Fraste Drilling Rigs
Fraste drilling rigs (Italy): Multidrill for soil investigation, water and geothermal wells, FS for water wells, MX for mineral exploration, MITO and FP 30 for foundations, rod loaders and SR service rigs.
Compact Multidrill SL and PL A Rigs
The Multidrill SL, 780 mm wide and 2.5 t in weight, serves soil investigation, environmental monitoring and small water wells. The Multidrill PL A is a low rig for confined spaces and work inside buildings: its mast on a slewing ring drills at up to 45° to the right and left.
- SL: pull-up 2500 daN
- SL: rotary head up to 900 rpm
- PL A: rotary head torque up to 740 daNm
- PL A: mast angle up to 45°
Multidrill ML and GT 120 Rigs
The Multidrill ML serves soil investigation, monitoring and water wells: rotary drilling with fluid or air circulation, DTH hammer and wire-line coring. The Multidrill GT 120 is built for small sites, artesian and geothermal wells, with an on-board automatic drill pipe loader.
- ML: pull-up 6000 daN
- ML: rotary head up to 1100 rpm
- GT 120: rotary head stroke 4100 mm
- GT 120: rotary head torque up to 1200 daNm
Multidrill XL 140 and XL 170 DR Rigs
The Multidrill XL 140 drills for soil investigation and water wells with direct or reverse fluid circulation or a DTH hammer. The Multidrill XL 170 DR is designed for air drilling: its dual rotary head drives the drill pipe and the outer pipe at the same time.
- XL 140: pull-up 10,000 daN
- XL 140: rotary head torque up to 1800 daNm
- XL 170 DR: outer pipe head up to 2700 daNm
- XL 170 DR: drill pipe head up to 1550 daNm
GT ROBOT 275 Geothermal Rig
The Multidrill GT ROBOT 275 is a double rotary rig handling 3 m drill pipes and outer pipes together. It carries two on-board racks of 198 m each and is operated by radio remote control without a physical control panel. Autonomous recovery of rods and pipes is an option.
- Rod rack: 66 × Ø89×3000 mm
- Pipe rack: 66 × Ø152×3000 mm
- Pull-up 18,000 daN
- Rotary head stroke 8000 mm
FS Water Well Rigs
The FS 300 drills with direct or reverse fluid circulation, air with a DTH hammer and augers, and mounts on a truck, track or trailer. The FS 600 is designed for deep water wells, its loader handles 9 m drill pipes. The FS 500 T mounts on a truck or semitrailer.
- FS 300: rated depth 400 m
- FS 600: rated depth 1200 m
- FS 600: pull-up 60,000 daN
- FS 500 T: rated depth 900 m
MX 140 and MX 400 Exploration Rigs
MX rigs can be prepared for diamond coring, reverse circulation and air core drilling, from vertical to 45° angle drilling. Any MX model can be fitted with the Manipulator automatic rod handler and an automatic core barrel handler.
- MX 140: rated W.L. HQ depth 625 m
- MX 400: rated W.L. HQ depth 1750 m
- MX 400: pull-up 28,000 daN
- MX 140: pull-up 10,000 daN
MITO and FP 30 Foundation Rigs
MITO rigs drill micropiles, jet grouting and anchors. The MITO 4 CS with a remote power pack works inside buildings, the MITO 15 handles rods up to 6 m long. The FP 30 is a large diameter pile rig with an operating weight of about 35 t.
- MITO 4 CS: rotary head up to 1220 rpm
- MITO 35: pull-up 19,600 daN
- FP 30: drilling diameter up to 1500 mm
- FP 30: drilling depth up to 48 m
Pipe Loaders, Mud System and SR Rigs
The trailer-mounted FRP feeds drill rods and outer pipes up to 6 m long to the rig and holds up to 30 rods. The FRH is a hydraulic pipe clamp for excavators. The SR 14 is a water well service rig with a telescopic mast and a winch for lifting pipes and the submersible pump.
- FRP: clamp Ø114–406 mm
- FRH: clamping range Ø76–324 mm
- MRU 2500 H mud system: 2500 l/min
- SR 14: hook clearance 12.5 m
Selecting a Fraste Drilling Rig by Task
For soil investigation the site shows the compact Multidrill SL, 780 mm wide, the PL A and the ML; the SL and ML also serve environmental monitoring and water wells, the SL only small ones.
Water wells are also drilled by the Multidrill XL and FS rigs: the rated drilling depth of the FS 600 is 1200 m. The geothermal section shows the Multidrill GT 120 and the double rotary XL 170 DR and GT ROBOT 275.
Mineral exploration is handled by the MX rigs: diamond coring, reverse circulation and air core, with a rated W.L. HQ depth of 1750 m on the MX 400. MITO rigs drill micropiles, anchors and jet grouting, the MITO 4 CS with a remote power pack works inside buildings.
The FP 30 drills piles up to 1500 mm in diameter and up to 48 m deep.
Rod Handling and Accessories
Automatic rod handling differs by model: the Multidrill GT 120 has an on-board loader, any MX rig can be fitted with the Manipulator, the GT ROBOT 275 carries two racks, one for 66 rods and one for 66 outer pipes, all 3000 mm long, and the carousel of the MITO 35 TB version holds up to 9 drill pipes and 9 outer pipes.
Separate products are the trailer-mounted FRP loader for rods and outer pipes up to 6 m long, the FRH 2 and FRH 3 clamps for excavators of at least 5–6 t and 8–10 t class respectively, the MRU 2500 H mud system and the SR 14 service rig for lifting pipes and the submersible pump of a water well.
Fraste Company
FRASTE S.p.A. was founded in 1964, is located in Nogara (Verona, Italy) and manufactures hydraulic drilling rigs. Its first factory in Nogara was built in 1967, the second production facility in 2008.
In 1985 the company launched small soil investigation rigs that evolved into the Multidrill line. In 1992 came the first Manipulator automatic drill pipe loading system, in 2004 the Mito foundation rig series.
Fraste and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Fraste and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Wassara
- Equipment and parts for Ditch Witch
- Equipment and parts for Tesmec
- Equipment and parts for Huddig
Documents and sources
- Company — Nogara, drilling rig production
- Company history — plants and product lines
- Contacts — FRASTE S.p.A. address
- Water well rigs — model range
- Geotechnical rigs — model range
- Geothermal rigs — model range
- MX exploration rigs — model range
- MITO micropile rigs — model range
- Piling rigs — applications
- SR service rigs — model range
- Accessories — loaders and clamps
- Multidrill SL — specifications
- Multidrill PL A — specifications
- Multidrill ML — specifications
- Multidrill GT 120 — specifications
- Multidrill XL 140 — specifications
- Multidrill XL 170 DR — specifications
- GT ROBOT 275 — specifications
- FS 300 — specifications
- FS 600 — specifications
- FS 500 T — specifications
- MX 140 — specifications
- MX 400 — specifications
- MITO 4 CS — specifications
- MITO 15 — specifications
- MITO 35 — specifications
- FP 30 — specifications
- FRP loader — specifications
- FRH clamp — specifications
- MRU 2500 H mud system — specifications
- SR 14 service rig — specifications
