Puzzolana Jaw, Cone and Impact Crushers
Puzzolana equipment (India): PJC jaw crushers, PCC and PGC cone crushers, PMVSI and PHSI impact crushers, PGF and PAF feeders, PVS and P-Tech screens, PTJ, PTC and PTS mobile plants. Selection by specification.
PJC Jaw Crushers
PJC jaw crushers handle run-of-mine feed in quarrying, mining and demolition. The swing jaw follows an elliptical motion, and the extended jaw length gives multiple crushing strokes and a higher reduction ratio. They serve stationary plants and mobile crushing units.
- PJC 3624 feed opening: 915×600 mm
- PJC 150128 feed opening: 1,500×1,280 mm
- PJC 4838 motor: 160 kW
- PJC 4432 speed: 250 rpm
PCC H-Type Cone Crushers
PCC H-type cone crushers serve secondary, tertiary and fine crushing and produce 40, 20, 10 and 5 mm sizes. A hydraulic support control system with a floating main shaft lets the operator adjust the setting at once. Tramp iron release and lubrication are automatic.
- PCC 45170 feed opening: 450 mm
- PCC 45170 motor: 315–355 kW
- PCC 11120 fine chamber: 110 mm opening
- PCC 25120 coarse chamber: 250 mm opening
PGC G-Type Cone Crushers
According to the series overview, PGC G-type cone crushers serve primary and secondary crushing and deliver a product up to 100 mm to the next stages. The eccentric and the main shaft run on roller bearings. The site shows models PGC 3392 and PGC 45120.
- PGC 3392 feed opening: 330 mm
- PGC 3392 motor: 132–160 kW
- PGC 45120 feed opening: 450 mm
- G-type product: up to 100 mm
PMVSI Vertical Shaft Impact Crushers
PMVSI vertical shaft impact crushers produce sand and cubical aggregate at the third or fourth stage. The crushing chamber comes in two designs: rock on rock and rock on metal. The site lists models from PMVSI 500 to PMVSI 950 MDR.
- PMVSI 750 MDR feed: 25–40 mm
- PMVSI 750 MDR power: 160–220 kW
- PMVSI 750 MDR rotor ports: 3 or 4
- PMVSI 600 feed: 20–25 mm
PHSI Horizontal Shaft Impact Crushers
PHSI horizontal shaft impactors handle primary and secondary crushing in a single stage on limestone, coal, basalt and granite. Material breaks by free impact of the blow bars. Blow bars can be quickly reversed or replaced, and the rotor is balanced to minimize vibration.
- PHSI 12/12 rotor: 1,200×1,200 mm
- PHSI 12/12 power: 132–200 kW
- PHSI 22/22 rotor: 2,200×2,200 mm
- PHSI 08/09 rotor: diameter 800, width 900 mm
PGF and PAF Feeders
PGF grizzly feeders deliver a continuous feed to the primary crusher and remove undersize, deleterious material and mud. PAF apron feeders draw material from dump hoppers: overlapping steel pans run on tractor chains, with electric, mechanical or hydraulic drive.
- PGF 1142 grizzly: 1,100×4,200 mm
- PGF 1142 drive: 2×4.3 kW
- PAF 16 pan width: 1,600 mm
- PAF24 power: 30–160 kW
PVS and P-Tech Screens
PVS vibrating screens handle sizing, scalping and washing; the frame uses huck bolted assembly, and PVS 1845 comes with 2, 3 or 4 decks. P-Tech screens separate ultra fines from manufactured sand by a dry process, screening up to 150 microns.
- PVS 1845 screen width: 1,820 mm
- PVS 1845 motor: 15 kW (2 decks), 22 kW (3–4)
- P-Tech PTS 2163 area: 13.28 m²
- P-Tech PTS 2163 incline: 15° or 18°
PTJ, PTC and PTS Mobile Plants
The site shows PTJ jaw, PTC cone, PTV and PTI impact crawler units and PTS and PTSG screens. PTJ 1170 and PTC 1125 have a diesel electric power unit and can be switched to grid power where it is available. PTC 1125 has a metal detector in the feeding unit.
