Nanalysis benchtop NMR spectrometers
Technical selection of Nanalysis equipment: Nanalysis-100, Nanalysis-60 and 60Teach benchtop NMR spectrometers, AUTOsample autosamplers, Flow Kit flow cells and software modules.
Nanalysis-100 benchtop NMR spectrometer
Nanalysis-100 operates at 100 MHz (2.35 T) with a permanent magnet and no cryogens. Specified resolution is below 0.5 Hz (below 0.005 ppm) at 50% line height. Sensitivity on 1% ethylbenzene in one scan is above 250:1 single channel and above 220:1 dual channel.
- 100 MHz, 2.35 T
- Resolution below 0.5 Hz
- Sensitivity above 250:1
- Weight 110 kg
Nanalysis-60 benchtop NMR spectrometer
Nanalysis-60 runs at 60 MHz (1.40 T) and is built on the Nanalysis-100 platform. Resolution is below 0.5 Hz (below 0.008 ppm); sensitivity is above 180:1 single channel and above 130:1 dual channel. Its nuclei list includes 1H/19F/11B and 1H/19F/29Si.
- 60 MHz, 1.40 T
- Resolution below 0.5 Hz
- Sensitivity above 180:1
- Weight 43.8 kg
60Teach teaching NMR spectrometer
60Teach is a trimmed-down 60 MHz 1H-only spectrometer for teaching laboratories. Pulse programs: 1D, COSY, JRES, T1 and T2. Size with screen is 30x28x49 cm, weight 26.3 kg. External software controls it through NMReady-CONNECT over JSON.
- 60 MHz, 1H only
- 5 pulse programs
- Size 30x28x49 cm
- Weight 26.3 kg
AUTOsample autosamplers (option)
AUTOsample-60 fits the Nanalysis-60 and AUTOsample-100 fits the Nanalysis-100. Both mount on top without extra bench space and switch between manual and automatic modes. Each has 2 carousels of 25 tubes; experiments are assigned per tube in the queueing software.
- Option for Nanalysis-60/100
- 2 carousels of 25 tubes
- Top mounting
- Experiment queue
Flow Kit flow cell (option)
Flow Kit turns the Nanalysis-60 or Nanalysis-100 into an online NMR detector, used as a stand-alone tool or together with other analytical techniques. The flow-through cell can be sealed from the environment. Experiments start on-board, via NMReady-CONNECT or from third-party software.
- Option for Nanalysis-60/100
- Online NMR detector
- Cell sealed from environment
- Start via NMReady-CONNECT
Nanalysis software modules
The qNMR module works with the Nanalysis-100 and Nanalysis-60 only: the administrator sets acquisition parameters and integral ranges, the operator runs the saved method. Kinetics runs scheduled 1D experiments; Experiment Designer edits pulse sequences on up to two channels.
- qNMR: Nanalysis-60/100 only
- Kinetics: scheduled 1D runs
- Pulses on up to 2 channels
- Gradients as an option
Magnet and site requirements
Nanalysis-60 and Nanalysis-100 use a permanent magnet with no cryogens; the 2 Gauss line stays inside the enclosure. Operating temperature is 18-26 °C, power supply 100-240 VAC, 50-60 Hz. The lock is internal with 1H and 2H options; samples go in standard 5 mm NMR tubes.
- 18-26 °C operation
- 100-240 VAC supply
- Stray field below 2 G
- 5 mm NMR tubes
Choosing a benchtop NMR spectrometer
Nanalysis Scientific Corp. is a public company based in Calgary, Alberta, Canada, that makes compact NMR spectroscopy and MRI equipment. The Nanalysis 60 MHz spectrometer was released in 2013; in 2020 the company acquired RS2D, and its Europe branch is in Mundolsheim, France.
The products page shows the Nanalysis-100 (100 MHz, 2.35 T), the Nanalysis-60 (60 MHz, 1.40 T) on the Nanalysis-100 platform and the 60Teach teaching model (60 MHz, 1H only).
The Nanalysis-100 has shipped since 2020; its nuclei list includes, for example, 1H/19F/13C and 1H/19F/31P, with other combinations on request.
Automation and accessories
AUTOsample-60 and AUTOsample-100 autosamplers mount on top of their own model and hold 2 carousels of 25 tubes. The Flow Kit turns the Nanalysis-60 or Nanalysis-100 into an online NMR detector; the flow-through cell can be sealed from the environment.
The qNMR module works with the Nanalysis-100 and Nanalysis-60 only, Kinetics runs scheduled 1D experiments, and Experiment Designer edits pulse sequences on up to two channels. NMReady-CONNECT talks to the Nanalysis-60 and Nanalysis-100 over gRPC and to the 60Teach over JSON.
RS2D MRI consoles and software
The MRI section shows the fourth-generation multi-channel RS2D console for high to low field applications; the maker positions it for research laboratories and industrial applications.
The spinit software by RS2D runs in the background of the 100 MHz benchtop family and contains the SequenceDevelopment plugin used by Experiment Designer. NMRFx handles processing, visualization and analysis of NMR data.
Nanalysis and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Nanalysis and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Qnami
- Equipment and parts for ELDICO Scientific
- Equipment and parts for Quantum Design
- Equipment and parts for Wasatch Photonics
