Teknikum Industrial Hoses, Mill Linings & Polymer Components
Engineering selection and export delivery of Teknikum TITAN and GRANIT ceramic hoses, CHEMO-TEK chemical lines, TRL and Steel Top mill linings, rubber-lined steel pipes, DN1000–DN3600 valves and vibration absorbers.
Slurry & Ceramic Hoses TITAN and GRANIT
Smooth TITAN and corrugated GRANIT CERAMIC Antistatic hoses handle abrasive slurry, quartz sand and lime. Vulcanized ceramic inner linings deliver 3–10x longer service life than standard rubber. Burst pressure starts from 3.2 MPa. Hose assemblies and couplings are replaceable.
- TITAN & GRANIT CERAMIC lines
- Burst pressure >= 3.2 MPa
- Media: slurry, sand, powdered lime
- Replaceable: hose and couplings
Chemical & Fuel Hoses CHEMO-TEK and FUEL-TEK
CHEMO-TEK SD EPDM suction and delivery hoses transfer alkalis, acids and alcohols under EN 12115:2021 and ATEX II/2. FUEL-TEK SD handles gasoline and diesel per TRbF 131/2. Burst rating reaches 6.4 MPa or 64 bar. Complete assemblies and end fittings are replaceable.
- EN 12115:2021 & ATEX II/2
- FUEL-TEK TRbF 131/2 compliant
- Burst pressure >= 6.4 MPa / 64 bar
- Replaceable: hose and end fittings
Food & Steam Hoses FOOD-TEK and STEAM-TEK
FOOD-TEK SD LACTO meets EU 1935/2004 and FDA 21 CFR 177.2600 for oily foodstuffs without odor transfer. STEAM-TEK conforms to EN ISO 6134 for 6 bar steam at +164 °C. Hot water rating reaches 2.0 MPa at +120 °C. Steam couplings EN 14423 and hoses are replaceable.
- FOOD-TEK: EU 1935/2004 & FDA
- STEAM-TEK: 6 bar steam +164 °C
- Hot water: 2.0 MPa at +120 °C
- Replaceable: EN 14423 couplings
PLUS Flanges, Balance Joints & ALER-TEK 2.0
Teknikum PLUS flanges tighten behind a rubber bead for unobstructed central flow without extra seals. Balance LCE, LCR and LCS expansion joints use EPDM, NR or NBR to damp vibration. ALER-TEK 2.0 IP66 monitors wear every 60 minutes. Flanges, joints and sensors are replaceable.
- PLUS flange: seal-free joint
- Balance LCE/LCR/LCS joints
- ALER-TEK 2.0: 60-min interval
- IP66 housing (-40 to +60 °C)
Mill Linings TRL, Steel Top and Polyurethane
Modular TRL rubber, Steel Top and polyurethane liners protect AG/SAG, ball, rod and pebble grinding mills. TRL compounds are formulated in Kerava under REACH and RoHS 2 compliance. Composite steel-top elements extend primary grinding life. Lifters, plates and clamps are replaceable.
- AG/SAG, ball, rod & pebble mills
- TRL compounds (REACH / RoHS 2)
- Rubber, Steel Top & PU options
- Replaceable: lifters & grate plates
Rubber-Lined Pipes, Valves & Vibration Absorbers
Rubber-lined steel pipes, bends, Y/T/X-branches and manifolds feature vulcanized ends for seal-free joints. Valve lining covers DN1000–DN3600 butterfly and check bodies. Molded dampers and PU frames reach 55–95 ShA and 1900 kg. Wear plates and isolators are replaceable.
- Pipes, bends, Y/T/X-branches
- Lined valves DN1000–DN3600
- Elastomer hardness 55–95 ShA
- Replaceable: wear plates & dampers
Selecting Teknikum Hoses, Flanges & Wear Monitoring
Selecting industrial hose assemblies depends on media abrasiveness, chemical compatibility, operating pressure and bend radius. Smooth TITAN CERAMIC and corrugated GRANIT CERAMIC Antistatic hoses handle mining slurry, lime and quartz sand with burst ratings from 3.2 MPa.
CHEMO-TEK SD EPDM meets EN 12115:2021 and ATEX group II category 2, FUEL-TEK SD satisfies TRbF 131/2, FOOD-TEK SD LACTO complies with EU 1935/2004 and FDA, and ALER-TEK 2.0 IP66 checks lining wear every 60 minutes.
Mill Linings, Rubber-Lined Piping & Vibration Control
Teknikum TRL rubber compounds, Steel Top composites and polyurethane liners protect AG/SAG, ball, rod and pebble mills while reducing total liner weight compared with full-steel plates.
Rubber-lined steel pipes, Y/T/X-branches, manifolds with vulcanized ends, DN1000–DN3600 lined valves, Balance LCE/LCR/LCS joints and 55–95 ShA vibration isolators deliver corrosion protection and damping up to 1900 kg per metal-framed unit.
Teknikum and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Teknikum and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for RICKMEIER
- Equipment and parts for Fisher
- Equipment and parts for ROEMHELD
- Equipment and parts for Lutz-Jesco
Documents and sources
- Teknikum — official polymer technology website
- Teknikum Industrial Hoses — product portfolio overview
- Teknikum TITAN CERAMIC Antistatic abrasive hose
- Teknikum GRANIT CERAMIC Antistatic corrugated hose
- Teknikum CHEMO-TEK SD EPDM chemical hose
- Teknikum FUEL-TEK SD petrochemical hose
- Teknikum FOOD-TEK SD LACTO food-grade hose
- Teknikum STEAM-TEK steam and hot-water hose
- Teknikum PLUS flange system
- Teknikum Balance LCE/LCR/LCS rubber expansion joints
- Teknikum ALER-TEK 2.0 Smart Hose wear indicator
- Teknikum grinding mill lining services
- Teknikum Steel Top Mill Linings
- Teknikum TRL rubber mill lining compounds
- Teknikum rubber-lined steel pipes and branches
- Teknikum rubber-lined large valves DN1000–DN3600
- Teknikum industrial vibration absorbers
- Teknikum customized polyurethane products
- Teknikum polymer product development (55–95 ShA)
