ZMM Stomana / Nikmann Machinery

Industrial woodworking equipment from ZMM Stomana / Nikmann (Silistra, Bulgaria): sliding table panel saws, spiral-head thicknessers, spindle moulders, edge banders, band saws, four-side moulders, dust extractors, and KKS-315 cold saws.

Sliding table panel saws Baby S2, S 315, S 315A, S 350 & S 350 CNC

ZMM Stomana / Nikmann panel saws (Baby S2, S 315, S 315A, S 350, S 350 CNC) use hardened steel carriage guides. Blades span 250–350 mm with 3.0–5.5 kW motors and 120 mm scoring units. Replaceable parts cover arbors, bearings, ballscrews, and rollers.

  • Main blade Ø250–350 mm, Ø30 mm bore
  • Scoring unit Ø120 mm, 8,000–9,000 rpm
  • Sliding table 1,600–3,800 mm
  • S 350 CNC: ballscrew rip fence, 5.5 kW

Thickness planers DMS 51 with spiral cutterhead

The ZMM Stomana / Nikmann DMS 51 thickness planer machines solid timber up to 508 mm wide and 3–210 mm thick. It uses a ø100 mm spiral cutterhead with 84 inserts at 5000 rpm and three motors. Spare parts include carbide inserts, feed rollers, V-belts, and encoders.

  • Max width 508 mm, thickness 3–210 mm
  • Spiral cutterhead Ø100 mm, 84 inserts
  • Three motors: 5.5 + 1.1 VFD + 0.25 kW
  • 4-screw table lift, encoder, ~635 kg

Woodworking spindle moulders T 1000 – T 1005

ZMM Stomana / Nikmann spindle moulders (T 1000, T 1002, T 1003, T 1004, T 1005) shape solid wood and joinery profiles. Configurations offer MK4/MK5 arbors, tilting spindles, and speeds up to 15,000 rpm. Service items include arbors, precision bearings, belts, and electronic brakes.

  • Series: T 1000, T 1002, T 1003, T 1004, T 1005
  • Table opening Ø190 / Ø260 mm, hood Ø180–275 mm
  • Interchangeable MK4 and MK5 taper arbors
  • Spindle speeds up to 10,000 / 15,000 rpm

Edge banding machines KZM 6, KZM 7 & KZM 9

Nikmann / ZMM Stomana KZM edge banders (KZM 6 Compact, TF/RTF/2RTF/CNC, KZM 7, KZM 9) apply 0.4–3 mm tape to 10–50 mm panels. Units run 200 Hz HF motors at 12,000 rpm with EVA/PUR glue pots. Spare parts cover HF spindles, Ø110 mm saws, R2 cutters, heaters, and glue rollers.

  • 200 Hz HF trimming & milling motors, 12,000 rpm
  • End-trim saws Ø110ר32 mm, z=30; R2 heads Ø75 mm
  • EVA / PUR glue pot, scrapers & buffing units
  • Edge thickness 0.4–3 mm, panels 10–50 mm

Vertical band saws BS 40–61 & log mills HBB

ZMM Stomana / Nikmann BS 40, BS 50, BS 61 band saws and HBB 550 / 550GX / 750 log mills cut softwood, hardwood, and frozen timber. Machines feature rubber-bandaged iron wheels, −15°/+45° tables, and foot brakes. Service parts include wheel tyres, bearing blade guides, and tension screws.

  • Vertical models BS 40, BS 50, BS 61
  • Tilting iron worktable −15° to +45°
  • Horizontal rail log mills HBB 550 / 550GX / 750
  • Rubber-bandaged wheels & bearing blade guides

Four-side moulders VS 20N1, 4PM 180/5 & KSM 300/2

Four-side moulders VS 20N1 and 4PM 180/5 machine all four faces of timber profiles in a single pass, while KSM 300/2 performs counter-rotating brush texturing. Built for continuous millwork production lines. Spare parts cover cutter spindles, feed rollers, gearboxes, and brush shafts.

  • 4-side planing & profiling: VS 20N1, 4PM 180/5
  • Wood aging brush machine KSM 300/2 (dual brush)
  • Single-pass solid wood profile milling
  • Transfer conveyors for KZM lines

Dust extraction units SAM 2 – SAM 15

Dust collectors SAM 2, SAM 2F, SAM-3N/3NF, SAM-4N/4NF, SAM-5NF, and SAM10–SAM15 extract chips and fine wood dust at high airflow in compact footprints. Units feature sheet-steel housings and steel impeller turbines. Replaceable items include impellers, filter bags, motors, and ducts.

  • Compact extractors: SAM 2/2F, SAM-3N/4N/5NF
  • High-capacity units: SAM10 through SAM15
  • Sheet-steel body & steel impeller turbine
  • Fine dust filtration variants (F series)

Metal cold saw KKS-315 & grey-iron foundry

The KKS-315 metal circular cold saw cuts ferrous and non-ferrous tubes, profiles, and bars with ±45° swivel head and built-in coolant tank. The Silistra foundry also produces grey-iron components up to 2 t using Omega sand reclamation. Spare parts include coolant pumps, vices, and blades.

  • KKS-315 cold saw for ferrous & non-ferrous metals
  • ±45° mitre head/vice & integrated coolant tank
  • Silistra iron foundry output up to 2 tonnes
  • Furan-resin sand moulding & reclamation (Omega)

Manufacturing profile of ZMM Stomana / Nikmann

Founded in 1945 in Silistra, Bulgaria, ZMM Stomana AD shifted its engineering and manufacturing focus in 1991 to industrial woodworking machinery distributed worldwide under both ZMM Stomana and the Nikmann / Nikmann Maschinen brand.

An integrated foundry equipped with Omega furan-resin sand mixing and reclamation produces grey-iron frames and precision-ground tables weighing up to 2 tonnes for sliding table saws, planers, spindle moulders, and band saws.

Configuration selection & brand disambiguation

When specifying machinery, confirm carriage length (1,600–3,800 mm), scoring saw motor (0.75–1.1 kW at 8,000–9,000 rpm), cutterhead configuration (ø100 mm spiral head with 84 inserts on DMS 51), spindle speeds up to 10,000 or 15,000 rpm, and EVA/PUR glue pots on KZM edge banders.

Woodworking equipment from ZMM Stomana AD (Silistra) is completely distinct from the Stomana Industry steel mill in Pernik and the metalworking lathe builder ZMM Bulgaria / ZMM Sliven.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.