ZOOK Enterprises (ZOOK) Rupture Disks, Holders & Explosion Vents

Engineering selection of ZOOK Enterprises (ZOOK) metal and impervious graphite rupture disks, pre-torque RAH/FAH holders, burst sensors, welded extrusion plugs, and CV explosion vent panels for industrial process safety.

Reverse-Acting Metal Rupture Disks (RA Series)

ZOOK reverse-acting metal rupture disks (RA4, RA6, RA8, RAX, RLP, SRA, URA) provide non-fragmenting protection up to 95% of burst min tolerance. Universal, scored, and non-scored designs deliver high cycle life. Units fit liquid, gas, and two-phase flow.

  • Series: RA4, RA6, RA8, RAX, RLP, SRA, URA
  • Operating ratio: up to 95% of burst min
  • Non-fragmenting scored & non-scored disks
  • Service: liquid, gas & two-phase media

Forward-Acting Metal Rupture Disks (D, FAX, PB)

ZOOK forward-acting metal rupture disks (D, ARD, FAX, FAC, SFAZ, FD, FDZ, PB, TA, and Double Disk) span composite, cross-scored, and low-pressure flange-mounted designs. Standard and exotic alloy foils withstand demanding thermal and chemical loads. Rated for gas, liquid, and two-phase flow.

  • Series: D, ARD, FAX, FAC, SFAZ, FD, FDZ, PB
  • Designs: composite, cross-scored & flat
  • Assemblies: TA brass & Double Disk units
  • Materials: standard & exotic metal alloys

Impervious Graphite Rupture Disks (Mono, Duplex)

ZOOK graphite rupture disks (Mono, Inverted, Duplex, FS-Inverted, FS-V Inverted, Two-Way, Insulated, RT2, RT2T, SD, RC, AC, TD) are machined from resin-impregnated impervious graphite. They resist alkalis, organic solvents, and most acids without moving parts. Compliant with ASME UD and PED.

  • Series: Mono, Inverted, Duplex, RT2, RT2T
  • Coatings: FS-Inverted fluoropolymer
  • Railcar & sanitary: RC, AC, TD, SD series
  • Compliance: ASME Code UD & PED 2014/68/EU

Sanitary Rupture Disks (ZANITARY ZAN / ZAN95)

The ZANITARY series (ZAN and ZAN95, 1" to 4" / 25 to 100 mm) uses solid 316L stainless steel or Hastelloy with a 4-20 Ra microinch finish and withstands full vacuum without a support. Operating ratios reach 95% (ZAN) and 100% (ZAN95) with CIP compatibility. Lab tested to 1,000,000+ cycles.

  • Models: ZAN (95% ratio) & ZAN95 (100%)
  • Sizes: 1"–4" (25–100 mm), 316L / Hastelloy
  • Finish: 4–20 Ra µin, ASME BPE SF4 & CIP
  • Standards: 3-A, ASME UD, PED, KOSHA, TÜV

Pre-Torque & Insert Rupture Disk Holders (RAH, FAH)

ZOOK pre-torque holders (FAH for FAC/FAX and RAH for RA4/RA6/RA8/RAX) allow bench pre-assembly prior to piping installation. Locating pins prevent reverse mounting, while flow arrows and coated cap screws simplify inspection. Insert, union, PTFE-sleeved, UHZ, RLPI, and URAI holders are available.

  • Pre-torque holders: RAH & FAH series
  • Insert & union: UHZ, RLPI, URAI, Screw-Type
  • Locating pin prevents incorrect disk fit
  • Fluoropolymer-coated socket cap screws

Burst Sensors & Alarm Monitors (BI, BA, RDI, ZAM Plus)

ZOOK burst sensors and indicators (BI, BA, RDI, sanitary RDI-S, non-invasive magnetic Z-Alert, Zensor, and ZAM Plus monitors) track disk opening and PRV protection. Units operate with metal or graphite disks or independently. Outputs support LDAR monitoring of VOC and HAP process emissions.

  • Sensors: BI, BA, RDI, RDI-S & Zensor
  • Magnetic non-invasive unit: Z-Alert
  • Surface-mounted monitor: ZAM Plus
  • Built for PRV protection & LDAR programs

Welded Extrusion & Downhole Burst Plugs (WEB, WDHT)

ZOOK welded extrusion burst plugs (WEB) and oil-tool downhole assemblies (WDHT) resist thermal stress without solder failure. Specs include a 0% manufacturing range, +/-10% burst tolerance (+/-1% typical SD), and optical thread verification. Every unit is 100% leak tested and ultrasonically cleaned.

  • Series: Extrusion Burst Plugs, WEB, WDHT
  • Tolerance: +/-10% burst, +/-1% typical SD
  • Range: 0% manufacturing range, welded tip
  • QC: 100% leak test & ultrasonic cleaning

Explosion Vent Panels (CV Series) & Relief Accessories

ZOOK explosion vents (flat CVF, CVIIF and domed CVP, CVIIP) come in single-layer, composite, and flameless designs to relieve deflagration without fragmentation. Accessories include UV-stabilized PVC PG pipe guard covers, graphite gaskets, and Tell-Tale indicators. Indicators meet ASME Section XIII.

  • Vent panels: flat CVF/CVIIF, domed CVP/CVIIP
  • Options: single-layer, composite & flameless
  • Tell-Tale: 1/4" MNPT x 1/8" FNPT indicator
  • Add-ons: PVC PG pipe guards & gaskets

Selecting ZOOK Enterprises (ZOOK) Rupture Disks & Holders

Reverse-acting metal disks (RA4, RA6, RA8, RAX, RLP, SRA, URA) operate up to 95% of minimum burst tolerance with non-fragmenting opening and pair with pre-torque RAH holders. Forward-acting D, FAX, FAC, and PB disks cover tension-loaded and low-pressure flange applications.

Impervious resin-impregnated graphite disks (Mono, Inverted, Duplex, FS-Inverted, RT2) resist alkalis, solvents, and most acids and bolt directly between standard flanges, while ZANITARY ZAN/ZAN95 disks serve sterile 3-A and ASME BPE lines.

Burst Detection, Extrusion Plugs & Explosion Venting

BI, BA, RDI, RDI-S, magnetic Z-Alert, and Zensor indicators connect to ZAM Plus alarm monitors to track disk rupture, safeguard relief valves, and support LDAR compliance alongside ASME Section XIII Tell-Tale indicators.

Welded WEB extrusion burst plugs and WDHT oil-tool assemblies operate with a 0% manufacturing range and +/-10% tolerance (+/-1% SD), while CVF, CVIIF, CVP, and CVIIP panels vent dust and gas deflagrations safely.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.