Kohzu Precision positioning stages and systems
Technical selection of Kohzu Precision stages: XA/YA linear, ZA vertical, RA rotation, SA swivel, YRA and RSTA alignment, MV vacuum stages, MPS/SMR/USM manipulators and Dyvoce profilometers.
Motorized X/XY stages
Montblanc series XA, YA, SXA and SYA linear stages range from a 40×40 mm table (XA04A-R102) to 200×218 mm (XA20F-L2501: ±250 mm travel, 980 N load). The XA07A-R202 runs on a cross roller guide with a 1.0 mm lead ball screw and repeatability of ≦±0.2 μm.
- XA04A-R102 table 40×40 mm
- XA20F-L2501 travel ±250 mm
- XA20F-L2501 load 980 N
- XA07A-R202 lead 1.0 mm
ZA vertical stages
ZA stages move the load vertically, from the ZA04A-W101 (40×40 mm table, ±2.5 mm travel) to the ZA16A-32F01 (160×160 mm, ±25 mm, 490 N); the ZA10A-X1T01 travels ±50 mm. The ZA10A-X102 is an XA10A-R102 stage on a bracket with a 0.5 mm lead ground screw and ≦±0.3 μm repeatability.
- ZA16A-32F01 travel ±25 mm
- ZA16A-32F01 load 490 N
- ZA10A-X1T01 travel ±50 mm
- ZA10A-X102 lead 0.5 mm
RA rotation stages
RA rotation stages run from the RA04A-W01 (Φ40 mm, ±177°) to the RA30A-WH01 (Φ298 mm, ±170°, 980 N horizontal load). The RA10A-W01 uses a 1/180 worm and worm wheel on angular bearings, with eccentricity of ≦5 μm/360°; a full 360° version is available on request.
- RA04A-W01 range ±177°
- RA30A-WH01 table Φ298 mm
- RA10A-W01 worm gear 1/180
- RA10A-W01 eccentricity ≦5 μm
SA swivel stages
SA swivel stages range from the SA04B-RT02 (40×40 mm, ±10°) to the SA16A-RT01 (160×160 mm, ±10°, 196 N). The SA07A-RM02 has a cross roller guide, a worm drive and a 96 mm work distance. A 60 kg stainless steel heavy duty goniometer is custom-made.
- SA16A-RT01 range ±10°
- SA16A-RT01 load 196 N
- SA07A-RM02 work distance 96 mm
- Goniometer for 60 kg
XYθ alignment stages
Kohzu builds three types for camera-guided alignment: integrated YRA XYθ stages, stacked Montblanc single-axis stages and RSTA stages, where 3 to 4 units jointly produce XYθ motion, with large through holes. YRA-070: 70×70 mm table, ±3 mm and ±3°, 45 mm body. YRA-200: 210×150 mm table, 343 N load.
- YRA-070 travel ±3 mm
- YRA-070 body 45 mm
- YRA-200 table 210×150 mm
- YRA-200 load 343 N
MV vacuum stages
MV vacuum stages come as X, Z, rotation and swivel stages, from the MVXA05A-R102 to the MVXA16A-R101 (160×124 mm table, ±30 mm travel). The MVXA07A-R202 carries a vacuum-compatible 5-phase stepper motor rated 1.4 A and a vacuum D-Sub 9-pin connector. The MV series is not suitable for baking.
- MVXA16A-R101 travel ±30 mm
- MVXA07A-R202 motor 1.4 A
- MVXA07A-R202 D-Sub 9-pin
- Not for baking
Compact 6-axis manipulators
MPS, SMR and USM units serve optics and electronics assembly: MPS-SSSD-B010 for 3-plate LCD projectors and medical cameras (X travel ±5 mm), SMR-6B201 for mobile and in-vehicle camera modules, USM-R1C-010 for camera modules and small semiconductor devices. SMR and USM have ball screws on all axes.
- MPS-SSSD-B010 X travel ±5 mm
- USM-R1C-010 about 3 kg
- Six axes in one unit
- USM centralized connector
KOSMOS motor controllers
Stage stepper motors are driven by KOSMOS controllers: the 2-axis CRUX-D with a built-in driver and the INCOM handy terminal, and the multi-axis ARIES and LYNX with TITAN driver boxes and the PYXIS touch panel. MD-55F to MD-455F drivers, CB motor cables and Chamonix II software are also offered.
- 2-axis CRUX-D
- Multi-axis ARIES and LYNX
- RS-232C, USB, Ethernet
- MD series drivers
Choosing a Kohzu Precision stage
Kohzu Precision Co., Ltd. was established on October 2, 1957; its head office is in Kawasaki, Kanagawa, Japan, and it has 130 employees.
The business began in 1945 with the repair of surveying and measuring instruments and now makes positioning stages and instruments for materials research and semiconductor wafers.
The Montblanc series covers motorized and manual X/XY, Z, rotation and swivel stages, fine pitch positioners and heavy duty goniometers. Stages are chosen by table size, travel and load: from 40×40 mm and ±5 mm on the XA04A-R102 to 200×218 mm, ±250 mm and 980 N on the XA20F-L2501.
Every motorized stage passes a standard accuracy inspection.
Dyvoce wafer measurement
Dyvoce profilometers measure surface profile and thickness without contact using a laser displacement meter. The DY-2000RC and DY-3000RC work C to C with wafers up to 12 inches, measure to SEMI standards and support SECS/GEM/GEM300.
The DY-3001YM is a manual single-wafer unit for samples up to 300 mm square. It measures Si and diamond, SiC, GaN, Ga2O3 and LT/LN: SORI, bow, warp, GBIR, TTV, film thickness and flatness.
Synchrotron instruments and TSS simulators
For X-ray experiments at synchrotron facilities Kohzu builds custom instruments: double crystal monochromators, GHM-13B 4-blade slit systems, the KTG-15D goniometer and the ECQ-2 Eulerian cradle. The product guide is sorted by XRD, SAX and XAFS techniques.
The TSS-1000 3-axis simulator drives pitch, yaw and roll with servo motors at 0.1 to 10 Hz sine frequencies, and the 2-axis TSS-M0210Y is used to measure image stabilization in accordance with CIPA DC-011-2012.
Standard stages are modified on request: travel, vacuum or clean grease, motor and encoder.
Kohzu Precision and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Kohzu Precision and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
Documents and sources
- Kohzu Precision — company profile and history
- About Kohzu — business overview
- Kohzu Precision — home page
- Positioning stages — catalog section
- Motorized X/XY stages — model list
- XA07A-R202 — specifications
- Motorized Z stages — model list
- ZA10A-X102 — specifications
- Motorized rotation stages — model list
- RA10A-W01 — specifications
- Motorized swivel stages — model list
- SA07A-RM02 — specifications
- Heavy duty goniometer — overview
- Alignment stages — catalog section
- YRA-070 — specifications
- YRA-200 — specifications
- Vacuum compatible stages — catalog section
- Vacuum X stages — model list
- MVXA07A-R202 — specifications
- Motorized 6-axis stages — overview
- Control electronics — catalog section
- SC series controllers — end of support notice
- Stepping motors — nameplate change notice
- ZM05A-C1K manual Z stage — discontinuation notice
- Overhaul and repair — manufacturer terms
- Encoders for stages — overview
- Dyvoce wafer profilometers — overview
- Synchrotron instrumentation — catalog section
- Synchrotron products — list by category
- Synchrotron products — list by application
- TSS-1000 blur vibration simulator — overview
- TSS-M0210Y blur vibration simulator — overview
- Custom-made units and OEM products — catalog section
- Downloads — manuals and catalogs
