Willy Vogel / SKF Lubrication Centralized Systems & Pumps

Automated lubrication stations MKU, MFE, KFG, piston distributors 341/VR, progressive blocks VPKM/SSV, and LubriLean MQL units by Willy Vogel / SKF Lubrication. Sizing by system layout and nameplate.

Single-line pumps MKU, MKF, MKL, MFE

MKU, MKF, MKL, and MFE single-line gear pump units meter oils from 20 to 1,500 mm²/s or NLGI 000/00 fluid grease at up to 30 bar. Reservoirs come in 2, 3, and 6-liter plastic or metal versions. Flow rates reach 0.5 L/min for Willy Vogel and SKF Lubrication lines.

  • Oil 20–1,500 mm²/s
  • Fluid grease NLGI 000/00
  • Pressure up to 28–30 bar
  • 2 L, 3 L, 6 L tanks

Progressive piston pumps KFG, KFA, ECP

KFG and KFA piston pump units deliver greases up to NLGI grade 2 against up to 300 bar backpressure for Willy Vogel / SKF Lubrication systems. Each KFG housing mounts up to three pump elements rated from 0.8 to 5.0 cm³/min. Units supply up to 100 points on 12/24 V DC or AC.

  • Grease up to NLGI 2
  • Up to 300 bar pressure
  • 0.8–5.0 cm³/min output
  • Up to 100 points

Single-line piston distributors 341, VR, VN, AB

MonoFlex piston feeders in series 341, VR, VN, AB, and 370 meter 0.01 to 1.3 cm³ per stroke across 2 to 12 outlets. Pre-lubrication VR blocks handle high backpressure, while VN post-lubrication blocks dispense upon line relief. Interchangeable metering heads fit machine tools and chains.

  • 0.01–1.3 cm³ per stroke
  • 2, 3, 5, or 12 outlets
  • VR pre- / VN post-lube
  • 370 impulse series

Progressive distributors VPKM, VPM, SSV

Sectional VPG, VPKM, VPM and block SSV, SSVD, VPBM progressive feeders meter oil up to 200 bar and grease up to 300 bar. Each feeder provides 3 to 20 outlets and serves up to 150 points, while PSG1–PSG3 segment units reach 3,200 mm³ per outlet.

  • 200 bar oil / 300 bar grease
  • 3 to 20 outlets per block
  • PSG up to 3,200 mm³
  • Up to 150 lube points

Dual-line DuoFlex & Variolub circulating systems

Dual-line feeders SG, SGA, DCM, VSG, and VSL operate on two alternating main lines for oil and grease up to NLGI 2 across thousands of points. Heavy mills and paper machines also use Variolub oil-circulation stations with modular SMD flow-monitoring throttles.

  • Two alternating main lines
  • SG, SGA, DCM, VSG, VSL
  • Grease up to NLGI 2
  • Variolub & SMD throttles

MQL systems LubriLean & VectoLub

LubriLean Basic, Smart, Vario, DigitalSuper, and VectoLub MQL units meter 10 to 50 ml of oil per hour for external or through-tool CNC dry machining. Lineup includes UFB20, UFS20, UFV10, and UFD10 controllers alongside 501-301, 501-302, and 501-303 micro-oil injectors.

  • 10–50 ml/hour oil feed
  • External or through-tool
  • UFB20 / UFS20 / UFD10
  • 501-series micro-injectors

WindLub, rail systems & Spandau pumps

WindLub packages lubricate wind turbine pitch, azimuth, and main bearings with electrical level monitoring. Rail wheel-flange systems serve up to 250 axles from –25 °C to +75 °C, while the Spandau Pumps division builds sealless immersion pumps for CNC coolant and ink.

  • WindLub turbine systems
  • Rail flange up to 250 axles
  • Operating range –25…+75 °C
  • Spandau immersion pumps

Controllers, pressure switches & pump elements

IG36, IGZ36, IG38, and IG502 units control cycle intervals, pump run-time, and tank levels at 0–60 °C. Pressure switches DS-W20-4 (20 bar) and DS-W12-4 (12 bar) handle 45 bar at IP65, 176-112-000 handles 80 bar, and KFG1.U0/U1 elements connect via M14x1.5.

  • IG36 / IGZ36 / IG502 units
  • DS-W20-4 / 176-112 switches
  • KFG1.U0 / U1 M14x1.5
  • DIN 24550 line filters

Willy Vogel / SKF Lubrication Centralized Architecture

Founded in Berlin in 1929 and integrated into SKF in 2004 as SKF Lubrication Systems Germany AG, Willy Vogel designs automated lubrication systems for machine tools, rolling mills, paper lines, wind turbines, and commercial/rail vehicles.

System selection matches lubricant viscosity and point count: MonoFlex gear pump units (MKU, MKF, MKL, MFE) deliver 20–1,500 mm²/s oil or NLGI 000/00 fluid grease up to 30 bar, ProFlex piston pumps (KFG, KFA) handle NLGI 2 grease up to 300 bar, and DuoFlex dual-line feeders (SG, SGA, DCM) serve heavy multi-thousand-point lines.

MQL Machining, Spandau Pumps & Cycle Monitoring

LubriLean (Basic, Smart, Vario, DigitalSuper) and VectoLub MQL units meter 10–50 ml of oil per hour externally or through the spindle to cut CNC cycle times, complemented by Spandau sealless immersion pumps for machine-tool coolant and ink circuits.

IG36, IGZ36, IG38, and IG502 control units monitor line pressure via DS-W20-4 (20 bar) or 176-112-000 (up to 80 bar) switches alongside tank level switches and DIN 24550 filters.

Willy Vogel / SKF Lubrication and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Willy Vogel / SKF Lubrication and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.