Biolin Scientific: Attension tensiometers, QSense QCM-D and KSV NIMA troughs
Technical selection of Biolin Scientific instruments (Gothenburg, Sweden): Attension Theta optical and Sigma force tensiometers, QSense QCM-D quartz crystal microbalances and KSV NIMA Langmuir-Blodgett troughs.
Theta Flow, Flex and Lite optical tensiometers
They measure contact angle, surface and interfacial tension. All three cover 0–180° and 0.01–2000 mN/m with ±0.1° and ±0.01 mN/m accuracy. The Theta Flow records 2592 × 2048 px at up to 3422 fps and tracks ambient temperature and humidity. The Theta Lite is a compact 5 kg unit.
- Contact angle: 0–180°
- Tension: 0.01–2000 mN/m
- Accuracy: ±0.1° and ±0.01 mN/m
- Theta Flow camera: 3422 fps
Theta High Pressure, Pico and Wafer
The Theta High Pressure mimics reservoir conditions at up to 400 bar, with optional chamber heating up to 200 °C. The Theta Pico measures drops under 100 µm. The Theta Wafer measures contact angle on silicon wafers automatically, with 4 disposable tips, alignment pins and vacuum.
- High Pressure: up to 400 bar
- Optional heating: up to 200 °C
- Theta Pico: drops under 100 µm
- Theta Wafer: 4 disposable tips
Sigma Peak, Solo and Base force tensiometers
They measure surface and interfacial tension with a Du Noüy ring or Wilhelmy plate. The automated Sigma Peak covers 1–2000 mN/m with 125 mm stage travel and a 250 or 210 g balance. The Sigma Solo runs without a PC and stores 100 results. The manual Sigma Base covers 1–1000 mN/m, 5 g load.
- Sigma Peak: 125 mm stage travel
- Sigma Peak balance: 250 or 210 g
- Sigma Solo memory: 100 results
- Sigma Base: 1–1000 mN/m
Sigma Transformer Oil and Sigma CMC analyzers
The Sigma Transformer Oil measures interfacial tension of transformer oil to ASTM D971 or IEC 62961, takes an optional thermostatic vessel for −20 to +200 °C and weighs 15 kg. The Sigma CMC determines critical micelle concentration automatically, with a 250 g balance and a weight of 17 kg.
- Transformer oil: ASTM D971
- Method: IEC 62961
- Optional thermostat: −20…+200 °C
- Sigma CMC balance: 250 g
QSense Omni and Pro automated QCM-D
Quartz crystal microbalances with dissipation monitoring for real-time studies of adsorption and films. The QSense Omni has 1–4 channels, 4–70 °C, 1–200 µL/min flow and a 0.24 ng/cm² LOD. The QSense Pro has 8 channels, needs 50 µL minimum in flow mode and runs unattended.
- Omni channels: 1–4
- Omni LOD: 0.24 ng/cm²
- QSense Pro channels: 8
- QSense Pro sample: from 50 µL
QSense Analyzer, Core One and Initiator
The QSense Analyzer has 4 channels and works at 15–65 °C. The Core One is a single-channel unit for 15–65 °C that measures 7 harmonics, with a 2 kg electronics unit and a 1.5 kg chamber. The entry-level Initiator has 1 channel, 2 harmonics and a 20–45 °C range.
- Analyzer channels: 4
- Analyzer: 15–65 °C
- Core One: 7 harmonics
- Initiator: 20–45 °C
QSense sensors and modules
5 MHz sensors 14 mm in diameter, over 50 standard ones including QSX 301 gold, QSX 303 silicon dioxide and QSX 304 stainless steel. The QFM 401 flow module holds about 140 µL, and its H version takes up to 150 °C. The 2 kg QHTC 101 chamber covers 4–150 °C with a cooler or hot plate.
