Minyu Cone, Jaw and Impact Crushers

Minyu Machinery equipment (Taiwan): MSP, HN and MCC cone crushers, MS and MSH jaw crushers, MIC and MIV800 impact crushers, MOP and MLH screens, MVG and MVGH grizzly feeders. Selection by specification.

MSP Series Cone Crushers

MSP is the flagship Minyu cone crusher series: MSP100, MSP200, MSP300 and MSP400. Setting adjustment is hydraulic; hydraulic chamber clearing is standard. An external lube unit with tank and filter stops the crusher at high oil temperature or low oil flow; a heat exchanger is optional.

  • MSP400 (C) feed opening: 290 mm
  • MSP100 (C) feed opening: 135 mm
  • MSP300 motor: 180–225 kW
  • MSP400 weight: 28,400 kg

HN Series Cone Crushers

HN covers Minyu cone crushers from 1000HN to 1680HN with hydraulic adjustment and lifting for maintenance. Mantle and concave are high manganese steel; the countershaft drives through a bevel gear and pinion. Each size comes as MCC, MCF, MCS or MCSS, from coarse to ultra-fine crushing.

  • MCC1680HN feed opening: 267 mm
  • MCC1000HN speed: 630 rpm
  • MCC1680HN motor: 250–300 kW
  • MCC1680HN weight: 44,300 kg

MCC Standard Cone Crushers

MCC standard cone crushers, from MCC600 to MCC1680, serve secondary and tertiary crushing in stationary and portable plants. A spring-loaded release system lets uncrushable material pass, the lubrication unit is interlocked with the main motor, and a rib liner protects the lower frame.

  • MCC600 feed opening: 95 mm
  • MCC600 motor: 37–45 kW
  • MCC1500 speed: 560 rpm
  • MCC1500 weight: 37,750 kg

MS and MSH Jaw Crushers

MS jaw crushers, with a larger feed opening and longer pitman arm, serve primary crushing of limestone, tough ores and concrete. A toggle plate guards against tramp material; lubrication is by oil bath. MSH swaps the tension rod and spring for a hydraulic cylinder; two cylinders set the gap.

  • MS2416 feed opening: 600×400 mm
  • MS6048 feed opening: 1,500×1,200 mm
  • MS6048 speed: 190 rpm
  • MSH5434 feed opening: 1,300×850 mm

MIC Horizontal Shaft Impact Crushers

MIC are Minyu horizontal shaft impact crushers with three to four rows of blow bars, a rotor with an anti-skid device, a chrome moly shaft, two adjustable curtains and hydraulic hood opening. Rotor diameter is 1,020 mm on MIC102 models and 1,330 mm on MIC133 models.

  • MIC133184 rotor width: 1,848 mm
  • MIC133152 feed opening: 1,540×1,065 mm
  • MIC133184 motor: 185–220 kW
  • MIC133184 weight: 22,000 kg

MIV800 Vertical Shaft Impactor

MIV800 is a vertical shaft impactor: the rotor throws material onto impeller shoes or anvils, giving rock-on-rock or rock-on-iron crushing. The rotor is closed or open to order, a hydraulic system lifts the upper lid, and an oil station with a pump lubricates the main shaft bearings.

  • MIV800 feed: up to 50 mm
  • MIV800 rotor diameter: 800 mm
  • MIV800 rotor speed: 1,200–1,800 rpm
  • MIV800 motor: 200 kW

MOP and MLH Vibrating Screens

MOP are inclined screens for coarse stone and minerals, set at 15° (20° on MOP2160); an unbalanced eccentric shaft gives a circle motion, and counterweights change the stroke. MLH are horizontal screens with linear motion from two shafts for small sizes, and also dewater damp material.

  • MOP1848D speed: 850 rpm
  • MLH1230D speed: 950 rpm
  • MLH2460XD screen: 2,400×6,000 mm
  • MOP1230F: four decks

MVG and MVGH Vibrating Grizzly Feeders

Minyu grizzly feeders meter feed to the crusher and bypass fines around it. MVG serves stationary primary crushing plants: two counter-rotating shafts give a linear motion at 45°, and the grizzly bars carry a wear-resistant weld overlay. MVGH is lower and longer, for portable plants.

  • MVGH1560 lump size: up to 1,000 mm
  • MVG1542 speed: 600–950 rpm
  • MVGH1560 speed: 600–850 rpm
  • MVGH1560 motor: 37–50 kW

Selecting Minyu Equipment by Task

For primary crushing of large lumps of limestone, river stone, tough ores and concrete there are MS jaw crushers, with feed openings from 600×400 mm on MS2416 to 1,500×1,200 mm on MS6048, or MSH with hydraulic gap adjustment.

Grizzly feeders regulate the feed to the crusher: MVG in stationary plants, MVGH in portable plants.

Secondary and tertiary crushing is handled by MSP, HN or MCC cone crushers, medium and fine crushing by the MIV800 vertical shaft impactor, and there are also MIC horizontal shaft impact crushers. Screens separate the product: inclined MOP for coarse crushed stone, horizontal MLH for small sizes.

Cone Crushers: Liner Types

Minyu cone crushers differ by liner type. HN and MCC come in four types: MCC coarse, MCF medium, MCS short head and MCSS ultra-fine, all for secondary or tertiary crushing; size 600 has only MCC and MCF. MSP types are marked by letters: (C) coarse liner, (M) fine liner, (F) short head liner.

The liner type sets the feed opening and the minimum setting: MCC1680HN has a 267 mm feed opening, MSP200 (F) a 70 mm opening with a setting from 13 mm.

Check weight against the exact model: in size 1000 the HN version is heavier than the standard one, 11,800 kg for MCC1000HN against 10,800 kg for MCC1000.

Minyu Machinery Company

Minyu Machinery Corporation was founded in Taiwan in 1965 and incorporated on January 11, 1966. In 1973 the plant moved to Yang-mei in Taoyuan County, and in 2000 Minyu Machinery (Shanghai) Co., Ltd. was established.

In 2012 Minyu USA opened an office and distribution center in Los Angeles, and in 2020 Minyu USA merged with Spaulding Equipment Company. Headquarters and the parts depot are now in Perris, California, with the Asia branch in Taipei.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.