UK Flowtechnik Industrial Flow Meters, Pumps and Couplings

Flow meters (VSE, Flomec, Elettrotec), Fluidwell computers, process sensors, Beinlich and Rotary Power dosing pumps, DST magnetic couplings, and HBE hydraulic components configured for industrial process duties.

VSE, Flomec and Elettrotec Flow Meters

UK Flowtechnik supplies Flomec OM oval gear and RN axial turbine meters, VSE VS circular gear and RS helical screw meters, and Elettrotec flow switches for oil, water, gas, and viscous chemical dosing. Suitable for adhesives and fuels. Spare rotors and gears are available.

  • Series: Flomec OM/RN, VSE VS/RS
  • Elettrotec, GPI, Lake Monitors, B&R
  • Media: oils, adhesives, gas, fuels
  • Parts: rotors, gear sets, pickups

Fluidwell C, F and F1 Computers and Displays

Fluidwell F1-series monitors (F170, F173, F174, F175), F-series indicators, and C581-ES flow and energy computers measure liquids, gases, and steam. IP66/67 enclosures operate from -40 to +80 °C with 4–20 mA, HART, and Modbus outputs. Spare I/O boards, Flomec RT, and VSE A341 units are available.

  • Series: F170–F175, F010–F133, C581-ES
  • IP66/67 stainless, Al or GRP housings
  • Outputs: 4–20 mA, HART, Modbus
  • Parts: I/O boards, display modules

Density, Pressure, Temperature and Level Sensors

The sensor range includes Bopp & Reuther density meters (ATEX, HART), Hydrotechnik pressure transducers, Pt100 probes, Elettrotec level switches, and DIN-rail signal converters. VSE cal.flow and log.flow boxes aid diagnostics. Sensing cells and plugs are replaceable.

  • Bopp & Reuther density sensors (HART)
  • Hydrotechnik pressure & Pt100 probes
  • Elettrotec level switches, DIN converters
  • Parts: sensing cells, boards, plugs

Beinlich, Vivoil and Rotary Power Dosing Pumps

Beinlich external gear (ZP, ZPD, ZPDA, ZPA, CHEM.pump, ECO.pump, DARTec), internal gear ZPI, radial piston TR/TRGD (to 700 bar), VISCO.pump, Vivoil, and Rotary Power C-series pumps handle 0.8 to 1,000,000 mPa·s fluids up to 350 °C. Spare gear sets, shafts, pistons, and seals are supported.

  • Beinlich ZP/ZPI/TR/DARTec/VISCO.pump
  • Rotary Power C: 2–62 cc/rev, 250 bar
  • Viscosity 0.8–1,000,000 mPa·s, to 350 °C
  • Parts: gear sets, shafts, seals, pistons

DST Permanent Magnetic Couplings and Agitator Drives

DST magnetic couplings transmit 1 to 1,200 Nm standard and up to 25,000 Nm custom torque without dynamic shaft seals. Wetted alloys include 1.4571, Hastelloy C-4/C-276, Titanium Grade 2/5, PTFE, and PFA. Replacement canisters, SSiC bearings, and retrofit kits are supplied.

  • Torque: 1–1,200 Nm (custom to 25,000 Nm)
  • Materials: 1.4571, Hastelloy, Ti, PTFE
  • ATEX designs, >1,000 magnet configs
  • Parts: canisters, SSiC bearings, rotors

HBE Power Transmission Couplings and Hydraulic Components

The hydraulic range covers HBE SOFTEX and STAREX couplings, aluminium and steel tanks (VR, PTHK, RHK, WNK), tank heaters (TI08, TSOK, TV090), oil coolers and heat exchangers (ACI, ACIP, ACM, UKC-G, EKM, DOC), and bellhousings. Spiders, breathers, and gauges are spareable.

  • HBE SOFTEX, STAREX, disc & grid couplings
  • Tanks: VR, PTHK, RHK, WNK (Al / steel)
  • Coolers: ACI, ACIP, UKC-G, EKM, DOC
  • Parts: spiders, breathers, oil gauges

UK Flowtechnik Ltd Engineering Profile

UK Flowtechnik Ltd is a Nottingham-based joint venture between UK Flow Ltd (the UK distribution arm of Germany’s E-Holdings group) and Flowtechnik, formerly the process flow metering division of Hydrotechnik UK Ltd (Company No. 08496328).

Its product portfolio integrates flow meters from VSE, Flomec, Elettrotec, GPI, Lake Monitors, Seametrics, and Bopp & Reuther, Fluidwell displays and computers, Beinlich, Vivoil, and Rotary Power metering pumps, DST magnetic couplings, and HBE hydraulic components.

Application Selection for Flow Metering and Dosing Systems

Equipment selection matches media viscosity (0.8 to 1,000,000 mPa·s on Beinlich gear and progressive cavity pumps), operating pressures up to 250 bar (Rotary Power C) or 700 bar (Beinlich TR/TRGD), and ATEX/IECEx hazardous-area requirements.

Fluidwell C581-ES and F170–F175 controllers in IP66/67 enclosures integrate 4–20 mA, HART, and Modbus outputs, while DST permanent magnetic couplings with 1.4571, Hastelloy, titanium, or PTFE canisters deliver leakage-free torque transmission.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.