Herzog Maschinenfabrik (HERZOG) Sample Preparation Equipment

Industrial laboratory crushers, vibratory disc mills, pellet presses, fusion machines, metal milling units, pneumatic tube transport, and turnkey robotic laboratories by Herzog Maschinenfabrik (HERZOG) for mining, steel, cement, and chemical QC.

Crushers and Vibratory Disc Mills

HERZOG jaw crushers HSC 550, HSC 590, HSC 650D, HP-CA, and cone crusher HP-CM AUT feed vibratory mills HP-M 1500, HP-MA, HP-M 100P, HSM, ball mill HP-PKM, and combined HP-MP. Grinding sets use chrome steel or tungsten carbide. Service parts cover jaws, bowls, and springs.

  • Jaw & cone feed: < 15–200 mm
  • Mill feed & volume: < 5 mm, 100–1500 ccm
  • HP-MP speed: 600–1500 rpm
  • Bowls: chrome steel, tungsten carbide

Laboratory Pelletizing Presses

HERZOG Maschinenfabrik presses HP-PA, HP-PS, HP-PD6, HTP, TP 20 E, and TP/2D compact powders into pellets for XRF and XRD spectroscopy. Tooling handles 40 mm and 51.5 mm steel rings, aluminum cups, and free pressing. Spares include punches, dies, and hydraulic seals.

  • Pressing force: 200–600 kN
  • Steel rings: 40 mm and 51.5 mm
  • HP-MP press range: 50–200 kN
  • Models: HP-PA, HP-PS, HP-PD6, HTP

Automatic and Benchtop Fusion Systems

Bead One HF, Bead One R, HA-HF 16, HAG-HF, and HAG-System fusion units melt oxides and slags with fluxes up to 1300 °C for XRF and ICP. High-frequency induction or resistance heating forms glass beads. Service parts include coils, heaters, thermocouples, and flux feeders.

  • Max fusion temperature: 1300 °C
  • Glass beads: 29 / 32 / 34 / 36 / 39 mm
  • Heating: HF induction & resistance
  • Methods: XRF, ICP, AA analysis

Metal Sample Milling, Cutting and Grinding

Machines HS-F 1000, HS-CF, HB 3000, HTS 3000, HN-FF/HN-SF, HAF/2, HS 200, HT 350, HCP, and HUST prepare steel, pig iron, aluminum, and copper for OES and XRF. Key spares cover cutting inserts, milling heads, grinding belts, cup wheels, and clamping jaws.

  • Ferrous prep: HS-F 1000, HB 3000, HTS 3000
  • Non-ferrous milling: HN-FF, HN-SF, HAF/2
  • Cutting & punching: HCP, HUST-AUT
  • Wear parts: inserts, belts, cup wheels

Samplers, Splitters and Dosing Units

Samplers HR-KN, HR-KNH, HR-PN, HR-RN, and HR-SN collect clinker, hot meal up to 900 °C, and powders, while splitters HP-RSD and gravimetric feeders HP-GCD, HP-GSD, HP-GID, HP-DT 2 meter aliquots. Spares cover screws, pistons, seals, and weighing cells.

  • Hot meal HR-KNH: < 900 °C, 50 ccm
  • Clinker HR-KN: < 80 mm, 1–10 l
  • Rotary splitters HP-RSD: 6–288 kg
  • Gravimetric feeders: HP-GCD, HP-GSD

Pneumatic Tube Sample Transport

Pneumatic tube systems HR-B/HR-BM, HR-HSK/B, HR-HS/L, HR-LA, HR-LSP, HR-LSM, HR-LKC, HR-ES, and diverters HR-W2/HR-W3 convey steel and powder carriers between plant and laboratory with automated cooling and unpacking. Service spares include carriers, seals, diverter actuators, valves, and sensors.

  • Plant stations: HR-B/HR-BM (up to 15 l)
  • Lab stations: HR-LA, HR-LSP, HR-LSM
  • Unpacking & cooling: HR-ES, HR-ES/L
  • Tube switches: HR-W2, HR-W3

Liquid Lab Wet Chemistry Automation

Liquid Lab automates open-vessel and microwave digestion, fusion, dilution, and transfer to ICP-OES and ICP-MS using HL-HBDU, HL-MDU, HL-HAG, HL-DU, HL-TU, HL-ATU, HL-ACU, and HL-CU modules. Service spares include syringe pumps, PFA tubing, and grippers.

  • Target analyzers: ICP-OES, ICP-MS
  • Digestion modules: HL-HBDU, HL-MDU, HL-HAG
  • Liquid handling: HL-DU, HL-TU, HL-ATU
  • Sample states: liquid, paste, powder, solid

Standard Automations and PrepMaster SCADA

Turnkey automation cells AtLine Lab, SteelLab, MetalLab, OES Lab, CNS Lab, and FoundryLab integrate sample preparation with analyzers under PrepMaster Core, Entry, Analytics, Vision, and Raw Mix Control software. Hardware service parts include PLC I/O modules, wear sensors, cameras, and HMI panels.

  • Cells: AtLine Lab, SteelLab, FoundryLab
  • Lab lines: MetalLab, OES Lab, CNS Lab
  • Software: PrepMaster Core & Analytics
  • Monitoring: tool condition & SPC

Selecting HERZOG Maschinenfabrik Systems by Analytical Method

System configuration depends on sample state and downstream instrumentation.

For XRF and XRD control of cement, clinker, ores, and slags, HERZOG pairs jaw and cone crushers (HSC 550, HSC 590, HP-CA, HP-CM AUT) with vibratory disc mills (HP-MA, HP-M 1500), pellet presses (HP-PA, HTP, HP-PD6), or the compact combined mill-press HP-MP.

When mineralogical and particle-size effects must be eliminated, Bead One HF/R, HA-HF 16, and HAG-HF fusion machines melt oxides with borate fluxes up to 1300 °C. Metal samples for spark OES and combustion analysis are milled or ground on HS-F 1000, HB 3000, HTS 3000, and HN-FF/HAF/2 machines, while Liquid Lab automates acid and microwave digestion for ICP-OES and ICP-MS.

Scaling from Stand-Alone Units to Turnkey Laboratory Automation

Stand-alone units such as HSM, HTP, TP 20 E, and Bead One suit low-to-medium sample throughput, whereas high-volume plants integrate pneumatic tube stations (HR series), rotary samplers (HR-KN, HR-KNH), robotic cells (AtLine Lab, SteelLab, FoundryLab), and PrepMaster Core / Analytics software for continuous 24/7 operation.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.