Wehrhahn (Wehrhahn GmbH) AAC & Fibre Cement Plants
Turnkey Wehrhahn AAC plants (PLUS 600–1,400 m³/day, SMART/superSMART 200–2,000 m³/day), fibre cement CC/CCA sheet lines (2–20 t/h), lime shaft kilns (50–300 t/day), dry mix mortar plants, and WECOMIX / WACO automation.
Wehrhahn PLUS & EcoPLUS AAC Plants
Wehrhahn PLUS (600–1,400 m³/day) and compact EcoPLUS (500–950 m³/day) AAC lines operate with upright cake autoclaving and zero system waste. A patented cutting bed remover enables vertical steaming, high line capacity, and straightforward packing plant handling.
- PLUS: 600–1,400 m³/day
- EcoPLUS: 500–950 m³/day
- Upright cake autoclaving
- Patented cutting bed remover
Wehrhahn SMART, EcoSMART & superSMART Plants
Modular AAC lines span EcoSMART (200–500 m³/day, 1,800–2,200 m²), upgradable SMART (300–1,250 m³/day), and high-output superSMART (1,100–2,000 m³/day). After vertical cutting, cakes tilt flat for green cake separating before autoclaving to avoid sticking and produce smooth panels.
- EcoSMART: 200–500 m³/day
- SMART: 300–1,250 m³/day
- superSMART: 1,100–2,000 m³/day
- Green cake separating unit
Vertical Cutting Lines & Hinged Moulds
Stationary tilting machines and moulds with four hinged walls feed a long vertical cutting line with nearly doubled thickness cutter length. Electromechanical drives replace 60% of hydraulic parts and eliminate 90% of foundation pits. Side trimmers feature quick-change knives and wire cleaning.
- 4-wall hinged moulds & tilter
- Doubled thickness cutter length
- 60% fewer hydraulic parts
- Quick-change side trimmer knives
WECOMIX Dosing & Mixing Systems
The automated WECOMIX plant weighs and mixes sand or fly ash, cement, lime, anhydrite gypsum, water, and aluminium powder for AAC, as well as fibre cement slurry. Flexible dosing sequences, automatic recipe optimisation, and custom batch reporting keep slurry density uniform.
- Sand, fly ash, lime, cement, Al
- Flexible dosing & auto-tuning
- AAC & fibre cement slurry mixing
- Wear blades, valves & sensors
Autoclaves & WACO Process Control
AAC blocks and CCA fibre cement sheets cure in saturated steam at 180–190 °C under WACO control. WACO adjusts process curves automatically across electric and pneumatic valves with steam recovery. Finished AAC achieves 300–700 kg/m³ dry density and 2–7.5 N/mm² strength.
- Saturated steam 180–190 °C
- AAC dry density 300–700 kg/m³
- Compressive strength 2–7.5 N/mm²
- Thermal value 0.08–0.18 W/mK
Fibre Cement CC & CCA Sheet Plants
Modular plants from 2 to 20 t/h produce air-cured CC (PVA/PAN fibres) and autoclaved CCA (silica sand, cellulose) sheets. A 2 to 6 tub sheeting machine builds layers from sieve cylinders onto a felt and forming roller, followed by stack or single-sheet presses, water-jet cutters, and coaters.
- Plant output 2 to 20 t/h
- 2 to 6 sieve cylinder tubs
- Stack & single sheet presses
- Guillotine, circular & water-jet
Lime Shaft Kilns, Milling & Dry Mix Mortar
Shaft kilns rated at 50, 100, 150, 200, and 300 t/day burn 10–80 mm limestone down to 50% load using 30–50% less energy than rotary kilns. Scope covers lime milling plants, dry mix mortar lines for tile glues and AAC adhesives, and filter presses for gypsum or calcium silicate boards.
- Shaft kilns 50–300 t/day
- 30–50% lower energy vs rotary
- 10–80 mm limestone feed
- Dry mix mortar & filter presses
MCS / WH-EnMS / WH-PCI Automation & Spares
Pre-wired decentralized cabinets cut site installation time by 25% and cable length by up to 6,000 m, paired with MCS, WH-EnMS energy tracking, and WH-PCI SQL/ERP logging. Replacement wear parts cover cutting wires, trimming knives, mould seals, sieve cylinders, felts, valves, and PLC modules.
- Pre-wired cabinets (-25% install)
- WH-EnMS energy & WH-PCI SQL
- Cutting wires, knives & seals
- Sieve cylinders, felts & valves
Turnkey AAC & Fibre Cement Production Plant Architectures
Founded in 1892 in Delmenhorst, Germany, Wehrhahn GmbH engineers turnkey autoclaved aerated concrete (AAC) and fibre cement production plants as well as individual process machines.
The AAC portfolio offers upright-autoclaved PLUS (600–1,400 m³/day) and compact EcoPLUS (500–950 m³/day) plants with a patented cutting bed remover, alongside horizontal-autoclaved EcoSMART (200–500 m³/day, 1,800–2,200 m²), SMART (300–1,250 m³/day), and superSMART (1,100–2,000 m³/day) lines with green cake separating.
Fibre cement sheet plants rated from 2 to 20 t/h cover air-cured CC (cellulose plus PVA/PAN fibres) and autoclaved CCA (cement, ground silica sand, cellulose) boards.
A 2 to 6 tub sieve-cylinder sheeting machine, automatic thickness control, stack or single-sheet presses, and circular, guillotine, or water-jet cutters operate with closed water and cut-off recycling loops.
WECOMIX / WACO / MCS Automation, Lime Shaft Kilns & Dry Mortar
All process zones integrate WECOMIX automated batching and mixing, WACO saturated-steam autoclave control (180–190 °C), WH-EnMS machine-level energy monitoring, and WH-PCI product data logging to SQL, CSV, and ERP systems.
Pre-wired decentralized control cabinets ("machine for the socket") tested before shipment reduce on-site installation time by 25% and eliminate up to 6,000 m of cable.
Wehrhahn also builds energy-efficient shaft lime kilns rated at 50, 100, 150, 200, and 300 t/day (10–80 mm limestone feed, 30–50% lower energy consumption than rotary kilns, 50% turndown capability), lime milling stations, dry mix mortar plants for AAC thin-bed adhesives and tile glues, and filter presses for gypsum fibre and calcium silicate boards.
Wehrhahn and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wehrhahn and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ROLLIX
- Equipment and parts for RICKMEIER
- Equipment and parts for Sheffer
- Equipment and parts for MAKISHINKO
- Equipment and parts for KORLOY
Documents and sources
- Wehrhahn GmbH company profile and history since 1892 (Delmenhorst)
- Wehrhahn official Chinese company profile page
- Wehrhahn AAC production plants — PLUS (700–1,400 m³/day) and SMART (200–2,000 m³/day)
- Wehrhahn corporate brochure — AAC plants, fibre cement, lime kilns and automation
- Wehrhahn AAC brochure — plant engineering and cured block specifications
- Wehrhahn AAC production process — WECOMIX, vertical cutting and autoclaving
- Wehrhahn intelligent controls — WECOMIX, WACO, WH-EnMS, WH-PCI and EPLAN cabinets
- Wehrhahn fibre cement production plants — air-cured CC and autoclaved CCA (2–20 t/h)
- Wehrhahn quicklime shaft kilns (50–300 t/day) and dry mix mortar plants
- Wehrhahn spare parts service for AAC, fibre cement and dry mortar plants
- Wehrhahn technical service, installation, commissioning and remote maintenance
