Zumbach Electronic Inline Measurement & Control Systems
Zumbach Electronic gauges and controllers for real-time diameter, wall thickness, concentricity, profile, and spark fault monitoring across wire, cable, pipe extrusion, and steel mills.
ODAC® Laser Diameter Gauges & DVW/DVO Units
ODAC 2–550 and dual-axis 14XY–230XY laser heads measure diameter, ovality, width, and height of cables, pipes, rods, and wires. DVW 1 and DVO 2 units compensate for twist. Spares cover optical windows, optics modules, scanner drives, M23 cables, and I/O boards.
- Range 0.012–520 mm
- 1–3 axes up to 3,000 scans/s
- DVW ±10° / DVO ±50°
- PROFINET, EtherNet/IP
UMAC® WALLMASTER Ultrasonic Wall Thickness Systems
UMAC A, RZ, Z, R systems with UMAC CI processors measure wall thickness and eccentricity on polymer, rubber, and composite pipes, hoses, and cables. Up to 5 layers are tracked across 4–8 points. Spares cover ultrasonic transducers, holders, SPV-1 valves, and DSP boards.
- Wall 0.05–99.95 mm
- Diameter 0.2–400 mm
- Up to 5 layers, 15,000 scans/s
- UMAC CI, OPC UA, PROFINET
RAYEX® D & RAYEX® S X-Ray Measurement Systems
Dynamic RAYEX 160D/220D for CV/XLPE power cable lines and static RAYEX S 20/50/110 measure wall thickness, eccentricity, and ovality without coupling media. Readings remain independent of product temperature. Replaceable modules include X-ray sources, detectors, HV units, and tube segments.
- RAYEX D: OD 15–140 mm
- RAYEX S: OD 1.5–100 mm
- Up to 4 layers, ±0.03 mm rep.
- OPC UA, PROFINET, TCP/IP
PROFILEMASTER® PMM & SPS Profile Systems
PMM 30/50/80/130-4K/160-6K and hot-mill SPS 50–800 use 4–8 camera laser triangulation with direct DXF import. They inspect plastic, rubber, cold metal, and hot-rolled steel profiles up to 1200 °C. Spare parts cover CMOS cameras, laser emitters, thermal cooling units, and optical windows.
- PMM: 2–144 mm, up to 150/s
- SPS: 5–720 mm, up to 2,000 Hz
- Up to 4 strands, ±0.010 mm
- Hot rolling up to 1200 °C
STEELMASTER & BENDCHECK Mill Measurement Systems
Static SMS 100-SX and rotating SMR 100/160-SX gauges monitor wire rod, bars, and tubes in hot and cold rolling mills. BENDCHECK 100/160/230/310 inspect straightness across 3–5 stations without bar rotation. Spares include rotating heads, optical windows, air-purge manifolds, and drive motors.
- STEELMASTER: OD 4–500 mm
- Up to 6,000 scans/s
- BENDCHECK: OD 15–290 mm
- Repeatability ±0.01 mm
ODEX® Concentricity & CAPAC® Capacitance Systems
ODEX 10 heads combine dual-axis laser scanning and magnetic sensing to verify conductor centering in LAN, RF, and automotive cables. CAPAC MR.12/36/68 monitor capacitance, pinholes, and SRL up to 6.5 GHz. Replaceable components include inductors, measuring tubes, guard electrodes, and sensor cables.
- ODEX 10: OD 0.08–13 mm
- Eccentricity ±0.5 µm
- CAPAC: up to 1800 pF/m ±0.1
- FFT & SRL up to 6.5 GHz
Sparktester, KW & SIMAC® Fault Inspection Systems
Sparktester AST H 15A, AST L, and DST 10/28A test wire and cable insulation up to 40 kV AC and 28 kV DC per IEC 62230 and UL 1581. Optical KW TRIO and 4-camera SIMAC 40/70/120 detect flaws from 0.01–0.2 mm. Spares include bead chains, brush electrodes, SP 40A calibrators, and LED panels.
