Wilson Tool Punching, Bending & Stamping Tooling Systems
Wilson Tool International precision tooling for turret punch presses, press brakes, and stamping dies: Thick Turret EXP and iSeries, Trumpf-Style, QuickTap, V-Series Black, eClamp, Impax, and Superior Components.
Thick Turret, EXP & iSeries Punch Tooling
Thick turret tooling covers HPX, EXP quick-change punch tips, HP2, HP, Basix, and laser-marked iSeries assemblies for AITS tool management. Fits Amada, Strippit, and Salvagnini presses. Replaceable parts include punch tips, Dura-Die dies, springs, and guide sleeves.
- Small stations: HPX, EXP, HP2, HP, Basix
- Parting: HP DuraBlade and Dura-Die
- Compatibility: Thick Turret, Strippit, Salvagnini
- AITS tracking: Data Matrix serial codes
Trumpf-Style 2-4-1, GL Dies & Multi-Tools
Trumpf-style tooling covers Size 1 and Size 2 configurations in 2-4-1 and standard builds alongside cartridges and parting tools. GL dies provide a 2.5 mm grindlife for extended press runs. Multi-tools in 4, 5, 10, and 16 stations use replaceable punches, dies, and adapters.
- Sizes: Size 1 and Size 2 (2-4-1 & standard)
- GL dies: 2.5 mm grindlife allowance
- Multi-tools: 4, 5, 10, 16 stations
- Parts: cartridges, punches, die adapters
QuickTap & Trumpf-Style In-Machine Tapping
B-station QuickTap units feature a built-in fluid injection system and tap up to 200 holes per minute directly in the punch press. Available for thick turret, Strippit PX, Euromac, and Trumpf machines using thread forming. Service parts include taps, pitch inserts, and gearboxes.
- Speed: up to 200 tapped holes per minute
- Presses: Thick Turret, Strippit PX, Euromac
- Fluid system: built-in lubrication injection
- Spares: taps, pitch inserts, gearboxes
Press Brake Tooling & V-Series Black (VSB) Dies
Bending tooling covers WT (Wila/Trumpf), American, European, LVD, ATC, and Bystronic press brakes. V-Series Black (VSB) dies enable short flanges, small radii, and bends close to holes. Serviceable parts include replaceable die inserts, springs, and urethane pads.
- Styles: WT, American, European, LVD, ATC
- Bystronic & custom profiles to part drawing
- VSB dies: short flanges and hole-edge bends
- Wear items: VSB inserts, springs, urethane
eClamp, Express Rail Clamping & Nitrex HRC-70
All-electric eClamp modules and Express Rail holders reduce setup time on hydraulic and electric press brakes. Patented Nitrex surface treatment reaches HRC-70 hardness to reduce friction and galling. Service spares include push-button parts, crowning wedges, and tool holders.
- eClamp: modular all-electric clamping system
- Nitrex: HRC-70 heat-treated surface hardness
- Clamps: Express Rail, push-button, manual
- Spares: crowning units, push-buttons, holders
Impax, Exacta & Superior Die Set Components
Impax, Exacta, and Superior Components supply headed and ball-lock punches, die buttons, 2D shapes, and HP Accu-Lock retainer inserts. Type A and Type D die components come in inch and metric demountable, press-fit, and ball-bearing styles. Spares include punches, buttons, and guide bushings.
- Divisions: Impax, Exacta, Superior Components
- Mounting: headed, ball-lock, HP Accu-Lock
- Die sets: Type A and Type D (inch & metric)
- Options: demountable, press-fit, ball bearing
Wilson Tool International Profile & Platform Coverage
Founded in 1966 in St. Paul, Minnesota, Wilson Tool International operates over 550,000 square feet of manufacturing space with more than 900 employees globally and acquired Perfection Machine and Tool Works (PMTW) in October 2023.
Product lines span punching (Thick Turret, Thin Strippit, Trumpf-style Size 1 and Size 2, Salvagnini, Wiedemann), press brake bending (WT/Wila, American, European, LVD, Bystronic, ATC), and stamping divisions Impax Tooling Solutions, Exacta, and Superior Components.
This line is distinct from Wilson Hardness (Buehler) testers and Wilson sporting goods.
Changeover Efficiency, Nitrex Surface Hardening & AITS Tracking
EXP quick-change punch tips reduce press downtime and storage footprint, B-station QuickTap units form threads in-machine at up to 200 holes per minute with built-in fluid injection, and laser-marked iSeries components carry Data Matrix serial codes for AITS tool management.
On press brakes, patented Nitrex heat-treatment raises surface hardness to HRC-70 to resist galling, V-Series Black (VSB) dies support short flanges and bends near holes using replaceable inserts, and modular all-electric eClamp systems automate clamping.
Stamping Punches, HP Accu-Lock Retainers & Type A/D Die Sets
Impax Tooling Solutions and Exacta supply headed and ball-lock punches, die buttons, custom 2D profiles, and HP Accu-Lock retainer inserts engineered for quick in-house retainer adaptation.
Superior Components provides Type A and Type D die set components in both inch and metric standards across demountable, press-fit, and ball-bearing guide configurations.
Wilson Tool and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wilson Tool and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Steinel Normalien
- Equipment and parts for Hecker Werke
- Equipment and parts for Frenzelit
- Equipment and parts for Willy Vogel / SKF Lubrication
Documents and sources
- Wilson Tool International official site
- About Wilson Tool International
- Perfection Machine and Tool Works (PMTW) acquisition
- Thick Turret Tooling Solutions Catalog
- Trumpf-Style Tooling Solutions Catalog
- In-machine tapping tools (QuickTap)
- iSeries tooling for AITS management
- Press brake tooling options & styles
- Press brake tooling, eClamp and Nitrex
- V-Series Black (VSB) dies user reference
- Impax Tooling Solutions Catalog
- Superior Components Die Set Catalog
