Pilot Crushtec Twister VSI Crushers and Tracked Plants

Pilot Crushtec equipment: Twister VS100, VS200 and VS350 VSI crushers, TwisterTrac VS350, DoppiaTrac DR400, DynamiTrac HRC8, J100S and XS200 tracked units, and Pilot Modular plants. Selection by specification.

Twister VS100 and VS200 VSI Crushers

Twister VS100 and VS200 are static rock-on-rock VSI crushers for manufactured sand, cubical aggregate, and glass and building waste recycling. VS100 runs an MR06 rotor of 600 mm diameter; VS200 takes an MR07 (700 mm) or MR08 (800 mm) rotor.

  • VS100 MR06 rotor: 1,880–2,480 rpm
  • VS200 MR07 rotor: 1,850–2,345 rpm
  • VS200 MR08 rotor: 1,200–1,800 rpm
  • VS200 with MR08: 30–120 tph

Twister VS350 VSI Crusher

Twister VS350 is a high-tonnage static VSI crusher: the rotor accelerates stone to 80 m/s into a chamber lined with the material itself. Rotors are MR10 with three ports (1,000 mm) or SP09 with six ports (900 mm). HALLS hydraulics open the lid; a jib crane for rotor change is standard.

  • VS350 rotor speed: 1,200–1,680 rpm
  • SP09 rotor throughput: 50–280 tph
  • With rotor bypass: up to 400 tph
  • VS350 electric motor: 160–335 kW

TwisterTrac VS350 Tracked VSI Crusher

TwisterTrac VS350 is a self-propelled tracked VSI crusher for tertiary and quaternary crushing: feeding, crushing and discharge in one machine. VS350E has a diesel-electric drive, VS350H a diesel-hydraulic drive. The 1.2 m wide discharge belt lifts product to 3.7 m.

  • TwisterTrac crusher motor: up to 330 kW
  • TwisterTrac generator: 600 kVA
  • TwisterTrac feed hopper: about 6 m³
  • TwisterTrac VS350 weight: 36,000 kg

DoppiaTrac DR400 Double Roll Crusher

DoppiaTrac DR400 is a tracked double roll crusher for medium to hard bituminous coal, built around the in-house 3636 double drum roll crusher. Rolls have dual hydraulic drive and replaceable segments, and a spring back drum releases tramp material. Compression in the roll gap keeps fines low.

  • DR400 engine: Volvo TAD542VE, 160 kW
  • DR400 roll crusher: model 3636
  • DR400 discharge belt: 1,200 mm
  • DR400 weight: 24,000 kg

DynamiTrac HRC8 Tracked HPGR

DynamiTrac HRC8 is a Pilot Crushtec tracked machine carrying the Metso HRC 8 high pressure grinding rolls for regrinding hard rock and ores and for sand production. The variable speed belt feeder is controlled by the Metso IC80C system. It runs from its own diesel generator or from grid power.

  • HRC8 genset: Volvo TAD851GE, 250 kW
  • HRC8 feed hopper: 3.6 m³
  • HRC8 discharge height: 3,400 mm
  • HRC8 feed control: IC80C system

DynamiTrac J100S Jaw Crusher and XS200 Scalper

DynamiTrac J100S is a compact tracked jaw crusher with a hanging screen and an overband magnet; it crushes rock, concrete and brick up to 400 mm. DynamiTrac XS200 is a tracked two-deck scalping screen with a 13 mm throw that removes oversize before crushing.

  • J100S jaw: 700×500 mm
  • J100S output: 40–100 tph
  • XS200 screen speed: 750 or 950 rpm
  • XS200 feed: up to 300 mm, 200 tph

IC50, MRC3636 and MRC3648 Crushing Modules

Pilot Modular units stand on a skid frame and need no foundations. IC50 is a horizontal shaft impact crusher with reversible hammers for primary and secondary crushing. MRC3636 and MRC3648 are double roll modules for bituminous coal giving −50 mm and −150 mm product.

  • IC50 rotor speeds: 682, 815, 966 rpm
  • IC50 capacity: up to 50 tph
  • MRC3648 rolls: 560×1220 mm, 184 rpm
  • MRC3636 rolls: 660×914 mm, 254 rpm

MAXIscalp 600 and DD7215 Screens, MAF112 Feeder

MAXIscalp 600 is a modular scalping screen with an apron feeder and conveyors that removes oversize ahead of the primary crusher. DD7215 is a dual double-deck screen with two independent 3,650×1,520 mm boxes and a 15–30° incline. MAF112 is an apron feeder with about 7 m³ surge capacity.

  • MAXIscalp 600 top deck: 4,800×1,500 mm
  • MAXIscalp 600 speed: 900 rpm
  • DD7215 speed: up to 1,150 rpm
  • MAF112 feeder: up to 800 tph

Selecting Pilot Crushtec Equipment by Task

For manufactured sand and cubical aggregate there are Twister VSI crushers: VS100 and VS200 for flows up to 55 and 120 tph, VS350 up to 400 tph with rotor bypass, and the tracked TwisterTrac VS350 where no static line is available.

For coal there is the tracked DoppiaTrac DR400 roll crusher and the MRC3636 and MRC3648 modules with −50 and −150 mm product.

For regrinding hard ores and sand production there is DynamiTrac HRC8 with the Metso HRC 8 high pressure grinding rolls. For primary crushing of rock and concrete there is DynamiTrac J100S or the IC50 module, and XS200 and MAXIscalp 600 screens remove oversize.

Pilot Modular units are not bolted down: they need a level compacted pad.

SMP Modular Sand Plants

SMP100, SMP200 and SMP300 plants are built from standard modules: belt feed hopper, screen, conveyors and a Twister crusher. SMP300 uses the BFH1000 hopper, the DD7215 dual screen and the Twister VS350 crusher; feed is 5–60 mm, up to 280 tph passes through the rotor, and the product is −5 mm sand.

The double-deck screen separates material above 35 mm and 0–5 mm sand, while the 5–35 mm fraction goes to the Twister crusher and returns to the screen. Sand grading is changed by swapping screen mesh, without rebuilding the line.

Pilot Crushtec Company

Pilot Crushtec was founded in South Africa in 1990 by Sandro Scherf and his father. Its equipment is designed and manufactured at its own 12,000 m² facility in Jet Park, Gauteng. Tracked TwisterTrac units have been built since 2004, replacing the earlier Tornado machines.

Today more than 110 tracked TwisterTrac units and more than 700 static VSI crushers are in operation. Besides its own range, the company imports Metso, Jonsson, Edge Innovate and Tower Light equipment; this page covers only equipment sold under the Pilot Crushtec name.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.