Dongyue Machinery Group (Shandong Dongyue Machinery) AAC Plants, Autoclaves & QT Block Machines — Sizing & Sourcing
SpareX supports engineering selection and sourcing of Dongyue Machinery Group (Shandong Dongyue Machinery) turnkey AAC/ALC lines, autoclaves, QT block presses and spares by spec or nameplate.
Turnkey AAC Block Plants
Dongyue Machinery Group (Shandong Dongyue Machinery) builds turnkey AAC plants for 50,000–600,000 m³/year. Lines process fly ash or silica sand (60–70%), OPC 43/53 cement, lime, gypsum and aluminium powder. Blocks reach 400–700 kg/m³ (A1.5–A5.0). Spares cover batchers, gearboxes and chains.
- Capacity: 50,000–600,000 m³/year
- Inputs: fly ash or quartz sand, lime, cement
- Density 400–700 kg/m³, 0.10–0.18 W/(m·K)
- Spares: batchers, drives, chains, sensors
ALC Panel Production Lines
Dongyue Machinery Group (Shandong Dongyue Machinery) engineers ALC wall, floor and roof panel lines. Processes integrate German Kätzbergen systems with steel-cage assembly prior to pouring. Horizontal units slice panels down to 50 mm thickness. Replaceable parts include needles, grippers and chains.
- Products: wall, floor and roof ALC panels
- Ultra-thin panel capability down to 50 mm
- German Kätzbergen & steel-cage processing
- Spares: cage needles, grippers, chains, drives
90 kW AAC Slurry Mixing System
The slurry mixer uses a 90 kW switched reluctance motor, special controller and D-type V-belt drive. Hard nickel alloy cross blades run at 0–1480 rpm for cycles under 3.5 minutes. Automatic steam heating holds ±1 °C accuracy. Spares cover alloy blades, heavy-duty bearings, belts and sensors.
- Drive: 90 kW switched reluctance motor, D-belt
- Speed 0–1480 rpm, cycle < 3.5 minutes
- Automatic steam heating accuracy: ±1 °C
- Spares: nickel alloy blades, bearings, sensors
Three-Station AAC Cutting Line
The three-station distributed cutter holds 1 mm accuracy and chops top trimmings with a crushing knife for slurry recycling. Diagonal steel wires, three straight scrapers and rack-and-pinion lifting prevent wire drift. A rotary cylinder speeds tool changes. Spares include wires, scrapers and racks.
- Layout: 3-station cutting, 1 mm precision
- Rack-and-pinion lifting synchronization
- Rotary cylinder for fast panel tool change
- Spares: steel wires, scrapers, racks, knives
AAC Autoclaves & Pressure Vessels
Subsidiary Linyi Dongyue Pressure Vessel fabricates autoclaves up to 31.5 m long (DN600–DN3500) for 1.2 MPa (12 bar) steam curing. Units feature manual upper/side or automatic door control and whole or piece-wise delivery. Replaceable items include door gaskets, safety valves and interlocks.
- Size: up to 31.5 m length, DN600–DN3500
- Steam curing pressure: 1.2 MPa (12 bar)
- Manual upper/side & automatic door control
- Spares: door seals, safety valves, interlocks
Pouring Moulds & Packing Lines
Pouring moulds feature an integral bottom frame with Ytong butterfly spring locks for dimensional accuracy. Cutter and crane beams are machined on 10 m (33 t) and 6 m YJM (±0.008 mm) CNC gantry mills. Packing lines use a mobile separator. Spares cover side walls, spring locks and rollers.
- Integral mould frame, Ytong spring locks
- 6 m YJM CNC machining precision: ±0.008 mm
- Packing line with mobile block separator
- Spares: mould walls, spring locks, rollers
Automatic QT18-15 to QT8-15 Presses
Fully automatic QT18-15, QT12-15, QT10-15, QT9-15 and QT8-15 machines (45–116 kW) output 11,520–34,560 hollow blocks per 8 h shift (400×200×200 mm). Forming pressure is 15–20 MPa with 200–220 kN vibration on QT18-15 and 15 s cycles. Spares include 70,000-cycle carburised moulds and hydraulic valves.
