MAKISHINKO Worm Speed Reducers, Screw Jacks and Bevel Gear Boxes
MAKISHINKO power transmission equipment engineered in Japan: single- and double-speed worm reducers (MA, S/A, MAH, H), worm-helical units (MAF, F/U), trapezoidal and ball screw jacks (JA, JB, NX, BX), bevel gear boxes (SB, FB, TB), and GE geared motors.
MA Series Single-Speed Worm Reducers (MakiAce)
Single-speed MakiAce MA worm reducers deliver 85 to 6,708 Nm torque with center distances from 32 to 160 mm and reduction ratios from 10 to 60. Small and medium frames handle 0.1–30 kW at 1800 rpm across solid or hollow shafts. Wear parts include worm sets, seals, and bearings.
- Center distance: 32–40 mm (small) and 50–160 mm (medium)
- Input capacity: 0.1–30 kW at up to 1800 rpm
- Shaft options: solid, hollow, dual input, and dual output
- Service parts: worm shaft, bronze wheel, oil seals, bearings
S and A/AO Heavy-Duty Single-Speed Worm Reducers
Heavy-duty S and A/AO single-speed worm reducers cover 19 frame sizes from 50 to 500 mm with output torque up to 56,600 Nm and 0.3 to 255 kW input. Available in B (bottom worm), W (top worm), and K (orthogonal) builds. Maintenance kits cover bronze wheels, bearings, and shaft seals.
- S series: 19 models (50–500 mm), torque 12.7–56,600 Nm
- A/AO series: ratios 10–60, output torque 14–9,990 Nm
- Layouts: B (bottom worm), W (top worm), K (orthogonal output)
- Heavy machinery: conveyors, winches, cranes, roll forming
MAH and H Double-Speed Worm Reducers
MAH and H double-speed worm reducers pair two worm stages for high reduction ratios from 100 to 3600. The compact MAH line (MAHB, MAHK, MAHOB, MAHOK) handles 88 to 3,570 Nm, while heavy-duty H units (BH, KH, AH, AOH) deliver 113 to 56,600 Nm. Built for quiet lift and stage drives.
- Reduction ratio: high double-stage ratios from 100 to 3,600
- MAH torque range: 190–3,570 Nm (88–3,570 Nm across variants)
- H series torque: 113–56,600 Nm (worm + worm stages)
- Models: MAHB, MAHK, MAHOB, MAHOK, BH, KH, AH, AOH
MAF and F/U Worm-Helical Double-Speed Reducers
MAF (worm/helical) and F/U (helical/worm) double-speed reducers combine high efficiency with orthogonal shaft layouts. MAF sizes 100 to 200 deliver 405 to 6,700 Nm, while 14 F/U models (80 to 500) cover 208 to 56,600 Nm. Replacement items cover helical pinions, worm wheels, and seals.
- MAF sizes: 100, 125, 160, 200; torque 405–6,700 Nm (ratios 50–360)
- F/U sizes: 14 models from 80 to 500; ratios 80–180
- F/U torque: 208–56,600 Nm across F, U, US, AF, AOF series
- Shaft layouts: single, dual output, and hollow configurations
JA, JAH, JAS, and JTA Trapezoidal Screw Jacks
Trapezoidal screw jacks in JA, JAH, JAS, and JTA series span 2 to 1,250 kN capacity with self-locking retention on power loss. Units from 2 to 10 kN use grease (oil bath on JA002 and 25 kN+) with tapered roller bearings. Replacement nuts, screws, and bellows are supported.
- Standard capacity: 2 to 1,250 kN (custom designs up to 2,000 kN)
- Self-locking trapezoidal screw for static load holding
- Bearings & lubrication: tapered roller bearings, grease or oil bath
- Accessories: protective bellows, counter/cam switches, encoders
JB Ball Screw Jacks and NX/BX Bevel Jacks
JB, JBH, and JTB ball screw jacks span 5 to 1,250 kN with an integrated ball nut and aluminum-bronze worm wheel in an oil-bath housing. NX (trapezoidal, 30% efficiency) and BX (ball screw, 80% efficiency) bevel jacks in sizes 19 and 25 handle 20 and 50 kN for synchronized lifting.
