Fisher industrial control valves, regulators, and FIELDVUE instruments
Fisher control valves, severe-service trims, MR95 and EZH pressure regulators, 657/667 actuators, and FIELDVUE digital valve controllers configured to process conditions.
Globe, angle, and three-way valves
Fisher globe, angle, segmented ball, eccentric plug, and three-way valves handle gas, steam, water, and chemical media. The Fisher GX system integrates valve and actuator, while 119EZ and 119EZS manage fuel gas burner control. Replaceable plugs, cages, and stem packings maintain shutoff.
- GX, 119EZ, 119EZS series
- Converging & diverging flow
- Cage, port, stem guided
- Gas, steam, water, chemicals
Severe-service and steam valves
Fisher severe-service control valves address cavitating, erosive, flashing, high-pressure-drop, high-temperature, and noisy media. Whisper NXG and Whisper NXV trims reduce noise, while Cavitrol HEX limits cavitation. Fisher and Sempell desuperheaters inject controlled cooling water.
- Whisper NXG and NXV trims
- Cavitrol HEX anti-cavitation
- Fisher & Sempell steam valves
- Hardened cages and seats
Pressure regulators and LPG valves
Fisher pressure regulators include MR95 series, EZH and EZHSO pressure-reducing and slam-shut lines, and steam regulators. For LPG storage and transfer, C471 and C477 jet bleed internal valves provide dependable isolation. Service kits cover diaphragms, springs, and seats.
- MR95, EZH, EZHSO series
- C471 and C477 LPG valves
- Slam-shut & relief units
- Diaphragm and seat kits
FIELDVUE positioners and sensors
FIELDVUE digital valve controllers including DVC7K, DVC6200, DVC6200f, DVC6200p, DVC6200 SIS, DPC2K, and 4400 deliver real-time diagnostics and non-contact feedback. DVC6200 supports replaceable module bases, while pneumatic 3582 units allow zero and span calibration.
- DVC7K, DVC6200, SIS, 4400
- Pneumatic 3582 positioners
- Non-contact stem feedback
- Replaceable module bases
Level, process, and I/P controls
Level control includes float-style 2100E electric switches and displacer-style FIELDVUE L2t, DLC3100, DLC3020f, and DLC3100 SIS controllers. Pneumatic C1 units use Bourdon tubes, bellows, or displacers. Fisher i2P-100 transducers convert 4-20 mA inputs to air output.
- L2t, DLC3100, 2100E level units
- Fisher C1 pneumatic series
- i2P-100 I/P transducers
- Torque tubes and air relays
657/667 and easy-Drive 200R actuators
Fisher 657 and 667 sliding-stem diaphragm actuators (including size 40i) support direct mounting of FIELDVUE DVC6200 controllers and rotary brackets. For electric actuation, easy-Drive 200R replaces pneumatic air loops. ValveLink software runs loop diagnostics.
- 657 & 667 diaphragm actuators
- easy-Drive 200R electric drive
- ValveLink valve diagnostics
- Diaphragms, springs, brackets
Selecting Fisher valves and instrumentation
Specify valve body geometry, severe-service noise or anti-cavitation trim, actuator action, and FIELDVUE or pneumatic instrumentation protocol. Severe gas, steam, or flashing duties require Whisper NXG, Whisper NXV, or Cavitrol HEX trims.
Compact process skids use the Fisher GX valve and actuator assembly or three-way converging and diverging globe bodies, while fuel gas and pressure-reduction lines rely on 119EZ/119EZS valves, MR95, EZH/EZHSO regulators, and C471/C477 LPG internal valves.
Actuator mounting and digital loop diagnostics
Fisher 657 and 667 diaphragm actuators (including size 40i) support direct integral mounting of FIELDVUE DVC6200 and DVC7K controllers or 4400 digital position transmitters, while easy-Drive 200R provides electric actuation where instrument air is unavailable.
Legacy pneumatic loops integrate 3582 positioners, C1 pneumatic controllers, i2P-100 current-to-pressure transducers, and 2100E/L2t/DLC3100 level controllers alongside ValveLink diagnostic software.
Fisher and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Fisher and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for VYC Industrial
- Equipment and parts for Tecnocontrol
- Equipment and parts for UK Flowtechnik
- Equipment and parts for Lutz-Jesco
Documents and sources
- Fisher brand overview and flow control portfolio (Emerson)
- Control valves portfolio: globe, angle, segmented ball, rotary (Emerson)
- Three-way control valves and Fisher GX system (Emerson)
- Severe service control valves and Whisper / Cavitrol trims (Emerson)
- Fisher and Sempell steam conditioning valves and desuperheaters (Emerson)
- Fisher FIELDVUE technology: DVC7K, DVC6200, DPC2K, L2t, DLC3100 (Emerson)
- Valve positioners: DVC6200, DVC7K, 3582 and 657/667 mounting (Emerson)
- Fisher FIELDVUE 4400 digital position transmitter (Emerson)
- Fisher level controllers: 2100E switch and L2t controller (Emerson)
- Fisher pneumatic controllers and C1 series (Emerson)
- Fisher electro-pneumatic I/P transducers and i2P-100 (Emerson)
