HO-Matic Pinch Valves (HO-Matic AG)
Swiss-made pneumatic pinch valves by HO-Matic AG (DN 06–150), replacement elastomer sleeves (NR, NBR, EPDM, FPM, CR, CSM), SEV/HO-Vac pneumatic controls, and diaphragm seals up to 300 bar for bulk, slurry, and hygienic plants.
Series 00 & 10 (POM & Aluminum)
Series 00 white POM plastic pinch valves cover DN 10–25 with G 3/8" to G 1" internal threads for compact dosing tasks. Series 10 uses anodized aluminum bodies in DN 15–32 (G 1/2" to G 1 1/4") for equipment engineering. Both maintain full-bore flow and accept replaceable elastomer sleeves.
- Series 00: DN 10–25 (POM)
- Series 10: DN 15–32 (Aluminum)
- Threads: G 3/8" to G 1 1/4"
- Wear part: elastomer sleeve
Series 20 & 21 (Square Body)
Square-shaped Series 20 threaded valves (G 1 1/4" and G 1 1/2", DN 32–40) and flanged Series 21 valves (DIN PN 10/16) target powder coating and bulk lines. The full-bore elastomer tube avoids clogging on dry pigments and granules. Maintenance replaces only the internal sleeve using standard tools.
- Series 20: G 1 1/4" – G 1 1/2"
- Series 21: DIN PN 10/16 flange
- Nominal sizes: DN 32–40
- Target: powder coating
Series 40, 41 & 48 (QSV Abrasive)
Patented Series 40 threaded valves (G 2" to G 3", DN 50–80) use the QSV bayonet lock for rapid sleeve replacement, while flanged Series 41 covers DN 50 to DN 150 under DIN PN 10/16 and Series 48 targets pharmaceutical duties. All three seal tightly around abrasive solids and powders.
- Series 40: DN 50–80 (QSV lock)
- Series 41: DN 50–150 (PN 10/16)
- Series 48: Pharma DN 50–80
- Duty: abrasive slurries
Series 50, 80 & 88 (Modular)
Heavy-duty Series 50 (G 1 1/2" to G 2 1/2", DN 40–65) handles large flow rates in industrial piping. Universal modular Series 80 (G 3/8" to G 2", DN 10–50) and Series 88 (Tri-Clamp 1/2"–2", DIN 32676 Series A) adapt to existing lines. Over 8,000 modular valve variants share standard spare sleeves.
- Series 50: DN 40–65 heavy-duty
- Series 80: DN 10–50 modular
- Series 88: Tri-Clamp 1/2"–2"
- Variants: 8,000+ modular
Series 60, 70 & 78 (Stainless Steel)
Stainless steel Series 60 (G 1/4", DN 06) covers micro-dosing, Series 70 (G 3/8"–G 2 1/2", DN 10–65) serves general hygiene, and Series 78 (Tri-Clamp 1/2"–2", DIN 32676 Series A) supports CIP/SIP lines. Dead-space-free flow and FDA-grade sleeves isolate media completely from metal actuators.
- Series 60: DN 06 miniature
- Series 70: DN 10–65 stainless
- Series 78: Tri-Clamp CIP/SIP
- Media contact: sleeve only
Replacement Elastomer Sleeves
The reinforced sleeve is the sole wear part, closing at 2–3 bar differential pressure. Grades cover NR (abrasives, +80/+90°C), NBR (oils, +80°C), EPDM (CIP/SIP +120°C, QSV +80°C), FPM (+100°C), CR, and CSM, plus FDA and conductive ATEX (-LE) options.
- Grades: NR, NBR, EPDM, FPM
- Special: CR, CSM, FDA, ATEX -LE
- Range: -20°C to +120°C
- Closing diff.: 2–3 bar
Pneumatic Controls, SEV & HO-Vac
Controls integrate Buschjost and ROSS 3/2 and 5/2 solenoid valves (24V DC, 230V AC, ATEX Zones 1/2/21/22), pressure switches (1–10 bar, 250V), and filter regulators. SEV quick exhaust valves boost DN 80+ or >3 m runs, while HO-Vac prevents collapse above 100 mbar vacuum.
- Solenoids: Buschjost & ROSS
- SEV: DN 80+ / lines >3 m
- HO-Vac: vacuum >100 mbar
- Air quality: ISO 8573-1
Diaphragm Seals & Custom Valves
Pipe and process diaphragm seals isolate gauges from abrasive or viscous streams across 0 to 300 bar, -20°C to +200°C, and Ø 5 to Ø 150 mm using an elastomer sleeve. Custom builds cover small batches with conductive POM-ELS or stainless housings, angular ports, and tailored face-to-face lengths.
- Pressure range: 0 to 300 bar
- Temperature: -20°C to +200°C
- Diameters: Ø 5 to Ø 150 mm
- Custom: POM-ELS & special lengths
Selection criteria for HO-Matic pneumatic pinch valves
Swiss-engineered HO-Matic AG pinch valves (founded in 1977) comply with Pressure Equipment Directive 2014/68/EU across DN 06 to DN 150. Full-bore, dead-space-free elastomer flow eliminates jamming and erosion in bulk solids, abrasive slurries, powders, and viscous pastes.
Selection matches body and connection style to duty: white POM Series 00 for compact dosing, aluminum Series 10, 20/21, 40/41, and 50 for powder coating and heavy conveying, and stainless steel Series 60, 70, and 78 (Tri-Clamp DIN 32676 Series A) for hygienic CIP/SIP plants.
Elastomer grades, operating limits, and pneumatic automation
Standard valves close leak-free up to approx. 5 bar media pressure with 2–3 bar differential air pressure (~7.5 bar control air at 5 bar media) across -20°C to +120°C (SIP up to 134°C). Elastomer sleeves in NR, NBR, EPDM, FPM, CR, and CSM include FDA and conductive ATEX (-LE) grades.
Complete control packages integrate Buschjost and ROSS 3/2-way and 5/2-way solenoid valves, quick exhaust valves (SEV) for DN 80+ or >3 m runs, HO-Vac vacuum support above 100 mbar negative pressure, pressure switches (1–10 bar), and diaphragm seals (0–300 bar, -20°C to +200°C).
HO-Matic and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of HO-Matic and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Hansen Technologies
- Equipment and parts for VIP Air Empowerment
- Equipment and parts for HONGFA
- Equipment and parts for Dataforth
Documents and sources
- HO-Matic — Pinch Valve Series Overview (00–88)
- HO-Matic — Replacement Sleeves & Elastomer Grades
- HO-Matic — Pneumatic Valve Controls, SEV & HO-Vac
- HO-Matic — Pipe & Process Diaphragm Seals (0–300 bar)
- HO-Matic — Custom Pinch Valves & POM-ELS Housings
- HO-Matic — Pinch Valve Advantages, Limitations & Selection
- HO-Matic — Company Profile & Swiss Manufacturing Since 1977
- HO-Matic — Product Range Overview