- JB/JBH/JTB capacity: 5–1,250 kN with oil-bath worm lubrication
- Integrated ball nut & bronze wheel plus screw baffle protection
- NX/BX bevel jacks: sizes 19 (20 kN) and 25 (50 kN), up to 400 rpm
- Standard strokes: 100, 200, 300, 400, 500 mm (ratios 2.5 and 2)
SB, FB, TB Bevel Gear Boxes and GE Geared Motors
Spiral and straight bevel gear boxes in SB, FB, and TB series provide right-angle power splitting alongside compact GE geared motors from 0.1 to 2.2 kW. SB covers sizes 19–85 and FB handles shock (1:1 to 2:1). TB offers aluminum housings and stainless shafts.
- SB series: sizes 19–85, 2/3/4 shafts, horizontal/vertical mounting
- FB series: rugged spiral/straight gearing for shock & vibration
- TB series: grease-filled aluminum housing, optional stainless shafts
- GE geared motor: 0.1–2.2 kW motor output, reduction ratio 5–200
Selecting MAKISHINKO Worm and Helical-Worm Speed Reducers
The MakiAce MA single-speed worm line covers 32 to 160 mm center distances, ratios 10 to 60 (up to 360), and torque from 85 to 6,708 Nm, including servo-ready low-backlash configurations within 30 arcminutes and lightweight aluminum MAL housings.
Heavy industrial drives utilize S and A/AO single-speed reducers across 19 frame sizes (50–500 mm) rated up to 56,600 Nm and 255 kW.
For high ratios from 100 to 3,600, double-speed MAH and H worm reducers deliver compact orthogonal layouts, while MAF (sizes 100–200) and F/U (14 sizes from 80 to 500) combine helical and worm gearing for higher efficiency. Compact GE geared motors cover 0.1 to 2.2 kW with ratios 5 to 200.
Configuring Screw Jacks, Bevel Gear Boxes, and Operating Limits
Trapezoidal screw jacks (JA, JAH, JAS, JTA) provide self-locking load holding across 2 to 1,250 kN, while ball screw jacks (JB, JBH, JTB; 5 to 1,250 kN) integrate the ball nut with an aluminum-bronze worm wheel inside an oil-bath housing for frequent cycles.
Bevel jacks NX (30% efficiency) and BX (80% efficiency) in sizes 19 and 25 simplify multi-jack synchronization.
SB, FB, and TB bevel gear boxes split power at 90 degrees across 2, 3, or 4 shafts, with optional stainless steel shafts on TB units. Manufacturer guidelines specify initial break-in oil replacement after approximately 50 hours on worm reducers and annual oil renewal thereafter.
MAKISHINKO and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of MAKISHINKO and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for RENK
- Equipment and parts for RICKMEIER
- Equipment and parts for ROEMHELD
- Equipment and parts for Sheffer
Documents and sources
- MAKISHINKO Co., Ltd. Corporate Profile (Osaka, Japan)
- Nabari Plant Production and ISO 9001:2015 Quality Control System
- MA Series Single-Speed Worm Speed Reducer (MakiAce)
- Worm Speed Reducers Overview and 50-Hour Running-In Oil Change
- S and A/AO Series Single-Speed Worm Speed Reducers
- MAH Series Double-Speed Worm Speed Reducers
- H Series Double-Speed Worm/Worm Speed Reducers
- MAF Series Worm/Helical Double-Speed Reducers
- F/U Series Helical/Worm Double-Speed Reducers
- JA, JAH, JAS and JTA Series Trapezoidal Screw Jacks
- JB, JBH and JTB Series Ball Screw Jacks
- NX Series Bevel Jacks (Trapezoidal Screw)
- BX Series Bevel Jacks (Ball Screw)
- Screw and Bevel Jacks Lineup, Bellows and Control Options
- SB, FB and TB Series Bevel Gear Boxes
- GE Series Geared Motors (0.1 to 2.2 kW)
- Industrial Application Examples of MAKISHINKO Gear Technologies
