KEDA SUREMAKER / Anhui Keda Industrial AAC Plant Equipment & Parts Selection
Select complete AAC plant sections, cutting systems, autoclaves, packing lines and spare assemblies for KEDA SUREMAKER / Anhui Keda Industrial by duty or nameplate.
Turnkey AAC Block & Panel Plants
KEDA SUREMAKER / Anhui Keda Industrial supplies AAC block and panel plants for 250–700 kg/m³ density. Layouts support vertical and flat cake autoclaving. Lines use single-head or double-head autoclaves. Replaceable items include mould side plates, wheels and drives.
- Density range: 250–700 kg/m³
- Vertical & flat cake autoclaving
- Single-head & double-head autoclaves
- Spares: mould side plates, wheels, drives
Raw Material Preparation & Pouring
Raw preparation grinds sand, fly ash or tailings in ball mills with lime and cement. The double-layer cross-blade mixer blends 250–700 kg/m³ slurry. A lifting pouring outlet avoids splashing mould oil. Spares cover mill liners, blades, valves and shaft seals.
- Inputs: sand, fly ash, tailings, lime, cement
- Double-layer cross-blade pouring mixer
- Lifting pouring device protects oil film
- Spares: mill liners, blades, seals, valves
Automatic Reinforcement Saddle Frame Cycle
Panel lines cycle reinforcement via needle holders, cleaners, wax tanks and drying boxes. Automatic conveyors and cranes dip steel mesh cages for anti-corrosion. Cages wait on inserting cranes for slurry pouring. Spares include needles, chains, hooks and sensors.
- Dedicated to reinforced AAC panel lines
- Needle cleaning, wax dipping & drying box
- Integrated anti-corrosion tank & cranes
- Spares: needle holders, chains, sensors
Demoulding & Grooving Machines
The demoulding machine uses hydraulic lifting, gear-rack synchronization and precision encoders. End-face flange wheels simplify maintenance access. An automatic grooving unit swaps cutters and recycles wet trimmings. Spares include racks, wheels, knives and cylinders.
- Hydraulic lift + gear-rack synchronization
- Precision encoder travel positioning
- Automatic grooving cutter change system
- Spares: cutters, scrapers, racks, wheels
Horizontal & Vertical Cutting System
Green cakes are cut in an upright position before autoclaving to maintain dimensional accuracy and allow direct recycling of wet cutting waste. The cable-stayed horizontal cutter suspends single wires to prevent cracks. Spares include wires, pulleys and guide sliders.
- Upright green cake cutting before curing
- Cable-stayed horizontal wire suspension
- Low-frequency swing vertical cutter frame
- Spares: cutting wires, rollers, sliders
Autoclaving Section & Side Plates
After cutting, green cakes are grouped and cured in single-head or double-head autoclaves at 200 °C and 1.2 MPa for 10 to 12 hours. Integral side plates hold +/-1 mm tolerance and < 1/100 deflection. Spares cover door seals, steam valves, traps and rail rollers.
- Curing: 200 °C, 1.2 MPa, 10–12 h cycle
- Inter-autoclave steam reversal recycling
- Side plates: < 1/100 deflection, +/-1 mm
- Spares: door seals, valves, steam traps
Fully Automatic AAC Packing Section
Automatic packing handles palletized (1.2x0.6 to 1.2x1.2 m) or palletless loads stacked 1.2 to 2.4 m high. A clamping machine with 15 collet pairs and independent ball valves sorts blocks and panels. Servo transfer adjusts clamp force. Spares cover collets, valves and racks.
- 15 pairs of collets with ball valves
- Pallets 1.2x0.6 to 1.2x1.2 m or palletless
- Stacking height: 1.2 / 1.5 / 1.8 / 2.4 m
- Spares: collets, ball valves, racks
Central Integrated Control & Process R&D
The central control system runs over TCP/IP Ethernet with video monitoring, automated status checks and fault alarm diagnostics. KEDA SUREMAKER / Anhui Keda Industrial runs >600 material tests yearly and holds 83 welding qualifications. Spares cover PLCs, sensors and drives.
- Central control protocol: TCP/IP Ethernet
- Video monitoring & fault alarm diagnostics
- >600 raw tests/year & 83 welding quals
- Spares: PLCs, encoders, sensors, drives
AAC Plant Architecture by KEDA SUREMAKER / Anhui Keda Industrial
KEDA SUREMAKER / Anhui Keda Industrial designs complete autoclaved aerated concrete block and reinforced panel plants across 250–700 kg/m³ densities.
Buyers select between vertical cake autoclaving for compact layouts and flat cake autoclaving recommended for reinforced panels with green or white cake separation.
Both plant concepts cut cakes in an upright position before curing, letting wet trimmings from six-sided cutting and grooving drop straight into the waste slurry pit for direct reuse.
Precision Cutting, Mould Rigidity & Steam Recycling
Integral side plates analyzed by finite element method maintain plane load deformation below 1/100 and machining tolerance within +/-1 mm to eliminate slurry leakage.
The cable-stayed horizontal cutter suspends single wires on independent columns to prevent settlement cracks, paired with a low-frequency swing vertical cutter.
Single-head or double-head autoclaves cure grouped cakes at 200 °C and 1.2 MPa for 10 to 12 hours while reversing steam between vessels to reduce plant energy consumption.
Raw Material Testing, Automation & Section Sourcing
The process experimental center conducts more than 600 raw material analyses and formula tests per year for sand, fly ash and tailings, supported by 83 welding qualifications and a TCP/IP Ethernet central control system.
Specify the required plant capacity, section or nameplate data for a tailored SpareX quotation.
KEDA SUREMAKER / Anhui Keda Industrial and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of KEDA SUREMAKER / Anhui Keda Industrial and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Besser Company
- Equipment and parts for Columbia Machine
- Equipment and parts for YCDCF
- Equipment and parts for Runze Fluid
Documents and sources
- KEDA SUREMAKER (Anhui Keda Industrial Co., Ltd.) — official AAC turnkey plant site
- About KEDA SUREMAKER — company profile and national/industry standards
- AAC Production Technology — vertical and flat cake autoclaving concepts
- AAC process overview — siliceous/calcareous materials and properties
- Raw Material Preparation Section — ball mills, double-layer mixer & pouring device
- Automatic Reinforcement Saddle Frame Cycle System — needle, wax & anti-corrosion cycle
- Pre-curing & Cutting System — demoulding, grooving, horizontal & vertical cutters
- Autoclaving Section — 200 C / 1.2 MPa curing and FEA integral side plates
- Fully Automatic AAC Packing Section — 15 collet pairs & servo cake transfer
- Central Integrated Control System — TCP/IP Ethernet & fault diagnostics
- KEDA SUREMAKER Know-how — >600 raw material tests/year & 83 welding qualifications
