RICKMEIER Gear Pumps, Valves & Lubrication Oil Systems
Selection and quotation of RICKMEIER industrial gear pumps (R6, R5, UNI, customised series), pressure control valves, and custom oil circulation systems.
R6 Series Gear Pumps (R36, R46)
The R6 series (R36, R46) delivers displacements from 112 to 230 cm³/rev and flow rates up to 690 l/min at up to 3000 rpm and 25 bar in an EN-GJL-250 housing with standard FKM seals. Frame sizes R46/112–R46/230 remain interchangeable with R5. Modular seal kits and lead-free bushes are supported.
- Flow up to 690 l/min (112–230 cm³/rev)
- Max pressure 25 bar, speed up to 3000 rpm
- EN-GJL-250 housing and FKM seals
- 100% interchangeable with R5 series
R5 Standard Gear Pumps (R25–R105)
The R5 external gear pump series spans R25 to R105 with a modular three-part housing, optional integrated DB relief valve, and ATEX 2014/34/EU builds. Options include oval/round flange covers, axial ports, and double pumps (R95+35). Shaft seals and wear bushes are replaceable.
- Sizes R25, R35, R45, R65, R95, R105
- Three-part housing with DB relief valve
- ATEX 2014/34/EU and double-pump builds
- Rotary shaft seals and wear parts
R5 Pump Units & Magnetic Couplings
All R5 gear pumps (R25–R95) come as complete units with electric motor, bell-housing bracket, and shaft clutch. Standard drives use three-phase asynchronous motors, with single-phase AC or DC options. Variants include integrated magnetic couplings (e.g. R35) and built-in frequency converters.
- Pump units based on R25–R95 series
- 3-phase AC, 1-phase AC, and DC motors
- Integrated magnetic coupling option
- Brackets, clutches, and VFD units
UNI Bi-Rotational Pumps (R4.0–R6.0)
RICKMEIER UNI internal gear pumps (R4.0/35, R4.5/45, R4.5/54, R6.0/160) maintain one flow direction regardless of shaft rotation without switching valves. Displacements run 35 to 160 cm³/rev for flows up to 400 l/min. They serve wind turbines, marine transmissions, and gas generators.
- 35–160 cm³/rev, flow up to 400 l/min
- Constant flow under reverse rotation
- Low pressure loss at high oil viscosity
- Wind, marine gear, and gas generator use
Customised & Built-In Gear Pumps
Customised external and internal gear pumps cover 1 to over 3000 cm³/rev and flows up to 5000 l/min (e.g. R1.5/7.1, R79/520, R109/2360, R129/2665). Designs include built-in cartridge pumps, oil-pan pumps with drive pinions, DIN/SAE interfaces, and integrated relief or pilot-control valves.
- 1 to >3000 cm³/rev, flow up to 5000 l/min
- Cartridge, plug-in, and oil-pan units
- DIN, SAE, and custom interface flanges
- Integrated relief and pilot-control valves
Valves (RSn, DBV40, DB9) & Oil Supply Systems
RICKMEIER pressure relief and control valves (RSn/RSnE DN12–DN50, DBV40 DN40, DB9 DN80, DBV125 up to 5000 l/min) and custom oil supply systems serve gearboxes, turbines, compressors and marine drives. Systems come as tank (WS 400–WS 6000), base-plate (GP), or R25–R65 mounting plate units.
- Valves RSn/RSnE, DBV40, DB9, DBV80, DBV125
- Valve capacities from 40 to 5000 l/min
- Tank WS, base-plate GP & R25–R65 plates
- For drives, turbines, compressors & ships
Selecting R5, R6 & UNI Series for Viscosity and Duty Cycle
RICKMEIER gear pumps serve industrial lubrication circuits, hydraulic working systems, and oil transfer duties.
The R6 series (R36, R46/112–R46/230) delivers up to 690 l/min at 3000 rpm and 25 bar, featuring an EN-GJL-250 housing, FKM seals, lead-free plain bearings, reduced cavitation sensitivity, and 100% interchangeability with R5.
For reversible drives in wind energy plants, marine transmissions, and gas generators, UNI internal gear pumps (35–160 cm³/rev, up to 400 l/min) maintain constant flow direction without switching valves.
Standard R5 (R25–R105) pumps and pump units with three-phase, AC, or DC motors are available in ATEX 2014/34/EU builds.
Pressure Control Valves & Engineered Oil Supply Systems
Pipeline pressure relief and control valves cover direct-acting RSn/RSnE (DN12–DN50, 40–650 l/min) and pilot-controlled DBV40 (DN40, 400 l/min), DB9 (DN80, 1800 l/min), DBV80, and DBV125 (up to 5000 l/min), engineered with sharp control edges for high dirt resistance and optional electrical or pneumatic stage switching.
Complete oil supply systems are built to project specifications as tank (WS 400–WS 6000), base-plate (GP), equipment-carrier, or R25–R65 mounting plate units, combining RICKMEIER pumps, valves, drives, and instrumentation and undergoing bench testing before delivery.
RICKMEIER and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of RICKMEIER and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Lutz-Jesco
- Equipment and parts for RENK
- Equipment and parts for ROEMHELD
- Equipment and parts for WITTENSTEIN
Documents and sources
- RICKMEIER — Gear pump series R6 (R36, R46)
- RICKMEIER — Standard gear pump series R5 (R25–R105)
- RICKMEIER — Pump units series R5 and magnetic couplings
- RICKMEIER — UNI bi-rotational pumps (R4.0–R6.0)
- RICKMEIER — Customised and built-in gear pumps
- RICKMEIER — Pressure relief and control valves (RSn, DBV40, DB9)
- RICKMEIER — Oil supply systems and mounting plate units
- RICKMEIER — Engineering and long-term spare parts support
- RICKMEIER — Official datasheets and brochures (Downloads)
