Wilspec Technologies (Wilspec) HVAC/R Controls, Sensors and Valves

Industrial pressure switches (HM, HR, HC, APS), DT100 and Force pressure transducers, RV reversing valves, Gatekeeper solenoid valves, Shift filter driers, RBV ball valves, and CT contactors.

HM, HR, HC and HS Pressure Switches

Fixed-setpoint HM (manual reset, SPST), HR (auto reset, SPDT), and HC (sealed or vented) switches protect HVAC/R chillers, rail, and industrial compressors. Rated 0 to 50 bar (725 psig), 345 bar burst, and -55 to +135 C fluid temp. Available with 1/4" SAE, 1/8"-27 NPT, or copper capillary ports.

  • Pressure: 0 to 50 bar (725 psig)
  • Burst pressure: 345 bar (5000 psig)
  • Ratings: up to 13 A FLA / 65 A LRA
  • Ports: SAE, NPT, capillary tube

APS Adjustable Pressure Controls

Single and dual APS controls use laser-welded double bellows with auto or manual reset and SPDT contacts (12 A FLA / 72 A LRA at 120/240 VAC). High-side range spans 6 to 32 bar (34 bar max) and low-side -0.3 to 7 bar (20 bar max). Qualified to UL 60335-2-40 Annex JJ (LZGH) for A2L refrigerants.

  • High range: 6 to 32 bar (136 bar burst)
  • Low range: -0.3 to 7 bar (80 bar burst)
  • Ambient: -50 C to +70 C (-60 to +160 F)
  • A2L listed: UL 60335-2-40 Annex JJ

DT100 and Force Series Pressure Transducers

Piezo-resistive DT100 and Force Series transducers with brass or stainless steel bodies span vacuum to 60,000 psig (4137 bar). They accept 5 VDC or 12-32 VDC power, deliver 0.5-4.5 VDC or 4-20 mA outputs at 0.5% or 1.0% accuracy, and last 10,000,000 cycles with Metri-Pack, NPT, or SAE ports.

  • Range: Vacuum to 60,000 psig (4137 bar)
  • Output: 0.5-4.5 VDC or 4-20 mA
  • Accuracy: 0.5% or 1.0%
  • Life rating: 10,000,000 cycles

RV Series 4-Way Reversing Valves

Hermetically sealed brass RV Series valves (Shift Series) use an integrated solenoid pilot to switch heat pump flow between cooling and heating for 1 to 15 ton units. Rated 0 to 690 psig and -40 to +70 C, with 1/4" to 1 3/8" copper tubes compatible with R22, R134A, R404A, R407C, and R410A.

  • Capacity: 1 to 15 ton models
  • Operating pressure: 0 to 690 psig
  • Fluids: R22, R134A, R404A, R407C, R410A
  • Copper tubes: 1/4" to 1 3/8" ID

Gatekeeper Series Solenoid Valves

Direct and pilot Gatekeeper solenoid valves control liquid and refrigerant flow in HVAC/R and process loops. Rated to 609 psi max pressure, 377 psi actuating differential, and -35 to +130 C fluid temperature. Built for 300K cycles with 1.9 to 31.7 mm ports and UL/TUV compliance.

  • Max operating pressure: 609 psi
  • Actuating differential: up to 377 psi
  • Fluid temp: -35 C to +130 C
  • Cycle life: 300,000 cycles

Shift FD and Guardian Filter Driers

Hermetic FD (Shift) and steel or copper Guardian filter driers remove moisture, acids, and debris in mono-flow and bi-flow circuits. Rated 1 to 50 tons (93.5–176 kW), 0 to 680 psig, and -40 to +70 C. Filled with molecular sieve, solid core, or activated alumina for R22/R134A/R404A/R407C/R410A.

  • Capacity: 1 to 50 tons (93.5–176 kW)
  • Operating pressure: 0 to 680 psig
  • Temperature range: -40 C to +70 C
  • Flow: Mono-flow or Bi-flow

RBV Ball Valves and Shift Sight Glasses

Full-port forged brass RBV ball valves (3/8"–5" copper ports, 0–700 psig / 48 bar) allow bi-flow mounting with optional Schrader access ports. Shift sight glasses (0.25"–1 1/8", 667 psig, -40 to +150 C) use explosion-proof view glass to monitor refrigerant flow and moisture.

  • RBV pressure: 0 to 700 psig (48 bar)
  • RBV connections: 3/8" to 5" copper
  • Sight glass: up to 667 psig, -40 to +150 C
  • Options: Schrader access port, braze/flare

CT/Commander Contactors, Charger Relays, CA370 Capacitors and XF Transformers

CT and Commander contactors (1-4 poles, 20-90 A, 24-600 VAC coils, 250K cycles) and Charger relays (CR38/CR94/CR84/CR10 up to 25 A) switch compressor and fan loads. Oil-filled CA370 capacitors (2-80 uF, 600 VAC, P1) and Class 2 XF transformers (20-100 VA) power control loops.

  • CT/Commander: 20 to 90 A, 1-4 poles
  • Charger relays: CR38 / CR94 / CR84 / CR10
  • CA370 capacitors: 2 to 80 uF, up to 600 VAC
  • XF transformers: 20 to 100 VA, 50/60 Hz

Selecting HM, HR, HC Pressure Switches, APS Controls and DT100 Transducers

Wilspec Technologies (Wilspec) builds fixed-setpoint pressure switches in HM (manual reset, SPST), HR (auto reset, SPDT), and HC (sealed or vented motor-duty up to 13 A FLA at 120 VAC) configurations alongside single and dual APS adjustable pressure controls with laser-welded double bellows.

Adjustable controls carry UL 60335-2-40 Annex JJ (LZGH) qualification for A2L refrigerants.

For continuous electronic feedback in compressors, chillers, and industrial loops, Force Series and DT100 piezo-resistive pressure transducers offer brass or stainless steel bodies, 0.5% or 1.0% accuracy, 0.5-4.5 VDC ratiometric or 4-20 mA current outputs, and 10,000,000-cycle life ratings across vacuum to 60,000 psig (4137 bar).

HVAC/R Valve Line and Electrical Control Components Integration

Heat pump and refrigeration circuits pair RV Series 4-way reversing valves (1 to 15 ton, 0 to 690 psig, 1/4" to 1 3/8" copper tubes) with Gatekeeper direct or pilot solenoid valves (up to 609 psi, 300,000 cycles), Shift FD and Guardian filter driers (1 to 50 tons), full-port RBV ball valves (3/8" to 5", up to 700 psig), and explosion-proof Shift sight glasses.

Motor and compressor switching relies on CT and Commander definite purpose contactors (20 to 90 A, 1 to 4 poles, 24 to 600 VAC coils), Charger Series relays (CR38, CR94, CR84, CR10), oil-filled CA370 polypropylene run capacitors (2 to 80 uF, P1), and Class 2 XF control transformers (20 to 100 VA, 50/60 Hz).

Wilspec Technologies and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wilspec Technologies and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.