Xiamen YangSen NC Equipment (YANGSEN) CNC Machining Centers
Vertical, horizontal, gantry, horizontal boring, 5-axis trunnion, drill-tap, engraving-milling and vertical lathe CNC centers by Xiamen YangSen NC Equipment (YANGSEN).
Vertical Machining Centers YSV
YSV-1160, YSV-1265 and YSV-957 VMCs machine steel, iron and aluminum molds. YSV-1160 offers 1100/600/600 mm travel, a 1200x600 mm table (1100 kg) and a 15,000 rpm BBT40 spindle. Its 24-tool ATC changes tools in 1.4 s. Spare parts include spindles, ATC arms, ballscrews and guides.
- X/Y/Z travel up to 1400/820/750 mm
- BBT40 direct-drive spindle 15,000 rpm
- 24-tool side ATC (1.4 s)
- 36 m/min rapid feedrate
Horizontal Machining Centers RVZ & YSHD
RVZ-500D and YSHD-1250D HMCs machine iron and steel housings in continuous cycles. RVZ-500D offers 800/750/800 mm travel, twin 500x500 mm pallets (500 kg, 1 deg index) and a 6000 rpm BBT50 spindle with 45-tool ATC. Spare assemblies cover pallet changers, BBT50 spindles and belts.
- Twin 500x500 mm rotary pallets (1 deg)
- BBT50 spindle 6000 rpm (15/18.5 kW)
- 45-tool BT50 ATC (2.6 s)
- 48 m/min rapid traverse
Gantry Machining Centers NHE, MHE & YSMV
NHE-4029, MHE-1810 and YSMV-2218 gantry centers machine large plates, frames and dies. NHE-4029 delivers 4000/2900/1050 mm travel, a 14,000 kg table, a 350x350 mm square Z-ram and a 4000 rpm BBT50 gearbox spindle. Spare parts include gearboxes, ram wipers, bearings and 32-60 ATC units.
- NHE-4029 travel 4000/2900/1050 mm
- Table capacity up to 14,000 kg
- 350x350 mm square Z-axis ram
- BBT50 gearbox spindle 22-26 kW
Horizontal Boring & Milling Centers YSBD
YSBD-110/6T and YSBD-130/20T horizontal boring centers machine energy, marine and diesel blocks up to 6-20 t. YSBD-110/6T integrates Siemens 828D control, V3 roller guides and a center-coolant BT50 spindle with labyrinth seal. Spare parts include rotary unions, seals and roller blocks.
- B-axis rotary table 6 t to 20 t
- Siemens 828D CNC control
- Center-coolant BT50 labyrinth spindle
- V3 preload roller linear guides
5-Axis & Trunnion Machining Centers YS650-5AX & U
YS650-5AX, U-260T, U-400 and U-700 5-axis centers machine impellers, blades and complex molds. YS650-5AX provides 700/450/400 mm travel, a dia-650 mm DD rotary table (200 kg) and Siemens 840D with RTCP. Spare parts include torque motors, A/C encoders, rotary joints and spindles.
- 5-axis simultaneous RTCP control
- Dia-650 mm DD rotary table (200 kg)
- Siemens 840D CNC on YS650-5AX
- U-260T spindle 20,000 rpm
High-Speed Drilling & Tapping Centers YST
YST-650, YST-700 and YST-800 drill-tap centers process aluminum and alloy parts for 3C and automotive lines. YST-650 features a 20,000 rpm BT30 direct-drive spindle (6 kW), 48 m/min rapid feeds and a 21-tool ATC (1.8 s). Spare parts cover BT30 cartridges, ATC grippers, ballscrews and servos.
- BT30 direct-drive 20,000 rpm (6 kW)
- 48 m/min X/Y/Z rapid traverse
- 21-tool ATC (1.8 s tool change)
- YST-650 travel 600/480/300 mm
High-Speed Engraving & Milling Centers YS
YS-760A, YS-770 and YS-8012 engraving-milling centers finish copper electrodes, medical parts and steel molds. YS-760A pairs a 760 mm portal and 400 kg table with an 18,000-30,000 rpm ER32/BT30/HSK-E40 spindle and 15-tool ATC. Spare parts include electrospindles, bearings and chillers.
- Electrospindle 18,000-30,000 rpm
- ER32 / BT30 / HSK-E40 taper options
- 760 mm portal, 700x600 mm table
- 15-tool flat ATC (7.5 kW motor)
Vertical CNC Lathes YSLC
YSLC-800 and YSLC-500 vertical CNC lathes pair a vertical spindle with a horizontal rotary worktable. They machine heavy steel rings, hubs and housings via turning, milling and tapping. Spare parts cover table bearings, turret indexers, hydraulic cylinders and telescopic way covers.
- YSLC-500 and YSLC-800 series
- Vertical spindle and rotary table
- Turning, milling and tapping
- Heavy rotating rings and hubs
Manufacturing Footprint of Xiamen YangSen NC Equipment (YANGSEN)
Founded in 2007 in Xiamen, Fujian, Xiamen YangSen NC Equipment Co., Ltd. (YANGSEN / CNC Yangsen) operates two manufacturing plants across 75,000-100,000 m2 producing more than 160 CNC machine models.
The portfolio spans vertical, twin-pallet horizontal, double-column gantry, horizontal boring, 5-axis trunnion, high-speed drill-tap, engraving-milling and vertical CNC lathe centers.
Factory Metrology & Configuration Matching
Every machine undergoes factory acceptance inspection using a Hexagon 08.12.06 coordinate measuring machine, four Renishaw XL80 laser interferometers and four Renishaw QC20W ballbars.
Buyers specify X/Y/Z axis travels, V3 roller guideway options, spindle tapers (BT30, BBT40, BBT50, HSK-E40), ATC magazine capacity (15 to 60 tools), rotary table load ratings up to 20 tons and CNC controls such as Siemens 828D or 840D.
Global Equipment Selection via SpareX
SpareX prepares technical proposals for Xiamen YangSen NC Equipment (YANGSEN) CNC centers and replacement subassemblies based on workpiece envelope, material and cycle requirements.
Quotations confirm machine configuration, coolant-through-spindle options, power requirements and international shipping logistics.
Xiamen YangSen NC Equipment and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Xiamen YangSen NC Equipment and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Wilson Tool
- Equipment and parts for Steinel Normalien
- Equipment and parts for Willy Vogel / SKF Lubrication
- Equipment and parts for Wilspec Technologies
Documents and sources
- Xiamen YangSen NC Equipment Official Chinese Website
- About Xiamen YangSen NC Equipment & Xiamen Plants
- Factory Quality Control: Hexagon CMM & Renishaw XL80/QC20W
- YangSen Spare Parts Workshop & After-Sales Service
- Vertical Machining Center YSV-1160 Specifications
- Vertical CNC Milling Centers YSV-1265 and YSV-957
- Horizontal Machining Center RVZ-500D Specifications
- Horizontal Machining Centers YSHD-1250D
- Double-Column Gantry Center NHE-4029 Specifications
- Gantry Machining Center MHE-1810 Specifications
- CNC Gantry Machining Centers Overview
- Horizontal Boring Center YSBD-110/6T Specifications
- 5-Axis Machining Center YS650-5AX Specifications
- Trunnion-Style 5-Axis Machining Centers U-260T
- High-Speed Drilling & Tapping Center YST-650 Specifications
- High-Speed Engraving & Milling Center YS-760A Specifications
- Vertical CNC Lathe Series YSLC-800 and YSLC-500
