VYC Industrial Valves & Boiler Control Equipment (VYC Industrial, S.A.U.)
EN and ASME safety relief valves, pressure reducing valves, steam traps, check valves, bellows stop valves, and boiler level controls engineered by VYC Industrial since 1914.
Full-Lift Spring Safety Valves (AIT)
VYC Industrial Mod. 496 EN and Mod. 495 EN full-lift spring-loaded safety valves provide instantaneous overpressure relief under ISO 4126-1, PED 2014/68/EU, and ATEX 2014/34/EU. Ranges cover 895 cryogenic and 485/486 ASME up to 40 bar. Spares include springs, spindles, and bellows.
- Sizes: DN 20×32 to 200×300
- Set pressure: 0.2 to 40 bar
- Standards: ISO 4126-1, ASME VIII
- Spares: springs, spindles, bellows
Proportional & Vacuum Relief Valves (AP / AN)
VYC Mod. 095, 096, 194–196 EN and ASME 184–186 valves open proportionally to pressure rise in liquid services. Normal-lift Mod. 295, 296, 494, 594 EN and vacuum breaker Mod. 795/785 protect pressurized tanks and vessels. Service spares cover springs, seats, plugs, diaphragms, and caps.
- AP series: 095, 096, 194–196
- AN series: 295, 296, 494, 594
- Vacuum protection: Mod. 795 / 785
- Media: liquids, steam, gases
Pressure Reducing & Mixing Valves
Mod. 714 self-controlled pressure reducing valves hold downstream pressure at 0.5–16 bar across DN15–DN100 and −60 to +215 °C. Direct-action Mod. 513, 514, 614 and Mod. 253 mixers serve steam, gas, and liquid lines. Spares include seats, shafts, bellows discs, and plugs.
- Mod. 714: DN15–DN100, 0.5–16 bar
- Temperature: −60 °C to +215 °C
- Bodies: nodular iron, steel, 1.4408
- Trim parts: seat, shaft, bellows
Steam Traps & Condensate Separators
VYC traps cover thermodynamic Mod. 041–044, bimetallic Mod. 143/144, inverted bucket Mod. 343, float-thermostatic Mod. 241/243/244, and thermostatic Mod. 443–543. Mod. 944 removes condensate and Mod. 003 detects leaks. Spares cover discs, floats, capsules, and screens.
- Thermodynamic: Mod. 041–044
- Float & thermostatic: 241, 243, 244
- Bimetallic & bucket: 143, 144, 343
- Spares: discs, floats, air-vent units
Check Valves, Bellows Stop Valves & Strainers
Wafer check valves Mod. 170/172 (DN15–DN100, 40 bar, −60 to +400 °C) and Mod. 179 fit EN PN6–PN40 and ASME 150/300 flanges. Bellows stop valves Mod. 248 (DN15–DN200), needle Mod. 147, and strainers Mod. 090/191 limit emissions. Spares cover discs, springs, and bellows.
- Mod. 170: DN15–DN100, up to 40 bar
- Mod. 248: DN15–DN200, −40 to +400 °C
- Y-strainers: Mod. 090 and Mod. 191
- Spares: discs, springs, bellows
Boiler Blowdown, Level Controllers & Sight Glasses
Boiler hardware includes sludge blowdown Mod. 460/660/660-A, desalting Mod. 560/560-A with EC-1/EC-2 electrodes, RD-1 controllers, and DRM-1 sample coolers. Level controls Mod. 176/276/290 and gauges Mod. 666/466 meet TRD-602/604. Spares include 006/066 glasses and floats.
- Blowdown: Mod. 460, 660, 660-A
- Desalting: Mod. 560-A, EC-1, DRM-1
- Level & sight: Mod. 276, 666, 365
- Spares: 006/066 glasses, electrodes
VYC Industrial Engineering & Valve Standards
Founded in 1914 in Terrassa (Barcelona, Spain), VYC Industrial, S.A.U. manufactures industrial safety, pressure reducing, check, and bellows-sealed stop valves, steam traps, and boiler level controls.
Products conform to ISO 4126-1, PED 2014/68/EU, ATEX 2014/34/EU, and ASME Section VIII Div. 1, with EN 10204 3.1 material and test reports.
Sizing & Replacement Trim Selection
Equipment and replacement trim requests are matched by valve model (such as Mod. 496, 095, 714, 041, 170, 248, 460), DN/NPS size, EN PN6–PN40 or ASME Class 150–300 flange rating, fluid type, temperature, and set pressure.
Available trim components cover calibrated springs, valve seats, spindles, stainless bellows, thermodynamic discs, float assemblies, and sight glasses.
VYC Industrial and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of VYC Industrial and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ULT AG
- Equipment and parts for ULO GROUP
- Equipment and parts for Ulmer GmbH
- Equipment and parts for Grupo EPELSA
Documents and sources
- VYC Industrial — Valves division overview
- VYC Industrial — Safety & relief valves
- Mod. 496 EN full-lift safety valve catalogue (PDF)
- Mod. 714 pressure reducing valve catalogue (PDF)
- VYC Industrial — Pressure reducing & mixing valves
- VYC Industrial — Steam traps & condensate equipment
- Mod. 170 wafer disc check valve catalogue (PDF)
- VYC Industrial — Check valves & Y-strainers
- Mod. 248 bellows-sealed stop valve catalogue (PDF)
- VYC Industrial — Boiler blowdown & desalting valves
- VYC Industrial — Level indicators & window sight glasses
- VYC Industrial — Spare parts price list area
- VYC Industrial — Official Chinese site
