Sheffer (The Sheffer Corporation) Hydraulic, Pneumatic & Custom Cylinders

Industrial tie-rod hydraulic cylinders (HH, MH, UH, CL), pneumatic actuators (A, MA, C20, AA), custom telescopic cylinders, and mounting hardware from The Sheffer Corporation.

HH Series Heavy-Duty Hydraulic Cylinders

Sheffer HH Series heavy-duty tie-rod hydraulic cylinders deliver 3,000 psi working pressure and 5,000 psi shock pressure with removable rod glands, separate rod bearings, and slipper piston seals. Built to NFPA standards. Replaceable glands, wipers, and seal kits support upkeep.

  • Working pressure: up to 3,000 psi
  • Shock pressure: up to 5,000 psi
  • Construction: NFPA tie-rod design
  • Service parts: gland, bearing, piston seal

MH Series Medium-Duty Hydraulic Cylinders

The Sheffer Corporation MH Series medium-duty tie-rod hydraulic cylinders operate from 800 to 2,000 psi in general industrial fluid power systems. NFPA construction simplifies installation and interchange. Service parts include rod seal kits, piston seals, removable glands, and rod bearings.

  • Working pressure: 800 to 2,000 psi
  • Duty level: medium-duty tie-rod
  • Interchange: NFPA / ANSI dimensions
  • Spares: seal kits, glands, rod bearings

UH Series Ultra High-Pressure Hydraulic Cylinders

Sheffer UH Series ultra high-pressure hydraulic cylinders serve extreme pressure environments where standard tie-rod designs fall short. Reinforced barrels and heads handle demanding press and test loads. Maintenance spares cover high-pressure rod seals, piston wear rings, and gland assemblies.

  • Rating: ultra high-pressure service
  • Application: extreme pressure equipment
  • Spares: high-pressure seals and rings
  • Identification: UH series nameplate code

A & MA Series Tie-Rod Pneumatic Cylinders

Sheffer pneumatic cylinder series A (250 psi) and MA (200 psi) cover standard bores from 3/4 inch through 14 inches with NFPA tie-rod interchangeability and custom large-bore builds. Series A targets heavy cycling; MA serves general automation. Rod glands, bearings, and seal kits are serviceable.

  • A Series rating: 250 psi heavy duty
  • MA Series rating: 200 psi medium duty
  • Catalog bores: 3/4" through 14"
  • Spares: U-cup seals, glands, bearings

C20 Ferrous & AA Aluminum Pneumatic Cylinders

Sheffer C20 Series ferrous-body pneumatic cylinders (200 psi) endure harsh plant conditions and high shock loads where aluminum housings fail. Lightweight AA Series aluminum units (200 psi) target high-volume OEM builds. Both lines support field replacement of rod wipers, bushings, and piston seals.

  • C20 Series: rugged ferrous body, 200 psi
  • AA Series: lightweight aluminum, 200 psi
  • Service: harsh shock vs. OEM lines
  • Spares: wipers, bushings, piston seals

CL Series Heavy-Duty Clamp Cylinders (CLA / CLH)

Sheffer CL Series compact clamp cylinders secure tooling and workholding fixtures across automated lines. Cataloged variants cover CLA at 150 psi pneumatic and CLH at 250 psi pneumatic or 1,500 psi hydraulic. Service spares include rod wipers, gland seals, bushings, and mounting hardware.

  • CLA rating: 150 psi pneumatic clamp
  • CLH rating: 250 psi air / 1,500 psi oil
  • Application: clamping and tooling fixtures
  • Spares: wipers, gland seals, bushings

Custom, Telescopic & Electronic Positioning Cylinders

The Sheffer Corporation builds custom, long-stroke, and multi-stage telescoping cylinders up to 60+ inch bores and 100-foot strokes alongside electronic positioning units. UK division Helipebs Controls produces metric EH, ER, and SM lines. Custom seals, rods, and glands are sourced by serial number.

  • Custom bore capacity: 60"+ bores
  • Long stroke: up to 100-foot travel
  • Helipebs UK lines: EH, ER, SM series
  • Controls: electronic position feedback

Cylinder Accessories, Sensors & Mounting Hardware

Sheffer cylinder accessories include S.A.F.E. self-aligning flange ends, Uni-Lign alignment mounts, valve blocks, and mechanical, magnetic, or proximity limit switch actuators. Clevis brackets, rod eyes, pin retainers, and couplers complete mounts. Spares match nameplate codes.

  • Alignment: S.A.F.E. flange and Uni-Lign
  • Sensing: limit switches and positioners
  • Linkage: clevis brackets, rod eyes, pins
  • Manifolds: valve mounting blocks

NFPA/ANSI Interchangeability & Engineering Selection

Hydraulic and pneumatic cylinders from The Sheffer Corporation (HH, MH, A, and MA series) follow ANSI, NFPA, and JIC mounting standards, supporting straightforward integration into heavy industrial machinery and drop-in replacement of standard NFPA tie-rod units.

To prepare an accurate configuration and quote, specify the series, bore diameter, stroke length, working and shock pressure, mounting style, cushioning requirements, fluid medium, and operating environment.

Custom Large-Bore, UK Metric Lines & Mounting Options

Beyond standard catalog bores, the Cincinnati plant manufactures specialty and multi-stage telescoping cylinders up to 60+ inch bores and 100-foot strokes, while UK subsidiary Helipebs Controls produces metric EH and ER series alongside imperial SM and offshore actuation assemblies.

Optional S.A.F.E. self-aligning flanges, Uni-Lign mounting accessories, valve blocks, and mechanical, magnetic, or proximity limit switches can be matched directly to the cylinder specification.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.