Kiremko Potato Processing Lines: Peeling, Cutting, Frying
Kiremko machines (Netherlands) for French fry, potato chip, flake and pellet snack lines: STRATA Invicta steam peelers, QuadraFlow hydro cutters, blanchers, CORDA Invicta fryers, oil filters and drum dryers.
STRATA Invicta Steam Peelers and PeelGuard
STRATA Invicta is the Kiremko potato steam peeler that sets the capacity of the whole line. Its cooking ring is 20% smaller, and peel waste is reduced by up to 10%. After peeling, PeelGuard optically detects residual peels and dark, green or black spots.
- Cooking ring: 20% smaller
- Peel waste: down by up to 10%
- Steam release valve: wear-resistant
- Weigh hopper: built-in calibration
QuadraFlow Hydro Cutters and KnifeGuard
The Quadra Flow hydro cutter makes French fries, wedges and slices. The knife block is changed in minutes with an exchanger, and blockages are cleared without stopping. Kiremko KnifeGuard checks inlet, knife block and outlet by RFID tags and tracks knife block hours.
- Knife block: changed in minutes
- Blockages: cleared without stopping
- KnifeGuard: RFID tags on parts
- Knife block working time tracked
Potato and Strip Sorting
The Kiremko sorter grades peeled potatoes by diameter on conical rollers with increasing pitch. The Sliver Remover removes as much as 98% of cutting residue; accuracy depends on roller diameter and rotation speed. The length grader sorts French fries into one, two or three layers.
- Potato grading: by diameter
- Cutting residue: up to 98% removed
- Length grading: 1–3 layers
- Sieves: two decks, interchangeable
Hi-Flow and Screw Type Blanchers
Hi-Flow is the Kiremko blancher for potato chip slices: warm water blanches the slices separately, a cross flow keeps blanching even, and a lifting mechanism opens the machine for cleaning and maintenance. The screw type blancher serves French fry, flake and mash lines.
- Hi-Flow: cross flow water
- Hi-Flow: lifting mechanism
- Screw type: fries, flakes, mash
- Screw type: pumps even out temperature
CORDA Invicta and Potato Chip Fryers
CORDA Invicta is the Kiremko French fry fryer: per the maker, it uses 30% less oil and has a 15% smaller footprint, with a full metal belt and integrated chain link. In the potato chip fryer two stacks keep a blanket of steam over the oil. Pellet snacks fry in 6 to 30 seconds.
- CORDA Invicta: 30% less oil
- CORDA Invicta footprint: 15% smaller
- Belt: full metal with chain link
- Pellet snacks: 6–30 s frying
Frying Oil Filtration
The Primary Oil Filter connects directly to the fryer oil discharge and filters the complete oil flow; oil content is 7–10% lower than with a conventional belt filter, and the smallest perforation is 0.8 mm. The paper filter removes the smallest starch particles, nominally 7–10 m³/h.
- Perforation: from 0.8 mm
- Oil content: 7–10% lower
- Paper filter: 7–10 m³/h
- Connection: fryer oil discharge
Batter Preparation and Coating
The Kiremko batter preparation system mixes the batter; a multiple-tank system handles ripening, settling and distribution; temperature and viscosity are monitored continually. The enrobing system coats products from top and bottom, and drip-off belts with air knives remove excess.
- Tanks: ripening and settling
- Control: temperature and viscosity
- Option: submerging for thick batter
- Excess batter: air knives
Drum Dryers, WeighGuard and VPCK Pumps
The Kiremko drum dryer, developed with Idaho Steel, dries cooked potatoes into flakes at up to 1,200 kg/h. WeighGuard doses salt, dextrose and flavourings with a loss-in-weight system on weighing cells. The VPCK product pump transports potatoes and vegetables in water.
- Drum dryer: up to 1,200 kg/h
- Applicator rolls: auto adjustment
- WeighGuard: SCADA connection
- VPCK pump: VDKK successor
Selecting Kiremko Machines by Line Section
A Kiremko French fry line runs in sections: STRATA Invicta steam peeling with PeelGuard inspection, QuadraFlow hydro cutting with KnifeGuard, grading by diameter and length, blanching, belt drying, batter coating, and CORDA Invicta frying with oil filtration.
Potato chip lines use the Hi-Flow blancher, the potato chips fryer and the WeighGuard flavouring doser.
Flake lines use a drum dryer rated up to 1,200 kg/h, and pellet snack lines a fryer with 6 to 30 seconds frying time and a paper oil filter rated 7–10 m³/h. The VPCK product pump transports potatoes and vegetables in water between machines.
Partner Machines in the Lines
In the Foodera Technologies range, partner developments sit next to Kiremko machines.
Kiremko developed its drum dryer together with Idaho Steel, the Nex-Gem4 former was developed and tested in the USA by Idaho Steel, the EcoMiser oil recovery system was developed by Reyco Systems, and Tridis 240P dicers are designed by FAM.
When matching parts or replacing machines, the developer matters: brand and model are checked on the nameplate.
Kiremko Company
Kiremko was founded in 1965 and is headquartered in Montfoort, the Netherlands. Since 1996 Kiremko, Idaho Steel and Reyco have worked as a tri-brand partnership; today they are united under the Foodera Technologies name and continue as product brands.
In August 2025 Investindustrial announced an agreement to acquire Foodera Technologies. The EMEA and APAC team provides technical support, troubleshooting, spare parts, maintenance and commissioning.
Kiremko and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Kiremko and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Starfrost
- Equipment and parts for Flavourtech
- Equipment and parts for Satake
- Equipment and parts for Universal Pack
Documents and sources
- Locations — Kiremko office in Montfoort
- About us — product brands
- Home — Foodera Technologies brands
- News — founding year and acquisition agreement
- Support — service and spare parts
- STRATA Invicta steam peeler — design
- PeelGuard — peeling inspection
- Quadra Flow hydro cutter — cut products
- KnifeGuard — knife identification
- Potato sorter — grading by diameter
- French fry line — machines and parts
- Potato chip line — blancher and fryer
- Pellet snack line — frying and filters
- Hash brown line — partner machines
- Hi-Flow blancher — application
- Belt dryer — design
- CORDA Invicta fryer — parameters
- Potato chips fryer — steam blanket and temperature
- Pellet snack fryer — maintenance access
- Primary Oil Filter — parameters
- Paper filter — application
- Drum dryer — capacity
- WeighGuard — design
- Product pump — impeller
- EcoMiser — developer
