Lutz-Jesco Dosing Pumps, Disinfection Systems & Spare Parts
Engineering selection of Lutz-Jesco MAGDOS, MEMDOS, REKOS, and PERIDOS FXM dosing pumps, C 2526 chlorinators, EASYZON H ClO₂ generators, EASYPURE polymer stations, and spare assemblies built to order.
MAGDOS LB, LD, LK, LA, LP Solenoid Diaphragm Pumps
MAGDOS LB, LD, LK, LA, and LP solenoid diaphragm dosing pumps cover 0.36 to 13 l/h at up to 16 bar across seven capacity ranges. PVC, PP, PVDF, or steel heads handle acids and alkalis. Spares include PTFE diaphragms, double ball valves, and bleed units.
- Flow 0.36–13 l/h, pressure up to 16 bar
- Wetted materials: PVC, PP, PVDF, stainless steel
- IP65 housing, 100–240 V, 0/4–20 mA & Ethernet (LP)
- Parts: PTFE diaphragm, double ball valves, dosing head
MEMDOS SMART LPX, LAX, LDX Stepper Diaphragm Pumps
MEMDOS SMART LPX, LAX, and LDX stepper-motor dosing pumps span eight stages from 2.6 to 182 l/h with ±1 % repeatability. A 1000:1 turndown ratio on LPX, 3.5-inch color touchscreen, and Modbus RTU enable accurate chemical feed. Spare kits cover diaphragms, ball valves, and rupture sensors.
- 8 capacity sizes: 2.6–182 l/h, ±1 % repeatability
- 1000:1 turndown (LPX), 3.5-inch color touchscreen
- Modbus RTU, 0/4–20 mA, and pulse control inputs
- Parts: diaphragm, check valves, rupture detector
MEMDOS LB, LA, LP, MR, KMS Motor Diaphragm Pumps
Motor-driven MEMDOS LB, LA, and LP pumps deliver 4 to 1020 l/h up to 16 bar with optional double-diaphragm heads and ATEX ratings. MR/ZMR models reach 990 l/h (980 l/h per head at 10 bar), while modular KMS integrates overflow valves. Service items include diaphragms, DN6–DN32 valves, and drives.
- Flow 4–1020 l/h, up to 16 bar (LB, LA, LP)
- Double-head ZMR: 55–980 l/h per head up to 10 bar
- Double-diaphragm safety, ATEX Zone 1/2, VFD ready
- Parts: diaphragms, DN6–DN32 check valves, motors
REKOS KR and ZKR High-Pressure Piston Dosing Pumps
Single-head REKOS KR and double-head ZKR piston dosing pumps deliver 9 to 420 l/h per head at pressures up to 200 bar. A 1.4571 stainless piston, PTFE packing rings, and linear stroke adjustment minimize backpressure drift. Replaceable parts include pistons, packing sets, and DN8–DN32 valves.
- Flow 9–420 l/h per head, pressure up to 200 bar
- 1.4571 stainless steel piston, PTFE packing rings
- Linear stroke-length dosing, optional electric actuator
- Parts: 1.4571 piston, gland packing, DN8–DN32 valves
PERIDOS FXM 1–3 and EASYDOS Peristaltic Dosing Pumps
PERIDOS FXM 1 (2.8 l/h at 1.5 bar), FXM 2 (176 l/h at 8.6 bar), and FXM 3 (840 l/h at 4.5 bar) dose abrasive and off-gassing fluids with a 5000:1 turndown ratio. EASYDOS Peristaltic V covers 7–9000 ml/h. Tool-free Norprene or Tygothane hoses are the sole wetted wear item.
- FXM 1/2/3: up to 840 l/h (FXM 3) and 8.6 bar (FXM 2)
- 5000:1 turndown, ±1 % repeatability, valveless design
- Ethernet/IP, Modbus TCP, TLD leak and FVS flow sensors
- Parts: Norprene/Tygothane hoses, rollers, TLD sensor
C 2526 Vacuum Chlorinators & EASYCHLORGEN T / TECHNOSTAR
Vacuum chlorinator C 2526 per DIN 19606 doses chlorine gas up to 25 kg/h (200 kg/h in plant systems) with manual or motorized valves. Electrolysis systems EASYCHLORGEN T (250–2000 g/h) and TECHNOSTAR 2000 AT (30–250 g Cl₂/h) produce chlorine from salt. Spares cover cells and regulators.
