Hoffer Flow Controls (Hoffer Flow Control) Flowmeters & Electronics
Precision turbine, positive displacement, and cryogenic flowmeters from Hoffer Flow Controls (Hoffer Flow Control), paired with HIT-4 computers and spare calibrated internals.
HO Series: Precision Liquid & Gas Turbine Flowmeters
Hoffer Flow Controls HO Series inline turbine flowmeters measure clean liquids and gases across 1/4 to 12 inch pipe sizes. Liquid units span 0.0625 to 15,000 GPM at ±0.5% linearity, while gas units cover 0.15 to 12,000 ACFM. Field-replaceable rotor assemblies, bearings, and coils simplify upkeep.
- Liquid: 0.0625–15,000 GPM
- Gas: 0.15–12,000 ACFM
- Linearity: ±0.5% / ±0.1% rep.
- Parts: rotor kit, shaft, coils
Oil & Gas and Subsea: Wing Nut, API, CT & Subsea Series
Upstream and custody-transfer lines use Wing Nut meters rated to 15,000 psi, Grooved (4–12,000 GPM), Wafer, and Tri-Flo. API bladed and CT rimmed-rotor meters deliver ±0.25% and ±0.15% linearity. Custom Subsea meters operate to 15,000 ft depth using replaceable calibrated internals and coils.
- Wing Nut: 15,000 psi, 4–1,050 GPM
- API / CT: ±0.25% / ±0.15% lin.
- Subsea: depths up to 15,000 ft
- Spares: internals, wing nut seals
Cryogenic Turbine Meters & ICE Delivery Systems
Hoffer cryogenic turbine meters measure LN2, LOX, LAr, CO2, and LNG on bulk trailers and stationary process skids. Paired with Integrated Cryogenic Electronics (ICE), temperature/pressure sensors, and P6/P8/P9 printers, systems meet OIML R81 and Handbook 44. Cryo bearings and coils are replaceable.
- Media: LN2, LOX, LAr, CO2, LNG
- Compliance: OIML R81 & HB 44
- Electronics: ICE BLE & printers
- Parts: cryo bearings, pickup coils
Specialty Meters: MF, Sanitary, HHP, Autoclave & Teflon
Mini-Flowmeter MF series handles ultra-low flows from 0.007 to 3.5 GPM (liquid) and 0.005 to 1 ACFM (gas). Sanitary models cover 0.25 to 800 GPM, Teflon series serves corrosive fluids from 0.35 to 485 GPM, while HHP and Autoclave bodies reach 10,000 and 20,000 psi.
- MF: 0.007–3.5 GPM / 0.005–1 ACFM
- Sanitary: 1/4"–3", 0.25–800 GPM
- Teflon: 0.35–485 GPM corrosive
- HHP / Autoclave: up to 20,000 psi
Positive Displacement Meters: HRG1000 & H.O.G. Oval Gear
HRG1000 precision PD meters (HRG05 to HRG120) span 0.005 to 120 GPM at ±0.5% accuracy and 100:1 turndown across viscosities from 30 cSt up. Rated to 6,000 psi in 316L stainless steel (3,600 psi aluminum), units pair with HPDE and dual HPDE-D coils alongside H.O.G. oval gear meters.
- HRG1000: 0.005–120 GPM, 100:1
- Max pressure: 6,000 psi (316L)
- Viscosity: ≥30 cSt (H.O.G. ≥100)
- Pickups: HPDE / HPDE-D dual coil
Flow Computers & Indicators: HIT-4, HRT1, Nova-Flow & Flowstar
HIT-4U rate/totalizer indicators provide Modbus RTU, data logging, and 20-point linearization, while HIT-4L and HIT-4G add temperature/pressure and AGA-8 gas compensation. HRT1 adds HART 4–20 mA output, and Nova-Flow and Flowstar 2000–2007 handle batch and energy calculations.
- HIT-4U/L/G: Modbus, 20-pt lin.
- HRT1: HART & loop 4–20 mA
- Flowstar / Nova-Flow: batching
- Parts: CPU boards, LCD, Ex boxes
Signal Conditioners & Pickups: CAT1/2/3, PET & Pickup Coils
Microprocessor transmitters CAT1 (2-wire loop 4–20 mA), CAT2, and CAT3 (AC/DC with scaled pulse, analog output, and alarms) interface sensors to control loops. Explosion-proof PET-1/3/7 converters, PET-4/5/6 mag preamps, and magnetic, RF, or Redi-Pulse coils replace failed field electronics.
- CAT1/2/3: 4–20 mA, scaled pulse
- PET-1/3/7: analog converter Ex
- PET-4/5/6: square-wave mag preamp
- Coils: magnetic, RF, Redi-Pulse
Calibrated Internals Kits & ISO/IEC 17025 Calibration Services
Hoffer inline turbine meters are repaired in the field using spare calibrated internal kits (rotor, shaft, bearings, tube bundles) with NIST datasheets. The ISO/IEC 17025 and Z540-1 lab calibrates liquids to 1,525 GPM, air to 200 ACFM, and cryogenics to 200 GPM.
- Internals: rotor, shaft, bearings
- NIST-traceable calibration datasheet
- Lab: 1,525 GPM liquid, 200 ACFM air
- Field provers: CP20 & SY14B cryo
Selecting Hoffer Flow Controls (Hoffer Flow Control) Meters by Fluid & Pressure
Clean low-viscosity liquids and gases across 1/4" to 12" lines use HO Series inline turbine meters (±0.5% liquid, ±1% gas linearity) or MF mini-flowmeters down to 0.007 GPM.
Sanitary and Teflon bodies address pharma and corrosive media, while HRG1000 positive displacement meters (up to 6,000 psi in 316L) and H.O.G. oval gear meters serve fluids from 30 cSt and 100 cSt.
Oilfield, custody transfer, and offshore installations utilize 15,000 psi Wing Nut, Grooved, API/CT (±0.25% / ±0.15% linearity), and 15,000 ft Subsea configurations. Selecting the correct unit relies on fluid properties, min/max flow rate, operating pressure/temperature, and required signal output.
Electronics, Signal Conditioning, Cryogenic Systems & Spare Internals
Hoffer flowmeters pair with HIT-4U rate/totalizer indicators (Modbus, 20-point linearization), HIT-4L and HIT-4G AGA-8 compensated computers, HRT1 HART transmitters, Nova-Flow/Flowstar batch controllers, and CAT1/2/3 or PET-1..7 explosion-proof signal conditioners.
Cryogenic bulk delivery for LN2, LOX, LAr, CO2, and LNG integrates turbine meters with ICE electronics and P6/P8/P9 printers under OIML R81 and Handbook 44. Spare calibrated internal kits (rotor, shaft, bearings, tube bundles) ship with NIST-traceable datasheets for rapid field maintenance.
Hoffer Flow Controls and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hoffer Flow Controls and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Dataforth
- Equipment and parts for Instrument Technology / ITI
- Equipment and parts for ZPA Nová Paka
- Equipment and parts for Hansen Technologies
Documents and sources
- Hoffer Flow Controls — Turbine Flowmeters & Electronics Catalog
- Hoffer Flow Controls — Turbine Flowmeters Spare Internals and Parts
- Hoffer Flow Controls — Cryogenic Flow Meters & ICE Systems
- Hoffer Flow Controls — HRG1000 Precision PD Flow Meter
- Hoffer Flow Controls — ISO/IEC 17025 Flowmeter Calibration Services
- Hoffer Flow Controls — Product Selector & Applications
- Hoffer Flow Controls — Technical Manuals & Configuration Software
- Hoffer Flow Controls — Company History (1969, Elizabeth City, NC)