- Sensor: 14 mm, 5 MHz
- Over 50 standard sensors
- QFM 401 module: about 140 µL
- QHTC 101 with cooler or hot plate: 4–150 °C
KSV NIMA Langmuir-Blodgett troughs
Troughs for monolayers and coatings with controlled packing density: 98–841 cm² area, barriers at 0.1–270 mm/min, a 0–300 mN/m surface pressure balance and dipping at 0.1–108 mm/min. Tops are solid PTFE. The MicroBAM microscope (12 µm) checks the monolayer before deposition.
- Trough area: 98–841 cm²
- Barriers: 0.1–270 mm/min
- Surface pressure: 0–300 mN/m
- Dipping: 0.1–108 mm/min
Choosing a tensiometer: optical or force
Theta optical tensiometers measure contact angle, surface and interfacial tension over 0–180° and 0.01–2000 mN/m with ±0.1° and ±0.01 mN/m accuracy. The automated Theta Flow records 2592 × 2048 px at up to 3422 fps; the 5 kg Theta Lite uses manual fine focus on an optical rail.
The Theta High Pressure covers reservoir conditions up to 400 bar, and the Theta Wafer measures silicon wafers.
Sigma force tensiometers use a Du Noüy ring or Wilhelmy plate: the Sigma Peak covers 1–2000 mN/m with 125 mm of stage travel, and the manual Sigma Base covers 1–1000 mN/m. The Sigma Transformer Oil tests transformer oil to ASTM D971 and IEC 62961, and the Sigma CMC determines critical micelle concentration.
Choosing QCM-D by channel count
The Initiator has 1 channel and 2 harmonics at 20–45 °C as a first step into the method. The Core One has 1 channel and 7 harmonics at 15–65 °C. The Analyzer has 4 channels at 15–65 °C. The Omni has 1–4 automated channels at 4–70 °C and a 0.24 ng/cm² LOD.
The Pro has 8 channels, runs unattended and needs 50 µL minimum.
The instruments use 5 MHz sensors 14 mm in diameter, with over 50 standard sensors. For the Analyzer and Pro, the QHTC 101 chamber with an external cooler or hot plate extends the range to 4–150 °C.
KSV NIMA thin films: troughs and layer control
Langmuir and Langmuir-Blodgett troughs come in 98 to 841 cm² of surface area, with barrier speed 0.1–270 mm/min and dipping speed 0.1–108 mm/min; surface pressure of 0–300 mN/m is measured with a platinum Wilhelmy plate.
The MicroBAM microscope (12 µm, USB connection) shows monolayer homogeneity, the SPOT sensor measures surface potential with the vibrating plate capacitor method, and the ISR Flip rheometer uses lightweight magnetized probes to measure viscoelasticity at air-liquid and liquid-liquid interfaces.
Biolin Scientific and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Biolin Scientific and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Biotage
- Equipment and parts for Alicat Scientific
- Equipment and parts for CellaVision
- Equipment and parts for Agilent Spectroscopy
Documents and sources
- About the company — Gothenburg, three brands
- Theta range — technical specifications
- Theta Pico tensiometer — small drops
- Theta High Pressure — pressure and heating
- Theta Wafer — silicon wafers
- Theta tensiometer — discontinued
- Sigma Peak tensiometer — specifications
- Sigma Solo tensiometer — specifications
- Sigma Base tensiometer — specifications
- Sigma Transformer Oil analyzer — specifications
- Sigma CMC tensiometer — specifications
- Sigma 700–703 D — technical specifications
- QSense Omni — specifications
- QSense Pro — specifications
- QSense Analyzer — specifications
- QSense Core One — specifications
- QSense Initiator — specifications
- Sensor FAQ — size and coatings
- QFM 401 flow module — specifications
- QHTC 101 chamber — specifications
- QSense consumables — kits and parts
- QSense pumps — models
- KSV NIMA troughs — technical specifications
- Langmuir and LB troughs — design
- MicroBAM microscope — specifications
- SPOT surface potential sensor — principle
- ISR Flip rheometer — principle
- Attension service — maintenance
- QSense service — preventive maintenance
- KSV NIMA service — installation
