ZMM Vratsa Metal-Cutting Lathes, Shapers & Grinders

Universal center lathes CU402–CU1332, oil-country tube lathes CT, CNC C832C–C1132C, cyclic TBA, HC 632 shaper, and RRB 200 grinder from ZMM Vratsa. DBC up to 6000 mm, chucks, and gears.

Universal Lathes CU402–CU1022

ZMM Vratsa universal center lathes include CU402, CU502, CU582, CU662, CU802, CU822, CU902, CU922, CU1002, and CU1022. Each machine cuts 288 metric, inch, module, and DP threads with 144 feeds. Replacement gears, clutches, and leadscrews match unit specs.

  • Center height: 210 to 517 mm
  • Swing over bed: 420 to 1030 mm
  • Bed width: 400 or 480 mm
  • DBC: 1000–6000 mm (18 speeds)

Heavy-Duty Lathes CU832–CU1332

Heavy universal ZMM Vratsa lathes cover CU832, CU932, CU1032, CU1132, CU1232, and CU1332 for large shafts and rotors. Their 560 mm wide bed supports high cutting loads across long workpieces. Spindle bearings, apron gears, and clutches are sourced by model.

  • Center height: 417 to 667 mm
  • Swing over bed: 830 to 1330 mm
  • Swing over carriage: 510 to 1010 mm
  • Bed width: 560 mm, DBC up to 6000 mm

Tube Lathes CT Series

ZMM Vratsa oil-country tube lathes cover CT832.6–CT1132.6, CT832.8, CT832.10, CT832.12, CT932.14, CT1032.10, and CT1032.12. Large spindle bores up to 260 mm and 12 speeds (8–400 rpm) handle heavy pipes. Chucks, rests, and gear trains match each bore size.

  • Tube capacity: 6, 8, 10, 12, and 14 inch
  • Swing over bed: 830 to 1030 mm
  • CT832.10 spindle bore: 260 mm
  • Drive: 15 / 18.5 kW, 160 feeds, 320 threads

CNC, Cyclic & Variable-Speed Lathes

ZMM Vratsa CNC lathes C832C–C1132C and tube CNC C832C.5–C932C.14 run Fanuc 0i Mate-TD, Siemens Sinumerik 802D sl, or Fagor 8055i controls. Cyclic TBA660/TBA830 and CU802RD cover 15–2000 rpm. Turrets, servo drives, and spindle parts match each build.

  • CNC C832C–C1132C: 830–1130 mm swing
  • Tube CNC bore: up to 260 / 315 mm
  • Turrets: Baruffaldi TAN 210 / Duplomatic
  • CU802RD / TBA: 15–2000 rpm, 11–15 kW

Shaping Machine HC 632

The ZMM Vratsa HC 632 horizontal shaper machines flat, vertical, inclined surfaces, and slots up to 630 mm long. Its 630x400x400 mm table delivers 710 mm horizontal travel and 8 ram speeds (10–112 strokes/min). Ram gears, link blocks, and feed parts are supplied.

  • Max machined length: 630 mm
  • Table: 630x400x400 mm (710 mm stroke)
  • Slider speeds: 8 steps, 10–112 stroke/min
  • Main motor: 4 kW, machine weight 1800 kg

Surface Grinding Machine RRB 200

The ZMM Vratsa RRB 200 surface grinder achieves 0.02 mm positioning accuracy for parts up to 200 mm high (140 mm on magnetic chuck). Its 200x80x78 mm grinding wheel runs at 2830 rpm driven by a 1.5 kW motor. Wheel spindle bearings and coolant pumps match factory specs.

  • Working table: 440x185 mm (magnet 250x125)
  • Grinding wheel: 200x80x78 mm (2830 rpm)
  • Positioning accuracy: 0.02 mm
  • Motor: 1.5 kW (2800 rpm), weight 550 kg

Accessories: Rests, Chucks & Tapers

ZMM Vratsa factory accessories cover steady rests, follow rests, four-jaw independent chucks for DIN 55027 and ASA B5.9 spindle noses, and faceplates. Taper turning attachments (340 mm stroke, ±10°), 2-speed tailstock quills, drive plates, and thread dials are supported.

  • Steady rests: 10–230 to 400–600 mm
  • Follower rest capacity: 10 to 210 mm
  • 4-jaw chucks: 400, 500, 600, 760 mm
  • Taper attachment: 340 mm drive, ±10 deg

Gear Wheels, Shafts & Assemblies

ZMM Vratsa produces replacement mechanical components for headstocks, feed boxes, and aprons: straight and helical gears, bevel and worm wheels, gear racks, sprockets, shafts, and gear clusters. Bushings and wear parts are machined from steel, iron, and non-ferrous alloys.

  • Cylindrical gears: module 1–6 (DIN 3961)
  • Bevel / worm gears: m 1–8 / 1–6 (Dmax 600)
  • Gear racks: m 1–6, Lmax 600 mm (60x60)
  • Shafts & clusters: Dmax 150, Lmax 1500 mm

ZMM Vratsa Product Range and Factory Capabilities

Founded in 1964 in Vratsa, Bulgaria, ZMM Vratsa Plc manufactures universal center lathes CU402–CU1332 covering swing-over-bed diameters from 420 to 1330 mm and distances between centers up to 6000 mm, exporting roughly 95% of its output to over 60 countries.

For oilfield and pipe work (6 to 14 inches), the factory builds CT-series tube lathes and C832C.5–C932C.14 tube CNC models with spindle bores up to 315 mm. CNC lathes C832C–C1132C (Fanuc, Siemens, Fagor), cyclic TBA660/TBA830, the HC 632 shaper, and the RRB 200 surface grinder complete the range.

Configuration Parameters, Tooling, and Spare Assemblies

Equipment selection for ZMM Vratsa specifies center height (210 to 667 mm), bed width (400, 480, or 560 mm), distance between centers, spindle nose (DIN 55027 No.8/11/15 or ASA B5.9), thread standards (metric, inch, module, DP), CE execution, digital readout, and pedal brake options.

Factory accessories include steady rests (10–600 mm), follower rests (10–210 mm), four-jaw independent chucks (400–760 mm), 480 mm faceplates, taper attachments (340 mm, ±10°), and precision cylindrical, bevel, and worm gears, racks, shafts, and gear clusters.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.