ZMM Bulgaria / ZMM Sliven Metal-Cutting Lathes

Universal, variable-speed, CNC, cycle, and oil country lathes from ZMM Bulgaria / ZMM Sliven for general machining and pipe threading. Center heights 165–705 mm, DBC up to 10,000 mm, plus tooling and spare assemblies.

Universal Lathes CU and C

ZMM Bulgaria / ZMM Sliven models include CU 325, C400TM, CU400M, CU500M, C11MC, CU500MT, CU630, CU730, C10TM/TH/TB, CU800, CU1000, and CU1250. Every lathe cuts metric, inch, module, and diametral pitch threads. Replacement gears, shafts, and aprons match model revisions.

  • Center height: 165 to 625 mm
  • Swing over bed: 325 to 1320 mm
  • Bed width: 200 to 700 mm
  • DBC: 500 to 6000 mm (up to 10,000 mm)

Variable Speed Lathes RD and S

ZMM Bulgaria / ZMM Sliven models span CU325RD, C400TS, CU400MRD, CU500MRD, CU580MRD, C11MCS, CU630RD, CU730RD, C10TS/TMS/THS, CU800RD–CU1250RD, and CU1410RD. Frequency inverters keep continuous cutting speed V-const. Optional DROs and spindle drives fit exact builds.

  • Inverter V-const speed control
  • CU1410RD swing over bed: 1410 mm
  • CU1410RD bed width: 800 mm
  • DBC: 500 up to 10,000 mm

CNC Lathes LT, LCC, and LTC

ZMM Bulgaria / ZMM Sliven CNC models include LT580, LT660, LT760, LT860, LTC10T.10, LTC10T.12, LT800, LT1000, LT1250, LCC800, LCC1000, and LCC1250. Systems run Siemens, Fanuc, Fagor, or Heidenhain controls. Ballscrews, servos, and encoders match serial builds.

  • Controls: Siemens, Fanuc, Fagor, Heidenhain
  • Swing over bed: 580 to 1320 mm
  • Center height: 290 to 635 mm
  • DBC: 885 to 6000 mm

Oil Country Lathes C10T and C11T

ZMM Bulgaria / ZMM Sliven oil country lathes cover C11T.6, C10T.10, C10T.12, and C10T.14 for pipe diameters up to 14 inches. Dual chucks and steady rests support internal and external cylindrical or taper threading. Taper attachments and heavy spindles stay serviceable.

  • Pipe diameter capacity: up to 14 inches
  • Center height: 365 to 510 mm
  • Swing over bed: 730 to 1020 mm
  • DBC: 1500 to 6000 mm

Cycle Lathes LS 600 M

The LS 600 M cycle lathe from ZMM Bulgaria / ZMM Sliven bridges manual toolroom machines and full CNC turning centers. Operators run handwheels manually or use electronic cycle assistance without G-code. Feed drives, sensors, and mechanical parts match factory builds.

  • LS 600 M center height: 300 mm
  • Swing over bed / slide: 600 / 400 mm
  • Bed width: 400 mm
  • DBC: 1000, 1500, and 2000 mm

Accessories, Boring Bars, and Parts

ZMM Bulgaria / ZMM Sliven tooling covers 3-jaw and 4-jaw BISON chucks, faceplates, steady rests, and boring bar holders. Taper attachments, thread dials, and sleeves fit standard series. ZMM Nova Zagora, IHB Metal Castings, and IHB Electric build gears, iron beds, and motors.

  • 3-jaw / 4-jaw chucks and faceplates
  • Flat or rolling quill steady rests
  • Cross-slide and rear-support boring bars
  • Gears and parts by machine revision

ZMM Bulgaria / ZMM Sliven Manufacturing Base and Series Selection

ZMM - Bulgaria Holding EAD builds universal, variable-speed, cycle, oil country, and CNC lathes at ZMM Sliven AD, backed by in-house gear production at ZMM Nova Zagora AD and grey and ductile iron foundry capacity at IHB Metal Castings EAD.

Over 115,000 lathes have been delivered across more than 80 countries.

Toolrooms and repair workshops rely on CU 325 to CU1250 manual lathes or RD/S inverter-driven machines with constant cutting speed V-const.

Energy and pipeline shops select C10T and C11T oil country lathes for pipe threading up to 14 inches, while serial lines run LT, LCC, and LTC CNC lathes or the LS 600 M teachable cycle machine.

Configuration Parameters, Tooling, and Spare Assemblies

Specification for ZMM Bulgaria / ZMM Sliven equipment defines center height (165 to 705 mm), swing over bed (325 to 1410 mm), distance between centers (500 to 10,000 mm), bed width (200 to 800 mm), and required thread standards across metric, inch, module, and diametral pitch ranges.

Available tooling covers 3-jaw self-centering and 4-jaw independent chucks including BISON, faceplates, flat or rolling quill steady rests, follow rests, taper turning attachments, thread chasing dials, and boring bar holders bolted to the cross slide or reinforced with a rear support.

ZMM Bulgaria / ZMM Sliven and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ZMM Bulgaria / ZMM Sliven and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.