Calsitec / Aircrete Europe Calcium Silicate & Sand-Lime Brick Plant Equipment

Turn-key sand-lime brick, fly ash brick and AAC production lines, WKP 750 / 750S / 850 hydraulic presses, mixing plants, autoclaves, handling systems and wear spares.

WKP 750, WKP 750S and WKP 850 Hydraulic Presses

WKP 750, WKP 750S and WKP 850 hydraulic presses use a tie-rod frame with one-sided compaction up to 8,250 kN at 315 bar. Output reaches 9,360 NF/h with 10.0 s cycles up to 115 mm and 12.5 s up to 250 mm. Key spares include seals, valves, mould liners and grippers.

  • Force: 8,250 kN (315 bar) / 6,550 kN
  • Output: up to 9,360 NF/h (10,000/h)
  • Per stroke: 26 NF / 16 4DF / 6 8DF
  • Max stroke 450 mm, brick up to 250 mm

Dosing, Mixing Plants and Reactors

Calsitec / Aircrete Europe mixing plants process silica sand, fly ash, quicklime and water for sand-lime and cement-bound bricks. Units cover sand sieving, dosing scales, premixer with 3-minute cycles, reactor and optional color mixer. Spares include paddles, liners and load cells.

  • Materials: sand, fly ash, quicklime
  • Mixing cycle time: approx. 3 minutes
  • Optional color dosing bypass unit
  • Weighing scales, premixer and reactor

Hardening Trolley Logistics and Traversers

Calsitec / Aircrete Europe manipulators and brick packing robots build pyramid patterns on hardening trolleys for autoclave loading. Traversers transfer up to 6 loaded trolleys using tact pushers or locomotives. Wear spares cover scraper blades, brushes, rail rollers, wheels and sensors.

  • Traverser capacity: up to 6 trolleys
  • Press feed: 1–2 empty hardening trolleys
  • Drive: tact pusher or transfer locomotive
  • Deck cleaning: scrapers and brushes

Autoclaving and Waste Heat Recovery Systems

In Calsitec / Aircrete Europe autoclaves, green units at 0.91–2.20 kg/dm³ cure for 8 hours at 200 °C and 16 bar steam to form CSH phases. Sections combine water prep, steam distribution, dehydration and heat recovery. Key spares include door seals, steam valves and condensate traps.

  • Curing cycle: 8 h at ~200 °C, 16 bar
  • Green density: 0.91 to 2.20 kg/dm³
  • Inter-autoclave steam decompression reuse
  • Condensate recycling and heat exchanger

Transport Systems and Modular Packing Lines

Calsitec / Aircrete Europe packing lines use pallet magazines, chain, roller and belt conveyors, portals and grippers. Pallets receive vertical and horizontal strapping, stretch foil wrapping and marking. Replaceable spares cover strapping heads, chains, rollers and gripper pads.

  • Conveyors: chain, roller, belt and tray
  • Strapping: vertical and horizontal heads
  • Protection: stretch foil and marking unit
  • Portal handlers and pallet magazines

Brick Embossing, Impregnation and Sawing Lines

Calsitec / Aircrete Europe finishing units process facing bricks: Calsitec-Combi-Embosser splits and embosses in one run, while Calsitec-Embosser hits 2,400 stretchers/h. Lines add Calsitec-Impregnator and Calsitec-Brick Saws. Spares cover knives, dies, saw blades and nozzles.

  • Combi-Embosser: split + emboss in 1 run
  • Embosser: up to 2,400 stretchers/h
  • Impregnator: post-emboss moisture seal
  • Brick Saws: facing, corner & half bricks

Turn-Key Calcium Silicate and AAC Plant Engineering

Calsitec, a brand under the flag of Aircrete Europe (headquartered in Oldenzaal, Netherlands), delivers turn-key plants and core machinery for calcium-silicate units (sand-lime bricks), fly ash bricks, AAC blocks and ceramic products.

Combining Aircrete Europe expertise with acquired former WKB Systems intellectual property, the engineering team draws on projects across 100+ factories on 6 continents.

Each line integrates raw material dosing (silica sand, quicklime, water, optional fly ash or color dosing), 3-minute cycle mixing plants, WKP 750 / 750S / 850 hydraulic presses, 6-trolley traversers, 16-bar autoclaves with waste heat recovery and modular packaging lines.

WKP Press Variants and Autoclave Energy Recovery

All WKP 750, WKP 750S and WKP 850 presses use a heavy-duty tie-rod structure with one-sided hydraulic compaction (8,250 kN max at 315 bar, 6,550 kN operating, 450 mm max stroke, up to 250 mm brick height).

While WKP 750 feeds from a flapless bunker with carriage-mounted gripper, WKP 750S adds a lifting/lowering table and WKP 850 includes a flapped bunker for improved mould filling.

During the 8-hour steam curing cycle at approx. 200 °C and 16 bar, decompression steam is routed between autoclaves via the steam distribution unit and condensate heat is recovered in heat exchangers for water preheating or plant heating.

Brick Finishing, Modular Retrofits and Spare Parts Support

Value-adding finishing machines include Calsitec-Combi-Embosser (simultaneous splitting and embossing of stretcher and header), Calsitec-Embosser (up to 2,400 stretchers/h), Calsitec-Impregnator for post-emboss weather protection and Calsitec-Brick Saws for corner and shaped facing bricks.

Modular modernization programs upgrade mixing plants, hydraulic presses, trolley logistics, packaging lines and automation inside existing factory buildings alongside remote support and wear parts availability.

Calsitec / Aircrete Europe and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Calsitec / Aircrete Europe and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.