- C 2526 vacuum chlorinator per DIN 19606 up to 25–200 kg/h
- EASYCHLORGEN T on-site hypochlorite: 250–2000 g/h
- TECHNOSTAR 2000 AT inline electrolysis: 30–250 g Cl₂/h
- Parts: vacuum regulator diaphragms, rotameters, cells
EASYZON H Chlorine Dioxide & EASYPURE Polymer Stations
EASYZON H vacuum generator mixes acid and chlorite for 250–2000 mg/l ClO₂ (5–1400 g/h) with an 8 l tank and Modbus TCP/IP alerts. EASYPURE Powder & Liquid mixes 0.1–0.5 % polymers up to 5000 l/h. Spares include vacuum injectors, flow meters, and feeder seals.
- EASYZON H: 250–2000 mg/l ClO₂, integrated 8 l tank
- Touchscreen HMI, Modbus TCP/IP alarm telemetry
- EASYPURE: 0.1–0.5 % polymer, 5000 l/h (10,000 l/h draw)
- Parts: vacuum injectors, flow meters, agitator seals
EASYPRO Measuring Panels & Custom Dosing Systems
The EASYPRO panel monitors up to eight parameters—pH, ORP, free chlorine, ClO₂, ozone, H₂O₂, turbidity, and conductivity—to control MEMDOS pumps. Custom skids, cabinets, and containers in PVC, PP, PVDF, or steel add leak and pressure sensors. Spares cover electrodes and valves.
- EASYPRO: up to 8 online water quality parameters
- Dosing panels, cabinets, and containerized stations
- Parallel/redundant pump skids in PVC, PP, PVDF, steel
- Parts: pH/ORP/Cl₂ sensors, dampeners, relief valves
Selecting Lutz-Jesco Dosing Pumps by Flow Rate, Pressure, and Drive Type
Solenoid-driven MAGDOS LB, LD, LK, LA, and LP pumps handle continuous dosing from 0.36 to 13 l/h at up to 16 bar.
Where wide turndown (1000:1), ±1 % repeatability, and Modbus RTU connectivity are required, stepper-driven MEMDOS SMART LPX, LAX, and LDX series cover eight capacity stages from 2.6 to 182 l/h with a 3.5-inch color touchscreen.
Higher industrial capacities up to 1020 l/h (up to 16 bar) are served by motor-driven MEMDOS LB, LA, LP, modular KMS, and double-head MR/ZMR pumps.
For high backpressure up to 200 bar, REKOS KR/ZKR piston pumps deliver 9 to 420 l/h per head, while PERIDOS FXM 1–3 peristaltic pumps dose abrasive or gas-forming media up to 840 l/h.
Wetted Materials, Double-Diaphragm Safety, and Automation Interfaces
Dosing heads and double ball valves are configured in PVC, PP, PVDF, or 1.4571 stainless steel paired with PTFE diaphragms and FPM or EPDM elastomers to match acids, alkalis, coagulants, and disinfectants.
For hazardous areas, MEMDOS LB models offer ATEX Zone 1 and 2 motor options alongside optional double-diaphragm rupture monitoring.
Plant integration relies on scalable 0/4–20 mA analog signals, pulse inputs, level alarms, and fieldbus communication including Modbus RTU on MEMDOS SMART LPX, Ethernet/IP and Modbus TCP on PERIDOS FXM 2/3, and optional Ethernet interfaces on MAGDOS LP and MEMDOS LP.
Chlorine Disinfection, Polymer Stations, and Online Water Monitoring
Water and wastewater plants deploy C 2526 DIN 19606 vacuum gas chlorinators (up to 25–200 kg/h), EASYZON H vacuum chlorine dioxide generators (250–2000 mg/l ClO₂ with an 8 l tank), and on-site electrochlorination systems EASYCHLORGEN T (250–2000 g/h) and TECHNOSTAR 2000 AT (30–250 g Cl₂/h).
Three-chamber EASYPURE Powder & Liquid stations prepare 0.1–0.5 % flocculant solutions at up to 5000 l/h, while EASYPRO measuring water panels track up to eight parameters (pH, ORP, free chlorine, ClO₂, ozone, H₂O₂, turbidity, conductivity) to regulate MEMDOS pumps inside custom dosing cabinets or containerized skids.
Lutz-Jesco and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Lutz-Jesco and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Leybold
- Equipment and parts for VYC Industrial
- Equipment and parts for Ultrafilter Belux
- Equipment and parts for UK Flowtechnik
Documents and sources
- Lutz-Jesco — Dosing Pumps Catalog (MAGDOS, MEMDOS, REKOS, EASYDOS)
- Lutz-Jesco — Peristaltic Pumps PERIDOS FXM & EASYDOS
- Lutz-Jesco — Wastewater & Water Treatment Systems (C 2526, EASYPURE, EASYPRO)
- Lutz-Jesco — Custom Dosing Panels, Cabinets & Containerized Systems
- Lutz-Jesco — Official Manufacturer Portal (EASYZON H, EASYCHLORGEN T, TECHNOSTAR)
