ZMM Yakoruda Woodworking Machinery & Band Saws
Equipment sourcing and spare parts selection for ZMM Yakoruda K5, KAD, FC 400, FU, AU, TU, BA 200 woodworking machines and BS 260 DG miter band saws by model and serial plate.
Combined 5-Operation Machines K5 260, K5 320, K5 400
The K5 series (K5 260, K5 320, K5 400) integrates five woodworking operations with an 86 mm 3-knife cutter block at 5200 rpm, a 300 mm circular saw at 3700 rpm, and a 3000/6000 rpm spindle moulder. Three induction motors drive the units with safety interlocks.
- Planing width 260 / 320 / 400 mm; table up to 1920 mm
- Saw Ø300 mm (cut 85 mm); mortiser drill up to 16 mm
- Thicknesser 8 m/min feed; max workpiece 180 / 220 mm
- Net weight 450–600 kg; IP-54 electrical protection
Planer-Thicknessers KAD and KAD B2 (260, 320, 400)
KAD 260, KAD 320, and KAD 400 planer-thicknessers (plus B2 versions with a 16 mm mortiser) provide 260 to 400 mm planing width, 180 or 220 mm thicknessing height, and 8 m/min feed speed. The 3-knife 86 mm cutter block runs at 5200 rpm above milled iron tables.
- Planer tables 1560×260/320 or 1920×400 mm; cut 4 mm
- Two independent motors 1.5–3.0 kW; 90°–45° fence
- B2 mortiser: 100/150 mm strokes, 5200 rpm drill
- Feed disengagement without stopping the main motor
Spindle Moulder-Circular Saw FC 400
The FC 400 combines a 300 mm circular saw unit (3700 rpm, 85 mm max cut) and a vertical spindle moulder (6000 rpm, optional 3000/6000 rpm) on an 850×850 mm work table. Its iron tenoning carriage measures 450×750 mm on steel guides.
- Spindle diameter 30 mm (32/50 optional); 130 mm travel
- Max milling tool Ø170 mm; table opening Ø190 mm
- Motors: 2.2 kW circular saw and 2.2/3.0 kW moulder
- Dimensions 1600×860×1100 mm; net weight 310 kg
Woodworking Spindle Moulders FU 250 and FU 400
The FU 250 and FU 400 handle profiling and tenoning with a heavy iron table, electronic rpm readout, and a 450×750 mm tenoning carriage. FU 250 runs at 3000/4500/6000/9000 rpm (3.2/4.0 kW), while FU 400 operates at 6000 rpm with a 2.2 kW motor.
- Tables: 1000×700 mm (FU 250) and 850×850 mm (FU 400)
- Spindle travel 160 mm / 130 mm; bore Ø30/32/50 mm
- Max cutter diameter 250 mm (FU 250) / 170 mm (FU 400)
- FU 250 net weight 450 kg; table opening Ø250 mm
Surface Planers AU 260, AU 320, AU 400, and AU 401
The AU surface planer range spans 260 to 400 mm widths with ground iron tables from 1650 to 2500 mm long and 90°–45° tilting aluminum fences. Models AU 260–400 use an 86 mm 3-knife cutter block (5200 rpm), while heavy-duty AU 401 uses a 110 mm 4-knife block.
- Table sizes: 1650×260/320, 1920×400, 2500×400 mm
- Max cut depth 4 mm (AU 260–400) and 6 mm (AU 401)
- Motor ratings 2.2 / 3.0 kW and 4.0 kW on AU 401
- 5200 rpm cutter block with hinged safety guard
Thicknessers TU 260, TU 320, and TU 400
The TU 260, TU 320, and TU 400 thicknessers machine workpieces up to 180 or 220 mm thick at 8 m/min feed speed with 3 mm max cut depth. Their low-friction tables run on four guide rods with a central column, digital height readout, and chain-driven rollers.
- Tables 550×260/320 mm and 690×400 mm; 3 knives
- 5200 rpm cutter block; 2.2 kW (260/320) or 3.0 kW (400)
- Rubber-coated outfeed roller and chain infeed drive
- Options: spare knives, magnetic knife gauge, 220 V motor
Pneumatic Mortiser BA 200 / LBM 200 A
The BA 200 / LBM 200 A is a pneumatic-driven mortiser featuring pneumatic boring head rotation with fixed locking positions at 90°, 45°, and 0°. It provides 200 mm longitudinal, traverse, and vertical strokes and a 5200 rpm drill spindle.
- Working table 400×250 mm (500 mm option) on iron base
- Max drill diameter 16 mm at 5200 rpm spindle speed
- 200×200×200 mm 3-axis travel for deep slot mortising
- Pneumatic head indexing at 0°, 45°, and 90°
Manual Miter Band Saw Cutting Machine BS 260 DG
The BS 260 DG cuts circular, square, and rectangular metal profiles at 90°, 45°, and 30° miter angles with manual frame lifting and clamping. It runs a 3200×27×0.9 mm blade at 40 (80) m/min with an integrated 35-liter coolant system.
- 90° capacity: Ø260 mm round, 250×250 square, 290×180 mm
- 45° capacity Ø200 / 200×150 mm; 30° Ø140 / 140×100 mm
- Drive 1.1 kW (1.5 kW optional); coolant pump 0.18 kW, 35 L
- Blade 3200×27×0.9 mm; net machine weight 500 kg
Architecture Across ZMM Yakoruda Machine Series
ZMM Yakoruda produces both space-saving multi-operation woodworking machines—the 5-operation K5 260, K5 320, and K5 400 (with three independent induction motors and safety interlocks) and KAD / KAD B2 planer-thicknessers—and standalone production units including AU surface planers, TU thicknessers, FU spindle moulders, the FC 400 saw-moulder, and the BA 200 / LBM 200 A pneumatic mortiser.
Woodworking beds are built from ground grey iron for geometric stability, scaling up to the 2500×400 mm table and 110 mm 4-knife cutter block on the AU 401. For metal profile cutting, the lineup includes the BS 260 DG manual miter band saw with a 3200×27×0.9 mm blade and 35-liter coolant system.
Distinguishing ZMM Yakoruda from Other Bulgarian ZMM Plants
ZMM – Yakoruda, PLC specializes in woodworking equipment and the BS 260 DG band saw.
Metal-cutting universal and CNC engine lathes (CU and CT series) are manufactured by separate Bulgarian plants ZMM Bulgaria (Sliven) and ZMM Vratsa, while sliding-table saws and edgebanders belong to ZMM Stomana / Nikmann (Silistra).
ZMM Yakoruda and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ZMM Yakoruda and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ZMM Stomana / Nikmann
- Equipment and parts for ZMM Vratsa
- Equipment and parts for ZMM Bulgaria / ZMM Sliven
- Equipment and parts for WMW AG
Documents and sources
- ZMM Yakoruda manufacturer catalog at export partner EIM Trade
- Combined 5-way processing machine K5 260 specification
- Combined 5-way processing machine K5 320 specification
- Combined 5-way processing machine K5 400 specification
- Planer-thicknesser KAD 260 specification
- Planer-thicknesser KAD 320 B2 specification
- Planer-thicknesser KAD 400 specification
- Spindle moulder-circular saw FC 400 specification
- Spindle moulder FU 250 specification
- Spindle moulder FU 400 specification
- Surface planer AU 320 specification
- Surface planer AU 401 specification
- Thicknesser TU 320 specification
- Mortiser BA 200 / LBM 200 A specification
- Manual miter band saw BS 260 DG specification
- EIM Trade spare parts request portal for ZMM Yakoruda