- Up to 40 kV AC / 28 kV DC
- KW TRIO: flaws from 0.01 mm
- SIMAC: 4 cams, 140,000 scans/s
- Speeds up to 3,000–7,500 m/min
USYS® Controllers, Preheaters & GaugePro Units
USYS 20, 200, Touch, IPC 1e/2e, and CELLMASTER link up to 14 sensors and 5 control loops with SIGMA EXPERT and CpK Pilot. Auxiliary units cover WST8/16/25 preheaters, AUTAC 300 pyrometers, and GaugePro 8/22 testers. Spares include VISU-Touch HMIs, I/O cards, and PSUs.
- Up to 14 sensors, 5 loops
- Preheater: 0.32–5.7 mm, 200 °C
- AUTAC 300: 10–300 °C wire
- GaugePro 8/22: OD 2.5–22 mm
Inline Measurement Architecture of Zumbach Electronic Systems
Founded in 1957 in Orpund, Switzerland, Zumbach Electronic AG develops non-contact measurement and control systems for wire and cable manufacturing, plastic and rubber extrusion, and hot or cold steel rolling.
Field sensors including ODAC laser gauges, UMAC ultrasonic units, RAYEX X-ray systems, CAPAC meters, ODEX core gauges, and Sparktesters connect into centralized USYS processors.
Real-time closed-loop regulation via SIGMA EXPERT and CpK Pilot reduces startup scrap, tightens dimensional tolerances, and exports batch SPC traceability over PROFINET, EtherNet/IP, and OPC UA.
Technical Criteria for Line Configuration
For cable and wire lines, system selection depends on product outer diameter (from 0.012 mm on ODAC 2 up to 140 mm on RAYEX 220D), conductor eccentricity or capacitance limits (ODEX 10, CAPAC with 6.5 GHz SRL prediction), spark test voltage (up to 40 kV AC / 28 kV DC), and line speed up to 3,000–7,500 m/min.
For pipe, hose, and profile extrusion or steel rolling mills, configurations match wall thickness (from 0.05 mm on UMAC), multi-layer counts (up to 5 layers), material temperature up to 1200 °C on PROFILEMASTER SPS, and multi-strand inspection of up to 4 strands.
Zumbach Electronic and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Zumbach Electronic and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Yuheng Optics
- Equipment and parts for Yudian Automation
- Equipment and parts for Xylem Analytics
- Equipment and parts for Yaskawa
Documents and sources
- Zumbach Electronic AG — About Us & ISO 9001:2015
- Zumbach Electronic — Global & Shanghai Locations
- Zumbach Electronic — Service, Calibration & Spare Parts
- ODAC® — Laser Diameter & Ovality Gauges
- DVW / DVO — Oscillating & Pivoting Units for ODAC®
- UMAC® WALLMASTER — Ultrasonic Wall Thickness Systems
- RAYEX® D — Dynamic X-Ray Measuring Systems
- RAYEX® S — Static X-Ray Measuring Systems
- PROFILEMASTER® PMM — Profile Measuring Systems
- PROFILEMASTER® SPS — Steel Profile Measuring Systems
- STEELMASTER — Wire Rod, Bar & Tube Measuring Systems
- BENDCHECK — In-Line Bar & Pipe Straightness Systems
- ODEX® — TrueCore Concentricity Measurement Systems
- CAPAC® — Inline Capacitance & SRL Systems
- Sparktester — Electrical Insulation Testing
- KW TRIO — Optical Lump & Neckdown Detectors
- SIMAC® — Inline Surface Inspection Systems
- USYS® — Data Processors & Line Controllers
- Preheater WST — Inductive Wire Preheating Systems
- AUTAC 300 — Conductor Temperature Measurement
- GaugePro — Off-Line Ultrasonic Tubing Metrology
