Milestone microwave sample preparation and mercury analyzers

Technical selection of Milestone equipment: ETHOS, ultraWAVE and ultraCLAVE microwave digestion systems, DMA-80 evo and DMA-1 evo mercury analyzers, the ETHOS M muffle furnace and clean chemistry tools.

ETHOS microwave digestion system

ETHOS is a rotor-based microwave digestion system; with accessories it also runs solvent extraction, evaporation and high-temperature processes. The housing is stainless steel and the door stays locked until a user-set temperature. The easyTEMP sensor tracks temperature.

  • Easy, Up and Plus terminals
  • Plus display 10.1 in
  • SafeVIEW camera on Up and Plus
  • easyTEMP contactless sensor

ETHOS LEAN compact labstation

ETHOS LEAN, now in its second series, is a compact labstation for digestion and solvent extraction. Rotors shown include MAXI-14 with 14 positions and large-volume PTFE vessels, SK-6 with six vessels for reactive samples, and MAXI-14 HP for higher temperatures and pressures.

  • MAXI-14 rotor: 14 positions
  • SK-6 rotor: 6 vessels
  • MAXI-14 HP: 14 positions
  • ultraFAST option: up to 1200 °C

ultraWAVE single reaction chamber systems

In the ultraWAVE 2 eco and ultraWAVE 3 all samples digest together in one PTFE-lined stainless-steel chamber pre-pressurized with inert gas. The 2 eco uses an internal thermocouple and air cooling; the ultraWAVE 3 has a contactless temperature sensor and a water-cooling circuit.

  • One SRC chamber for all samples
  • ultraWAVE 3: racks up to 40 vials
  • 2 eco: PTFE, quartz, glass vials
  • 2 eco: air cooling

ultraCLAVE automated digestion system

ultraCLAVE digests up to 77 samples in one SRC reactor at up to 300 °C and up to 200 bar. The stainless-steel reactor exceeds 4 L and holds a 3.5 L PTFE vessel. The system closes the reactor and loads nitrogen pressure on its own; an external chiller cools the vials.

  • Temperature up to 300 °C
  • Pressure up to 200 bar
  • Racks up to 77 positions
  • PTFE vessel 3.5 L

DMA-80 evo mercury analyzer

The DMA-80 evo measures mercury directly in solid, liquid and gas samples with no sample preparation. Mercury is trapped on a gold amalgamator and released into multiple measuring cells; cuvettes are held at 120 °C against condensation. The carrier is compressed air or oxygen.

  • Solid, liquid and gas samples
  • Cuvettes at 120 °C
  • 40-position plates
  • Carrier: air or oxygen

DMA-1 evo compact mercury analyzer

The DMA-1 evo is a compact standalone mercury analyzer with an integrated terminal for labs with limited mercury throughput. Solid and liquid samples are weighed into metal or quartz boats. The easyCONTROL software supports Auto-blank, LIMS connection and data import and export.

  • Metal or quartz boats
  • Solid and liquid samples
  • Integrated terminal
  • LIMS connection

ETHOS M microwave muffle furnace

ETHOS M replaced the former PYRO system and handles ashing, sulfated ashing, loss on ignition, residue on ignition and fusion. Two magnetrons heat a silicon carbide element in the muffle; a Venturi exhaust supplies air. The muffle comes in three interchangeable configurations.

  • Up to 18 crucibles
  • Two magnetrons
  • Three muffle configurations
  • Venturi exhaust

Clean chemistry and dosing

subCLEAN purifies HF, HNO3 and HCl by sub-boiling distillation with fluoropolymer wetted parts, air-cooled. duoPUR has two quartz units with infrared heating, typically 20 °C below boiling. traceCLEAN steam-cleans labware in about an hour; easyFILL doses up to six reagents.

  • duoPUR: 2 quartz units
  • 20 °C below boiling point
  • traceCLEAN cycle about 1 hour
  • easyFILL: up to 6 reagents

Choosing a Milestone sample preparation system

Milestone was established in 1988; Milestone SpA is headquartered in Sorisole (Bergamo, Italy) with offices in the United States, China, Japan and Korea, and its R&D and manufacturing sites are in Germany (MLS) and Switzerland (MWS).

The maker site shows, among others, the ETHOS and ETHOS LEAN rotor-based microwave digestion systems, the ultraWAVE 2 eco, ultraWAVE 3 and ultraCLAVE single reaction chamber systems, the DMA-80 evo and DMA-1 evo mercury analyzers, the ETHOS M muffle furnace and clean chemistry tools.

Rotor-based system or SRC chamber

In the rotor-based ETHOS and ETHOS LEAN each sample is digested in its own PTFE-TFM vessel inside a protective shield.

The rotor is chosen by vessel count and volume; ETHOS rotors shown by the maker include the SK-15 (up to 15 vessels of 100 mL) and the MAXI-44 (up to 44 vessels of 100 mL), and ETHOS LEAN rotors include the MAXI-14, SK-6 and MAXI-14 HP.

In SRC systems all vials sit in one chamber under shared gas pressure: the ultraWAVE 3 takes racks of 7, 20, 27 and 40 vials; the ultraCLAVE digests up to 77 samples at up to 300 °C and up to 200 bar, with a cycle of about 60 minutes for 40 or 77 samples.

Extraction, synthesis and ashing

ETHOS X handles 24 samples in 40 minutes for solvent extraction, with sample amounts up to 30 g. For synthesis, the synthWAVE uses a 1 L PTFE-lined stainless steel chamber at up to 300 °C and up to 199 bar; the flexiWAVE has two 950 W magnetrons, a cavity over 70 L and up to 15 high-pressure vessels.

The ETHOS M microwave muffle furnace replaced the former PYRO system: ashing, sulfated ashing and fusion, up to 18 crucibles, three interchangeable muffle configurations.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.