ROEMHELD workholding and die changing equipment

Source ROEMHELD clamps, hydraulic cylinders, power units and assembly modules for your machine and operating cycle. Equipment and replacement assemblies are matched against an agreed specification.

Swing clamps B1.8350 and B1.8491

Swing clamps clear the loading area before a workpiece is removed. B1.8350 and B1.8491 use a sturdy mechanism and double action. Match the body, swing direction and clamping arm when selecting a replacement.

  • Series B1.8350 / B1.8491
  • Maximum operating pressure 350 bar
  • Flange and cartridge body options
  • Clamping arms and wipers

Work supports B1.9350, B1.910 and B1.911

Hydraulic work supports resist workpiece deflection during machining. B1.9350 offers a metallic wiper edge or PU wipers. B1.910 uses spring return, while B1.911 is double acting.

  • B1.9350: maximum 350 bar
  • B1.910 / B1.911: maximum 500 bar
  • Support plunger and locking unit
  • Contact control on selected versions

Hydraulic cylinders and guided slides

The range includes block, universal, threaded-body and hollow-piston cylinders. Hydraulic slides combine a cylinder with integrated guides. Selection requires matching stroke, mounting, ports and load direction.

  • Block and round housings
  • Threaded-body cylinders
  • Hollow piston for a drawbar
  • Sensors and spherical bearings

Power units, pumps and hydraulic controls

Electric power units and clamping pumps supply workholding circuits. Manual and air-hydraulic drives serve different applications. Valves, couplings and pressure sensors must match the circuit rather than the pump alone.

  • Electric pump units
  • Manual and air-hydraulic pumps
  • Valves and rotary couplings
  • Pressure switches and sensors

Die clamping, changing and transport

Hydraulic, mechanical, electro-mechanical and magnetic systems hold the tool. Roller and ball bars assist die changing. Carrying consoles, changing carts and storage racks must be selected as parts of the complete transfer route.

  • Press bed and ram clamping
  • Roller and ball transport bars
  • Carrying consoles and changing carts
  • Storage racks and push-pull chains

moduhub lifting modules

Basic M4.101, Shop-Floor M4.301, Solid M4.402 and Twin-Strong M4.501 modules adjust assembly station height. Manual-hydraulic and electro-mechanical versions are available. Lifting force and stroke must be checked for the selected series.

  • Basic M4.101 modules
  • Shop-Floor M4.301 modules
  • Solid M4.402 / Twin-Strong M4.501 modules
  • Hydraulic or electric actuation

Selecting a system for the operating cycle

Select a ROEMHELD clamping system against the fixture schematic and operating cycle. Start with the actual task: holding a workpiece during cutting, supporting a thin wall, securing a die or lifting an assembly station. These tasks belong to different product groups.

For a new fixture, identify the workpiece material, locating surfaces, machining directions, loading method and available space.

Clamping force and support load are different quantities. Pump pressure alone does not describe the force at the workpiece: actuator geometry, arm length, losses and opposing loads also matter.

Check the order in which supports and clamps engage, how the part is released and which signals permit machine movement. For a complete equipment package, define actuators, power supply, connections, monitoring and documentation.

Swing clamps and hydraulic work supports

A swing clamp first clears the loading area and then holds the workpiece. B1.8350 and B1.8491 are double-acting series with a maximum operating pressure of 350 bar. Specify the body mounting arrangement, swing direction and arm configuration.

The manufacturer links the permissible pressure for a one-sided arm to its length. A longer arm therefore requires a check of the force diagram even when the hydraulic pressure stays unchanged.

A work support brings a plunger into contact with the workpiece and locks it to resist machining loads. B1.910 uses spring return, whereas B1.911 is double acting. B1.9350 offers different wiper and contact-control configurations.

Confirm the approach function, contact force and required off-position. Contact must not lift the workpiece away from its locating surfaces.

Hydraulic cylinders and guided movement

Block and round housings, threaded bodies and hollow pistons address different installation requirements. A cylinder enquiry should define stroke, mounting surfaces, force direction and hydraulic port positions.

A drawbar arrangement requires a suitable passage through the piston; a hydraulic slide also includes a guiding function. The position of the applied load affects the supporting joints and connections.

The accessory range includes magnetic position sensors, contact bolts and spherical bearings. Check their compatibility with the selected cylinder and connected mechanism. The bill of materials should distinguish new items from components retained in the installation.

Inspection conditions and acceptance requirements should refer to the selected assembly, including its mounting and intended movement.

Power supply and hydraulic control components

ROEMHELD offers electric pump units and manually or air-hydraulically operated clamping pumps. Selection follows the fixture circuit and duty rather than pressure alone. Establish the oil volume required for each cycle, desired movement speed, holding method and available energy supply.

For an existing station, identify the pump designation, valve circuit and connection to the clamping group.

Valves control hydraulic processes, couplings separate and connect lines, and rotary couplings move with rotating assemblies. Pressure switches and pressure sensors perform different control functions. Specify the signal type, connection and role of each device.

For a system package, agree the lines, connecting elements and monitoring points together with the actuators before ordering.

Die clamping and die changing equipment

Hydraulic, mechanical, electro-mechanical and magnetic systems provide different ways to secure dies and moulds. Hydraulic elements can be fixed, integrated into the machine table or moved along press slots.

Selection requires information about the press bed and ram, tool plates and intended clamping arrangement. Magnetic mould clamping and mechanical clamping have different application conditions.

Tool movement creates a separate transfer route. Roller and ball bars, carrying consoles, changing carts, storage racks and push-pull systems must suit the tool mass, centre of gravity, transfer heights and floor space. Check how adjacent sections meet and where the die rests during each step.

A coordinated equipment package considers storage, transfer to the press and final clamping together.

Assembly stations with moduhub lifting modules

moduhub lifting modules adjust the height of an assembly station. Basic M4.101, Shop-Floor M4.301, Solid M4.402 and Twin-Strong M4.501 are different series with their own configurations. Manual-hydraulic and electro-mechanical versions are available.

Define the combined mass of the product and upper fixture, required positions, operator access and base attachment before choosing the module.

Do not combine the highest force of one configuration with the longest stroke of another. For a complete assembly, agree the upper plate, mountings, controls and access for maintenance. A replacement should preserve the intended movement and match the interfaces of the remaining equipment.

The actual scope and acceptance criteria are recorded in the agreed technical specification.

ROEMHELD and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ROEMHELD and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.