- PTJ 1170 jaw: 1,100×700 mm, 110 kW
- PTC 1125 setting: 22–38 mm
- PTC 1125 motor: 200 kW at 1,500 rpm
- PTS 1860-4D screen: 6,100×1,800 mm
Selecting Puzzolana Equipment by Task
For primary crushing of run-of-mine rock there are PJC jaw crushers, with feed openings from 915×600 mm on PJC 3624 to 1,500×1,280 mm on PJC 150128, PHSI impact crushers for limestone, coal, basalt and granite, or PGC G-type cone crushers, described in their series overview for primary and secondary duty.
PGF grizzly feeders and PAF apron feeders deliver feed to the crusher.
Secondary, tertiary and fine crushing is handled by PCC H-type cone crushers, and sand and cubical aggregate at the third or fourth stage by PMVSI vertical shaft impactors. PVS vibrating screens separate the product, while P-Tech screens remove ultra fines from manufactured sand by a dry process.
Mobile and Semi-Mobile Plants
PTJ jaw and PTC cone crawler units run on a diesel electric power unit, 200 kVA on PTJ 1170 and 320 kVA on PTC 1125, and can be switched to grid power where it is available.
The PTJ 1170 carries a 1,100×700 mm jaw crusher with a 110 kW motor, the PTC 1125 a 26110 cone crusher with a 260 mm feed opening and a 22–38 mm setting. The PTS 1860-4D screen has a 6,100×1,800 mm box with a 22 kW electric motor, a 125 kVA diesel hydraulic power unit and feed up to 150 mm.
According to the company timeline, trolley mounted semi-mobile wheeled plants appeared in 1998–2001. Speed Bharath PSBJ serves primary crushing and is positioned by hydraulic jacks; PSBJ4432 carries a PJC-4432 jaw crusher of 1,115×815 mm with a 110 kW motor and feed up to 650 mm.
Puzzolana Machinery Fabricators Company
Puzzolana Machinery Fabricators was founded in 1964, and in 1980–1992 it moved its manufacturing base to Hyderabad, India. The website is signed by Puzzolana Machinery Fabricators LLP, and Puzzolana describes itself as a diversified group based in Hyderabad.
According to the company timeline, in 1992–1998 it engineered and manufactured a cone crusher of its own design. Today the site shows jaw, cone and impact crushers, feeders, screens, classifiers, and mobile and semi-mobile plants.
Puzzolana and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Puzzolana and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Minyu
- Equipment and parts for Pilot Crushtec
- Equipment and parts for McLanahan
- Equipment and parts for Fraste
Documents and sources
- About us — group based in Hyderabad
- Our journey — company milestones
- PJC jaw crushers — series overview
- PJC 3624 jaw crusher — specifications
- PJC 150128 jaw crusher — specifications
- PJC 4838 jaw crusher — specifications
- PJC 4432 jaw crusher — specifications
- H-type cone crushers — series overview
- PCC 11120–25120 cone crushers — specifications
- PCC 45170 cone crusher — specifications
- G-type cone crushers — series overview
- PGC 3392 cone crusher — specifications
- PGC 45120 cone crusher — specifications
- PMVSI vertical shaft impact crushers — series overview
- PMVSI 750 MDR crusher — specifications
- PHSI impact crushers — series overview
- PHSI 12/12 impact crusher — specifications
- PGF grizzly feeders — series overview
- PGF 1142 grizzly feeder — specifications
- PAF apron feeders — series overview
- PAF 16 apron feeder — specifications
- PAF24 apron feeder — specifications
- PVS 1845 vibrating screen — specifications
- P-Tech screens — series overview
- P-Tech PTS 2163 screen — specifications
- Mobile crushers — overview
- PTJ 1170 mobile jaw plant — specifications
- PTC 1125 mobile cone plant — specifications
- PTS 1860 mobile screen — specifications
- Speed Bharath PSBJ semi-mobile plant — specifications
- Manufacturer article — jaw crusher wear parts
- Manufacturer article — cone and VSI crusher parts
- Manufacturer article — screening plant maintenance
