Mitsui High-tec Surface Grinders and Precision Dies
Mitsui High-tec machines and tooling: MSG-200M hand feed grinders, PC-NC and MSG-S500-R' CNC grinders, MSG-618CNC precision grinders, motor core dies and the MAC system. Selection by specification.
MSG-200M and MSG-250M Hand Feed Surface Grinders
MSG-200M is a manual surface grinder with 11,000 units sold; the US range lists MSG-200MH, MSG-205MH and MSG-250M. On MSG-200MH the carriage runs on two 45° V-ways, the table on linear ball bearings, and the cartridge spindle is removable. Iron parts use Japanese Meehanite metal.
- MSG-200M: 11,000 units sold
- MSG-200MH: 6×13-1/2 in table
- MSG-200MH spindle: 2,900/3,460 rpm
- Right angle of travels: 0.002/200 mm
PC-NC and MSG-S500-R' CNC Surface Grinders
The PC-NC series covers servo driven MSG-818PC-NC and MSG-525PC-NC and linear motor NCL versions with Surface, G-Code, Pitch and Creep modes. MSG-618/818PC-NC run Mitsui software on a Windows PC. MSG-S500-R' is a 5-axis grinder, HPR-PCNCF-R' a compact multifunction one.
- PC-NC spindle: 500–4,000 rpm
- MSG-818PC-NC: 8×19 in table
- PC-NC option: 5-axis index device
- MSG-S500-R': two rotary axes
MSG-618CNC, MSG-46CNC and MSG-135HG Precision Grinders
MSG-618CNC-HS is a CNC grinder with a hydrostatic longitudinal guide, linear motor drive, air bearing spindle and a 240 liter coolant tank with temperature control. MSG-46CNC-B grinds punches, and MSG-135HG is a large ultra precision surface grinder. Slideways are finished by scraping.
- MSG-618CNC-HS: 240 l coolant tank
- MSG-46CNC-B: 200 SPM at 20 mm stroke
- Scraping: 2 µm per 100 mm
- MSG-618CNC-HS: air bearing spindle
Spindles: Noise, Vibration and Runout
For a standard bearing spindle the manufacturer sets limits of 60 dB noise in a 30–40 dB room and 3.1 µm P-P vibration amplitude. The limits apply to spindles with tip runout under 3 µm. Machine accuracy follows JIS B 6213; spindle motor noise is diagnosed after return to the maker.
- Spindle noise limit: 60 dB
- Vibration P-P limit: 3.1 µm
- Spindle tip runout: under 3 µm
- Machine accuracy: JIS B 6213
Motor Core Dies and Precision Tooling
Mitsui High-tec builds dies for EPS, air conditioner and robot motor cores; for EV drive motors it supplies finished cores. Other dies serve battery parts, medical parts and coins. Die parts are made to drawing dimensions, so a broken die is restored by replacing the part.
- Dies: EPS and robot motor cores
- Die parts made to drawing size
- 1974 high speed die: 5× punching
- EV drive motors: finished cores
MAC System and Motor Cores
MAC (Mitsui Automatic Core assembly), developed in 1974, punches, measures, stacks and interlocks the core inside one die. Stacking under hydraulic cylinder back pressure suits large diameter cores and thin sheet. In 2000 the MAC process reached micro cores 2.7 mm in diameter.
- Large cores: Ø200 mm and above
- Thin sheet: 0.3 mm
- Micro core: 2.7 mm diameter
- Stacking: hydraulic back pressure
Selecting Mitsui High-tec Surface Grinders
For tool rooms with manual work there are M series hand feed surface grinders: MSG-200M, MSG-200MH, MSG-205MH and MSG-250M. For programmed production grinding there is the PC-NC series: servo driven MSG-818PC-NC and MSG-525PC-NC and linear motor NCL versions including MSG-300PC-NCL.
For 5-axis work in one chucking there is MSG-S500-R' with two rotary axes, for punches MSG-46CNC-B, and for ultra precision work MSG-618CNC-HS and the large MSG-135HG. Mitsui High-tec machine tools are first developed for the company's own die production.
Dies, MAC System and Motor Cores
Mitsui High-tec builds precision dies for EPS, air conditioner and robot motor cores, and dies for automotive battery parts, medical parts and coins. Die parts are made to drawing dimensions, so no fitting on site is needed.
For EV drive motors and leadframes the company supplies finished products rather than dies.
The MAC system punches, measures, stacks and interlocks the core inside one die. Besides interlocking, the company punches cores from adhesive coated electrical steel, and Magnet Mold technology fixes rotor magnets with thermosetting epoxy resin.
Mitsui High-tec Company
Mitsui High-tec, Inc. was founded in 1949 in Kitakyushu, Fukuoka, as a die shop. Its first in-house surface grinder was built in 1950, and from 1966 the grinders were produced in series and sold to other users. The company has carried its current name since 1984.
Its businesses are dies and precision parts, surface grinders, leadframes for QFN, QFP/SOP and power packages, and motor cores. Leadframes are made by stamping and by etching.
Mitsui High-tec and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Mitsui High-tec and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Shibaura Machine
- Equipment and parts for Nakamura-Tome
- Equipment and parts for Okuma
- Equipment and parts for Yamazaki Mazak
Documents and sources
- Home page — company overview
- Company profile — name and address
- History — since 1949
- Machine tools — grinder lineup
- Machine terms — accuracy, noise, vibration
- Spindle noise and vibration measurement
- Consumable parts list — machine tools
- Precision tooling — lineup
- Motor cores — technology
- Leadframes — lineup
- MSG-200MH — construction
- MSG-200MH brochure — specifications
- PC-NC grinders — PC software
- PC-NC brochure — specifications
- MSG-618CNC — design
- MSG-46CNC — punch grinding