- Models: QT18-15, QT12-15, QT10-15, QT9-15, QT8-15
- Output: 11,520–34,560 blocks/8h (45–116 kW)
- Forming pressure 15–20 MPa, 15 s cycle
- 70,000-cycle carburised moulds & hydraulics
Compact QT6-15 to QT4-24 & Spare Kits
QT6-15, QT6A-15 (45 kW), QT5-15 (37.2 kW), QT4-15 (24 kW) and manual QT4-24 (13.45 kW) output 2,880–11,520 blocks/8h. Lines pair 3-bin batchers, JS mixers and hemp-fibre pallets (5–6 yr life). Spare kits cover limit switches, chains, pads and contactors.
- Models: QT6-15, QT6A-15, QT5-15, QT4-15, QT4-24
- Output: 2,880–11,520 blocks/8h (13.45–45 kW)
- Hemp-fibre pallets with 5–6 year service life
- Kits: limit switches, chains, rubber pads, relays
AAC Block & ALC Panel Architecture by Dongyue Machinery Group (Shandong Dongyue Machinery)
Turnkey autoclaved aerated concrete plants span 50,000 to 600,000 m³/year capacity, engineered for fly ash or quartz sand (60–70% silica source) with OPC 43/53 cement, lime, gypsum and aluminium powder to yield 400–700 kg/m³ blocks (A1.5–A5.0, 0.10–0.18 W/(m·K)).
Reinforced ALC wall, floor and roof panel lines integrate steel-cage processing, a three-station distributed cutter holding 1 mm accuracy down to 50 mm ultra-thin panels, and 1.2 MPa (12 bar) steam autoclaving.
90 kW Slurry Mixing, CNC Mould Machining & In-House Autoclaves
The slurry mixer pairs a 90 kW switched reluctance motor (0–1480 rpm, <3.5 min cycle) with hard nickel alloy cross blades and ±1 °C steam heating control.
Integral bottom-frame pouring moulds use Ytong butterfly spring locks, while heavy beams are milled on 10 m (33 t) and 6 m YJM (±0.008 mm) CNC gantry machines.
Industrial autoclaves up to 31.5 m long (DN600–DN3500) are built in-house by subsidiary Linyi Dongyue Pressure Vessel Equipment Manufacturing with manual upper/side or automatic door control.
QT Series Concrete Block & Brick Making Line Matrix
Nine QT models scale from manual QT4-24 (13.45 kW, 2,880–3,600 blocks/8h) through mid-range automatic QT4-15..QT12-15 up to flagship QT18-15 (116 kW, 1400×1350×40 mm pallet, 18 blocks/mould, 25,920–34,560 hollow blocks/8h at 15–20 MPa forming pressure and 200–220 kN vibration).
Full lines combine 3-bin aggregate batchers, JS twin-shaft mixers, hemp-fibre pallets (5–6 yr life) and 70,000-cycle carburised moulds; submit target capacity, block size or nameplate details for a tailored SpareX quotation.
Dongyue Machinery Group and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Dongyue Machinery Group and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for KEDA SUREMAKER / Anhui Keda Industrial
- Equipment and parts for Hess AAC Systems
- Equipment and parts for Masa Group / Masa GmbH
- Equipment and parts for Wehrhahn
Documents and sources
- Dongyue Machinery Group official site — AAC, ALC plants & autoclaves
- About Dongyue Machinery Group — subsidiaries, pressure vessels & standards
- Production strength — 10 m (33 t) & 6 m YJM (±0.008 mm) CNC gantry mills
- AAC mixing system — 90 kW switched reluctance motor & temperature control
- AAC block cutting system — 3-station distributed cutting & 50 mm panels
- Technical review of Dongyue AAC/ALC cutting precision & automation
- QT series concrete block machines (QT4-24 to QT18-15) & spare-part kits
- Alpha Block Plant AAC production line project reference (Kokand)
