DISCO Dicing Saws, Laser Saws and Wafer Grinders
DISCO equipment: DAD3350 and DFD6362 dicing saws, DFL7161 and DFL7362 laser saws, DFG8540 and DFG8640 grinders, DFP8160 dry polisher, DFM2800 wafer mounter and DAW4110 waterjet saw. Selection by specification.
DAD3350 and DAD3240 Automatic Dicing Saws
DAD3350 is an automatic dicing saw for wafers up to Φ8 inch or 250×250 mm workpieces. A 1.8 kW spindle is standard, and an optional 2.2 kW high-torque spindle handles ceramics. DAD3240 is a compact saw only 650 mm wide; it is discontinued, and DAD3241 is its successor.
- DAD3350 1.8 kW spindle: 6,000–60,000 rpm
- DAD3350 2.2 kW spindle: 3,000–30,000 rpm
- DAD3350 X cutting range: 260 mm
- DAD3240 machine width: 650 mm
DFD6362 Fully Automatic Dicing Saw
DFD6362 is a fully automatic dicing saw for Φ300 mm wafers with facing dual spindles. The optional ABC unit replaces the blade after breakage or at end of life and runs the precut, taking sixty seconds per blade. Throughput is about 7% higher than the previous model.
- DFD6362 wafers: Φ300 mm
- DFD6362 1.2 and 1.8 kW spindles: 6,000–60,000 rpm
- DFD6362 high-speed spindle: 20,000–80,000 rpm
- ABC blade change: 60 seconds
DFL7161 and DFL7362 Laser Saws
DFL7161 is a fully automatic ablation laser saw for Φ300 mm wafers: it applies HogoMax protective coating, dices and cleans the wafer. DFL7362 uses Stealth Dicing and singulates silicon 50 µm thick or thinner at high speed.
- DFL7161 method: ablation
- DFL7161 X-axis speed: 1–1,000 mm/s
- DFL7362 X-axis speed: 0.1–2,000 mm/s
- DFL7362 silicon: 50 µm or less
DFG8540, DFG8640 and DAG810 Grinders
DFG8540 and DFG8640 are fully automatic grinders with two spindles and three chuck tables for wafers up to Φ8 inch; DFG8540 thins wafers to 100 µm. Grinding wheels, spindles and chuck tables of the 800 series fit DFG8540. DAG810 is a compact grinder with one spindle and one chuck table.
- DFG8540 spindle: 4.2 kW, 1,000–7,000 rpm
- DFG8640 spindle: 6.0 kW, 9.5 N·m
- DFG8640 materials: Si, LT, LN, SiC
- DAG810 wheel: Φ200 mm diamond
DFP8160 Dry Polisher and DAS8930 Surface Planer
DFP8160 removes the grinding damage layer from the backside of wafers up to Φ300 mm without slurry, reducing breakage and warpage. DAS8930 is a surface planer that uses a diamond bit to planarize metals, resins and their composites on Φ300 mm wafers.
- DFP8160 spindle: 7.5 kW, 1,000–3,000 rpm
- DFP8160 wheel: Φ450 mm dry polishing
- DAS8930 TTV: less than 3.0 µm
- DAS8930 roughness: within Ra 0.02 µm
DFM2800 Wafer Mounter and DDS2300 Die Separator
DFM2800 works inline with DGP8761: it mounts thinned Φ300 mm wafers onto dicing tape and tape frames, peels the protective tape and handles wafers thinner than 25 µm. DDS2300 cleaves DAF by cool expansion, then removes tape sag by heat shrinking.
- DFM2800 wafers: under 25 µm thick
- DFM2800 attachment: ±0.5 mm X/Y
- DDS2300 cooler stage: 0 or −5 °C
- DDS2300 hot air: 200, 220, 250 °C
DAW4110 Automatic WaterJet Saw
DAW4110 cuts workpieces with pressurized water and abrasive without heat, following contours from input data with auto alignment. A 0.3 mm kerf allows inner corners with 0.3 mm radius. It suits resins, metals and laminated materials and also cuts titanium and stainless steel.
- DAW4110 pump pressure: 67 MPa
- DAW4110 kerf width: 0.3 mm
- DAW4110 workpiece: 220×190×5 mm
- DAW4110 cutting speed: 0.1–30 mm/s
ZH05 Dicing Blades and Poligrind Grinding Wheels
ZH05 are electroformed bond hub blades for silicon, GaAs, GaP and LiTaO3 wafers with five levels of diamond grit concentration. A concentration of 100 means 25% diamond grit by volume. Poligrind runs on the second spindle of in-feed grinders and lowers roughness after thinning.
- ZH05 concentration: 5 levels
- Concentration 100: 25% diamond
- Poligrind test result: Ra 0.009 µm
- Poligrind position: second spindle
Selecting DISCO Machines by Process
For blade dicing there are DAD3350 automatic saws for wafers up to Φ8 inch and DFD6362 fully automatic saws for Φ300 mm wafers with facing dual spindles.
For laser dicing there is DFL7161 with ablation and HogoMax protective coating, and DFL7362 with Stealth Dicing for silicon 50 µm thick or thinner.
For wafer thinning there are DFG8540 and DFG8640 grinders with two spindles and three chuck tables, and the compact DAG810. DFP8160 dry polishing removes the grinding damage layer, DAS8930 planarizes metals and resins, and the DAW4110 waterjet saw cuts contours without heat.
Thinning Line: Grinding, Mounting, Separation
DFM2800 works inline with the DGP8761 grinder: it mounts thinned Φ300 mm wafers onto dicing tape and tape frames and peels the protective tape, including wafers thinner than 25 µm. Wafer attachment accuracy in X/Y is ±0.5 mm.
DDS2300 cleaves DAF by cool expansion at 0 or −5 °C, then removes tape sag with hot air so the frame goes on to die bonding. ZH05 dicing blades and Poligrind wheels are selected for the material and process.
DISCO Company
DISCO CORPORATION was founded on May 5, 1937 in Kure, Hiroshima Prefecture, as Dai-Ichi Seitosho, making abrasive wheels. In 1970 it released its first DAS/DAD machines, and it has carried the name DISCO CORPORATION since 1988.
The head office and R&D center are in Ota-ku, Tokyo. The company makes precision cutting, grinding and polishing machines, provides their maintenance and operator training, and produces diamond tools: dicing blades and grinding wheels.
DISCO and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of DISCO and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Veeco
- Equipment and parts for Onto Innovation
- Equipment and parts for Axcelis Technologies
- Equipment and parts for Mitsui High-tec
- Equipment and parts for Entegris
Documents and sources
- Corporate outline — founding and business
- Corporate history — since 1937
- After-sales service — machine support
- Discontinued machines — parts supply
- Equipment troubleshooting — checks
- DAD3350 dicing saw — specifications
- DAD3240 dicing saw — specifications
- DFD6362 dicing saw — specifications
- DFL7161 laser saw — specifications
- DFL7362 laser saw — specifications
- DFG8540 grinder — specifications
- DFG8640 grinder — specifications
- DAG810 grinder — specifications
- DFP8160 polisher — specifications
- DAS8930 surface planer — specifications
- DFM2800 wafer mounter — specifications
- DDS2300 die separator — specifications
- DAW4110 waterjet saw — specifications
- ZH05 blades — grit concentration
- Poligrind wheels — wafer grinding
