controlled to better than 10 mK. The Magneto-Optic for the CryoAdvance 50 gives fields up to 0.7 T, and the OneK-Optic for the CryoAdvance 100 cools the sample to 1.2 K.
The Rook nanopositioner moves the sample in three axes with a piezo drive; its specifications are measured at 4 K in vacuum. For the CryoAdvance there are a manual positioner, the ATSM for localized sample temperature control and PCB sample mounts for RF and DC lines.
Control in Galaxy software
Galaxy software comes with every cryostat and controls Montana Instruments equipment: the Cryo-Optic and Magneto-Optic modules, the Rook nanopositioner, turbo vacuum and additional temperature channels. A REST API allows programmatic control, with examples in Python, MATLAB, LabVIEW and C#.
Cooldown and warmup start with one button on the touchscreen. The onboard database stores every cooldown cycle, including the last one at the factory, for performance comparison over time; web dashboards open in a browser on Windows, macOS and Linux.
Montana Instruments and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Montana Instruments and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Kohzu Precision
- Equipment and parts for Chuo Precision Industrial / Chuo Seiki
- Equipment and parts for EKSPLA
- Equipment and parts for Gamry Instruments
Documents and sources
- Montana Instruments — home page
- About us — company timeline
- CryoAdvance cryostats — product family
- CryoAdvance 50 — documentation
- CryoAdvance 100 — documentation
- CryoAdvance configurator — options
- Cryostation s200 — specifications
- Cryostation 200 PT — specifications
- Cryostation 200 PT — documentation
- RapidCycle 100 EC — specifications
- RapidCycle 100 EC — documentation
- Cryo-Optic module — overview
- Cryo-Optic module — kit and objectives
- Magneto-Optic module — specifications
- OneK-Optic — specifications
- OneK-Optic — documentation
- The Rook nanopositioner — overview
- The Rook nanopositioner — documentation
- Galaxy software — system control
- Service offerings — diagnostics and maintenance
- Replacement parts — coverage
- Accessories catalog — mounts and I/O
