WMW AG Machine Tools & Retrofit Equipment

Used and retrofitted metalworking machine tools from WMW AG Leipzig (WMW-Niles, Heckert, Mikromat, Union, Gotha): 700+ machines on site, custom CNC retrofits, and industrial plants.

Conventional and CNC lathes

Conventional and CNC lathes including WMW-Niles DLZ 1200, Niles-Zerbst DLZ 630III, WMW Mikromat DZFG 200x500, and WMW P 48 handle shafts up to 1200 mm swing. The catalog covers 63 units with CNC, cycle, and manual controls. We source spindle bearings, leadscrews, toolposts, and clutches.

  • Swing over bed: 315–1200 mm
  • Turning length: 500–3200 mm
  • Over support: 200–800 mm
  • 63 lathe units listed

Milling and gear hobbing machines

Horizontal mills WMW FW 400 V and FH alongside vertical gear hobbers WMW Heckert ZFWVG 250x2000/3 and 250/4x1250 machine housings and gears up to 500 mm. The group spans 41 bed, portal, and universal mills. Replacement ballscrews, milling heads, index gears, and hydraulic valves are supported.

  • WMW FW 400 V travel: 1000×350×400 mm
  • Workpiece dia.: up to 500 mm
  • Center height: 260 mm
  • 41 milling machines in line

Boring mills and machining centers

Table-type borers Union BFKF 110 Bohrwerk, Stanko-WMW NS3A rotary tables, and WMW BS40 column drills serve heavy machining. The catalog lists 77 boring mills and machining centers. Support covers quills, spindle bearings, table drives, and clamping units.

  • Boring & centers: 77 units
  • Rotary table: Stanko-WMW NS3A
  • Table borer: Union BFKF 110
  • Column drill: WMW BS40

Grinding and honing machines

Internal CNC grinders such as WEMA Glauchau SI 3 CNC x 150 and 66 surface, cylindrical, and honing machines deliver precision finishing of hardened bores and shafts. WMW AG reconditions guideways and spindle geometry. Replacement grinding spindles, wheel dressers, and hydraulic pumps are available.

  • 66 grinding & honing units
  • WEMA Glauchau SI 3 CNC x 150
  • Internal & surface finishing
  • Guideway reconditioning

Sheet metal machines and presses

Sheet straighteners WMW Gotha UBR 16x2500/1-10 and UBR 4x1250, eccentric presses WMW PEDH 160, and Beyeler 4100x16 shears process heavy plate. The catalog holds 70 sheet metal units and 47 presses. Wear parts include rolls, shear blades, cylinders, and clutch-brakes.

  • Sheet metal units: 70
  • Presses: 47 units (PEDH 160)
  • Plate capacity: up to 16×2500 mm
  • Load-cell press force checks

Saws, threading and planing machines

Cold saws WMW SGK 630 and band saws like Kasto SBA 260/400 U and Jaespa W320-AZ up to 320 mm cut bar stock. The group covers 24 saws alongside threading, planing, and slotting machines. Blade guides, worm gearboxes, hydraulic vises, and coolant pumps are supported.

  • 24 sawing machines listed
  • Cutting capacity: up to 320 mm
  • Saw band length: up to 5320 mm
  • Cold saw: WMW SGK 630

Measuring equipment and accessories

CMMs such as Zett Mess Technik MP1-10-B CNC 3D (870×870×800 mm), Mitutoyo Crysta-Plus 544, and Trimos VT 600 height gauges verify part geometry. This line lists 17 metrology systems and 187 accessories. Probe heads, linear encoders, steady rests, and vises are sourced.

  • 187 machine accessory items
  • 17 measuring systems listed
  • CMM MP1-10-B: 870×870×800 mm
  • Mitutoyo & Trimos metrology

CNC retrofit, overhaul and industrial plants

At Leipzig halls with 64-ton cranes and 700+ machines, WMW AG runs overhauls, CNC retrofits, and turnkey plants like Jehmlich Record BT-EX 2.5 t mills. Geometry uses Renishaw XL80 and QC20-w checks. Control cabinets, servo drives, sensors, and guards are supported.

  • Crane capacity: up to 64 tons
  • On-site inventory: 700+ units
  • Renishaw XL80 & QC20-w checks
  • ISO 9001 process standards

WMW AG Leipzig Heritage and 700+ Machine Inventory

Headquartered at Messe-Allee 10a in Leipzig, Germany, WMW AG emerged after German reunification from the former VVB Werkzeugmaschinen und Werkzeuge (WMW) industrial group and has operated for more than 25 years as an international specialist for used and retrofitted machine tools.

Its production and warehouse halls feature crane capacities up to 64 tons and hold a continuous selection of over 700 machines, spanning 77 boring mills and machining centers, 63 lathes, 41 milling machines, 66 grinders, 47 presses, and 70 sheet metal working machines.

Custom CNC Retrofits and Precision Metrology

In addition to ready-to-ship used equipment, WMW AG runs an in-house mechanical engineering division for full machine overhauls, guideway regrinding, spindle refurbishment, electrical cabinet replacement, and custom CNC retrofits compliant with current industrial safety standards.

Machine accuracy is verified with Renishaw XL80 laser interferometers and QC20-w circularity testers, while hydraulic and mechanical presses are checked with load cells under ISO 9001 quality management processes.

Equipment Selection from Lathes to Complete Plants

Buyers sourcing heavy equipment such as WMW-Niles DLZ 1200 lathes, WMW Heckert ZFWVG gear hobbers, Union BFKF 110 horizontal borers, WMW Gotha UBR sheet straighteners, or Jehmlich Record BT-EX industrial plants specify workpiece dimensions, control type (conventional, cycle, or CNC), and desired retrofit scope.

Lines can be paired with 187 cataloged machine accessories and 17 metrology systems including Zett Mess MP1-10-B CNC 3D CMMs and Mitutoyo gauges.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.