Onto Innovation Metrology, Inspection and Lithography Systems
Onto Innovation metrology, inspection and lithography systems for wafer, chip and advanced packaging fabs: Atlas, Iris, Echo, Element, Dragonfly, NSX, NovusEdge and JetStep. Selection by technical specification.
Atlas® G6, V and III+ OCD Metrology Systems
Atlas systems measure OCD and thin films on logic, DRAM and 3D NAND wafers. Atlas V pairs a DUV 4×4 Mueller Matrix ellipsometer with a polarized normal incidence reflectometer (NIOCD). Atlas G6 adds a smaller optical spot; Atlas III+ covers OCD and film layers from FEOL to BEOL.
- Atlas V: 4×4 Mueller Matrix SE
- Atlas V: NIOCD channel
- Atlas III+: FEOL to BEOL
- Ai Diffract modeling
Iris™ and IMPULSE® Film Metrology for CMP
Iris S measures films, OCD, wafer bow and film stress on 150, 200 and 300 mm Si, SiC, GaN and glass wafers. Iris G2 controls ultra-thin multilayer films of 10–50 Å with DUV spectroscopic ellipsometry. IMPULSE V and IMPULSE+ run integrated or standalone in the CMP module together with Atlas.
- Iris S: 150/200/300 mm wafers
- Iris G2: 10–50 Å films
- Si, SiC, GaN and glass
- IMPULSE: integrated or standalone
Aspect® Infrared OCD and Echo™ Picosecond Metrology
Aspect profiles high aspect ratio structures in the Z dimension with infrared OCD (IRCD) for 3D NAND, DRAM, CIS and power devices. Echo applies picosecond ultrasonics to metal films from 50 Å to 35 µm, implant monitoring and thermal conductivity, mapping full wafers with 0.5 mm edge exclusion.
- Echo: metal films 50 Å–35 µm
- Echo: 0.5 mm edge exclusion
- Aspect: Z-dimension profiling
- Aspect: IRCD method
Element™ FTIR and Non-Contact CV Systems
Element G2 and Element S measure epi layer thickness and dielectric composition (BPSG, FSG, SiN) with FTIR. Element G2 has a 2 mm circular IR spot; Element S takes 100–200 mm wafers and up to five epi layers. FAaST and CnCV measure dielectrics by corona charge and a Kelvin probe.
- Element G2: 2 mm IR spot
- Element S: 100–200 mm wafers
- Element S: up to five epi layers
- CnCV: mercury-free SiC, GaN
Dragonfly® and Firefly® Packaging Inspection
Dragonfly G5 and G3 pattern inspection for advanced packaging combines 2D line scan imaging, 3Di bump height metrology and IR imaging for embedded defects. Dragonfly G5 detects submicron defects down to 150 nm. Firefly G5 inspects AICS substrates and FOPLP panels; Clearfind finds residue on metal.
- Dragonfly G5: down to 150 nm
- 3Di bump height metrology
- IR channel: embedded defects
- Firefly G5: AICS and FOPLP
NSX® 330, F30™ Macro Inspection and EB40™ Module
NSX 330 performs macro inspection and 2D/3D metrology on 100–330 mm wafers, bumps, RDL, TSV, thickness, warp. F30 uses a five-objective turret with brightfield and darkfield channels on 100–300 mm wafers after develop, CMP and etch. The EB40 module inspects bevel and backside, Zones 1 to 5.
- NSX 330: 100–330 mm wafers
- F30: five-objective turret
- F30: 100–300 mm wafers
- EB40: edge Zones 1–5
NovusEdge®, PrimaScan™ and Celero™ Bare Wafer Inspection
NovusEdge G2 inspects edge, notch and backside of 300 mm unpatterned wafers and sorts them by recipe. PrimaScan uses laser scatterometry to find particles, scratches and contamination on substrates; PrimaScan P covers glass panels. Celero PL finds subsurface defects on 100–300 mm SiC and GaN wafers.
- NovusEdge G2: 300 mm wafers
- Celero PL: SiC, GaN 100–300 mm
- PrimaScan P: glass panels
- Recipe-based wafer sorting
JetStep® Panel Steppers and IVS Overlay Metrology
JetStep X500 and S3500 panel steppers expose AICS substrates and FOPLP panels made of CCL, FR4, composite or glass. S3500 has a 59.4 x 59.4 mm exposure field, 2/2 L/S resolution with a 1/1 option and StepFAST die shift correction. IVS 380 and IVS 280 measure overlay, CD and z-height of features.
- S3500: 59.4 x 59.4 mm field
- S3500: 2/2 L/S resolution
- IVS 280: 100–200 mm wafers
- IVS 380: SMIF and FOUP ports
Selecting Onto Innovation Systems by Task
Onto Innovation combines inspection, metrology, lithography and software for semiconductor manufacturing.
Atlas G6, Atlas V and Atlas III+ serve OCD and film control in logic and memory, IMPULSE V and IMPULSE+ serve the CMP module, and Iris S covers 150–300 mm wafers in specialty and packaging lines. Echo measures metal films from 50 Å to 35 µm; Element G2 and Element S measure epi layers.
For advanced packaging, the line-up includes Dragonfly G5 and G3 inspection, NSX 330 macro inspection for 100–330 mm wafers, JetStep panel steppers and IVS overlay metrology. NovusEdge G2, PrimaScan and Celero PL inspect bare wafers and SiC or GaN substrates.
Systems are matched by wafer size, substrate material and process step.
Onto Innovation Company and Sites
Onto Innovation Inc. is headquartered in Wilmington, Massachusetts, with a worldwide sales and service organization. Sites in Milpitas (California), Wilmington, Bloomington (Minnesota), Budd Lake (New Jersey), Snoqualmie (Washington) and Tucson (Arizona) operate under ISO 9001:2015.
The portfolio spans unpatterned wafer quality, 3D metrology, macro defect inspection of wafers and packages, metal interconnect composition, factory analytics and lithography for advanced semiconductor packaging.
Onto Innovation and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Onto Innovation and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Seren IPS
- Equipment and parts for Spellman
- Equipment and parts for MDC Precision
- Equipment and parts for Kohzu Precision
- Equipment and parts for Zumbach Electronic
Documents and sources
- Home page — company overview
- About Us — headquarters and sites
- Service programs — support and parts
- Products — full index
- Metrology — OCD and films
- Inspection — wafers and panels
- Lithography — packaging steppers
- Atlas G6 System — OCD metrology
- Atlas V System — OCD metrology
- Atlas III+ System — OCD metrology
- Iris S System — films and OCD
- Iris G2 System — thin films
- IMPULSE V System — CMP metrology
- IMPULSE+ System — CMP metrology
- Aspect System — infrared OCD
- Echo System — picosecond ultrasonics
- Element G2 System — epi metrology
- Element S System — epi metrology
- FAaST CV/IV System — non-contact electrical
- CnCV System — WBG materials
- Dragonfly G5 System — packaging inspection
- Dragonfly G3 System — pattern inspection
- Firefly G5 System — substrates and panels
- NSX 330 System — macro inspection
- F30 System — automated inspection
- EB40 Module — edge and backside
- NovusEdge G2 System — bare wafer edge
- PrimaScan System — substrate defects
- PrimaScan P System — glass panels
- Celero PL System — SiC and GaN wafers
- JetStep X500 System — panel lithography
- JetStep S3500 System — FOPLP panels
- IVS 380 System — overlay metrology
- IVS 280 System — overlay metrology
- PrecisionWoRx VX4 System — probe cards
- 4Di InSpec Surface Gauge — surface defects
- 4Di InSpec AMS — automated measurement
