HAM-LET Group / UCT Fluid Solutions Valves and Fittings
Instrumentation valves, LET-LOK compression tube fittings, HRG gas regulators, H-600 filters, and ultra-clean diaphragm valves by HAM-LET Group (UCT Fluid Solutions) up to 60000 psig.
LET-LOK and ONE-LOK Tube Fittings
LET-LOK double-ferrule and ONE-LOK fittings cover 1/16–2 in. and 2–50 mm tubes in 316/316L SS, brass, and alloys. HAM-LET Group (UCT Fluid Solutions) fittings resist pressure, vibration, and vacuum. Spare parts include front and back ferrules, nuts, and bodies.
- Sizes 1/16"–2" and 2–50 mm
- 316/316L SS, brass, alloys
- Vibration and vacuum rated
- Ferrule sets and nuts
Ball Valves H6800, H-800, H-500, and H-700
HAM-LET (UCT Fluid Solutions) H6800, H-800, H-500, and H-700 ball valves operate up to 6000 psig (413 bar). Bodies use 316/316L stainless steel, brass, Alloy 400, Alloy C-276, and Super Duplex. Replaceable parts include PCTFE, PEEK, and PTFE seats, body seals, packings, and stems.
- Rated up to 6000 psig (413 bar)
- 316 SS, Alloy 400, C-276, Duplex
- 2-way, 3-way, and CNG versions
- PCTFE, PEEK, and PTFE seats
Needle Valves H-300U and H-99
HAM-LET H-300U and H-99 needle valves handle up to 5000 psig (345 bar) and 230 °C with Cv values from 0.09 to 1.8. Port sizes cover 1/8 to 3/4 in. and 3–12 mm with ISO 15848 fugitive-emission packing. Replaceable parts include 316 SS stems, PTFE chevron packings, and SST 302 Belleville washers.
- MAWP 5000 psig (345 bar)
- MAWT 230 °C, Cv 0.09 to 1.8
- ISO 15848 low-emission packing
- 316 SS stems and PTFE packing
Check and Relief Valves H-400 and H-900
HAM-LET H-400 check valves (up to 6000 psig / 413 bar in HP) and H-900/H-911 relief and excess-flow valves protect instrument lines. Bodies are machined in 316 SS and specialty alloys with cracking springs from 1/3 to 25 psi. Spare parts include FKM O-rings, poppets, and SST 304 springs.
- Rated up to 6000 psig (413 bar)
- Cracking springs 1/3 to 25 psi
- H-400 HP, OP, and CNG models
- FKM O-rings and 316 SS poppets
High-Pressure HHP and HM Extreme Diaphragm Valves
HAM-LET High Pressure (HHP) 316 SS valves and Cone & Thread fittings reach 60000 psig (4134 bar) per ASME B31.1 and B31.3. Ultra-clean HM Extreme valves with Co-Cr-Ni diaphragms and PFA seats run up to 225 °C. Spare parts include diaphragms, seats, actuators, and rupture discs.
- HHP up to 60000 psig (4134 bar)
- Cone and Thread (C&T) joints
- HMX Co-Cr-Ni diaphragm up to 225 °C
- PFA seats, actuators, rupture discs
H-600 Filters and HRG Gas Pressure Regulators
HAM-LET H-600 and H-600R 316 SST filters handle 6000 psi (413 bar) up to 482 °C, while HRG gas regulators take inlet pressures up to 300 bar. Single- and dual-stage HRG models deliver Cv 0.0106 to 0.091. Spare parts include 0.1–90 μm sintered elements, silver-plated gaskets, and SST 302 springs.
- H-600 rated 6000 psi, up to 482 °C
- Sintered elements 0.1 to 90 μm
- HRG inlet up to 300 bar
- HRG outlet 0.2 to 200 bar
Instrumentation Fluid Lines and High-Pressure Systems up to 60000 psi
HAM-LET Group (UCT Fluid Solutions) delivers a complete instrumentation fluid-control portfolio: LET-LOK double-ferrule and ONE-LOK single-ferrule fittings for 1/16–2 in.
and 2–50 mm tubing, H6800/H-800/H-500 ball valves, H-300U/H-99 needle valves, and HHP Cone and Thread components rated to 60000 psig (4134 bar) per ASME B31.1 and B31.3.
For semiconductor ALD, ALE, and CVD precursor delivery, HM Extreme and UCV ultra-clean diaphragm valves combine Co-Cr-Ni alloy diaphragms with PFA seats rated up to 225 °C, paired with HRG clean-gas pressure regulators up to 300 bar inlet.
Corrosion-Resistant Alloys, Filtration, and Spare Kits
Depending on gas or liquid chemistry, bodies are supplied in 316/316L VAR stainless steel, brass ASTM B-16, Alloy 400, Alloy C-276, and Super Duplex. H-600 and H-600R inline filters handle up to 6000 psi and 482 °C with replaceable sintered 316 SST elements from 0.1 to 90 μm.
Spare ferrule sets, nuts, PTFE/PCTFE/PEEK valve seat kits, chevron packings, and FKM O-rings support planned maintenance across oil and gas, chemical, power, and hydrogen systems.
HAM-LET Group and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of HAM-LET Group and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for HO-Matic
- Equipment and parts for Hoffer Flow Controls
- Equipment and parts for Hansen Technologies
- Equipment and parts for ZOOK Enterprises
Documents and sources
- UCT Fluid Solutions Official Portal — HAM-LET Valves and Fittings Portfolio
- HAM-LET LET-LOK Compression Tube Fittings Catalog (2025)
- HAM-LET H6800 Series High Performance Ball Valves Catalog (2025)
- HAM-LET H-300U Integral-Bonnet Needle Valves Catalog (2025)
- HAM-LET H-400 Series Check Valves Catalog (2025)
- HAM-LET High Pressure (HHP) up to 60,000 psi Catalog (2025)
- UCT Fluid Solutions HM Extreme Ultra-Clean Metal Diaphragm Valves Catalog (2026)
- HAM-LET H-600 and H-600R T-Type & In-Line Filters Catalog (2025)
- HRG Clean Gas Pressure Regulators Catalog (2025)
