Frenzelit Gaskets, Expansion Joints and Insulation

Frenzelit GmbH (Germany, founded in 1881): novaphit® and novatec® graphite gaskets, novapress® fibre gaskets, novaflon® PTFE, novamica® mica gaskets, fabric and PTFE expansion joints, insulation.

novaphit® Graphite Gaskets

novaphit® sheets are made of expanded graphite; the family covers −270 to 550 °C. SSTC and SSTC TA-L carry a 1.4404/316L expanded-metal insert, grade 400 a smooth stainless sheet, and VS has no insert. Multilayer MST withstands internal pressure up to 250 bar and has XP technology as standard.

  • Family: −270 to 550 °C
  • MST: internal pressure to 250 bar
  • SSTC: 1.4404/316L insert
  • VS: no insert

novatec® PREMIUM XP Fibre-Reinforced Graphite

novatec® PREMIUM XP is a fibre-reinforced gasket material with a very high graphite content. It handles demanding media at temperatures up to about 250 °C, reaches sealing category L0,01 in typical applications and needs no metal insert. Joints can be designed to DIN EN 1591-1.

  • PREMIUM XP: up to about 250 °C
  • Sealing category L0,01
  • No metal insert needed
  • Design to DIN EN 1591-1

novapress® Fibre Gaskets

novapress® are elastomer-bonded gasket sheets based on aramid fibres: grades 880, 850, UNIVERSAL, BASIC, MULTI II and 260. Grade 880 offers about three times the flange adaptability of classic fibre gaskets; MULTI II with graphite suits steam and hot oil; BASIC covers medium pressures.

  • Base: aramid fibre
  • 880: about 3× adaptability
  • MULTI II: steam and hot oil
  • 850: gearbox and pump covers

novaflon® PTFE Gaskets

novaflon® gaskets are modified and expanded PTFE for media from pH 0 to 14 at −210 to +260 °C. Grade 500 is pure expanded PTFE, 300 is silicate-filled for concentrated acids, 200 is barium sulphate-filled for strong alkalis, and 100 suits GRP and enamelled flanges.

  • −210 to +260 °C
  • Media: pH 0 to 14
  • 500: pure ePTFE
  • 100: enamelled flanges

novamica® Mica Gaskets

novamica® is phlogopite mica with a very low binder content: heat resistance up to 1000 °C, worthwhile from 400 °C. THERMEX adds a stainless expanded-metal insert for exhaust systems, turbochargers and hot gas duty. The material does not ignite in the ASTM SAE J369 burn test.

  • Heat: up to 1000 °C
  • Use from 400 °C
  • THERMEX: exhaust and hot gas
  • ASTM SAE J369 burn test

Frenzelit Fabric Expansion Joints

Fabric expansion joints absorb axial and lateral movements and vibration in ducts and pipelines carrying hot air and flue gas. Layers are built from in-house fabrics isoGLAS®, isoTHERM® and novatex® to project dimensions. Example: Type 1.131/03 for gas turbine exhaust, 570 °C and 40 mbar.

  • Type 1.131/03: 570 °C, 40 mbar
  • Type 1.011/IS: 650 °C, 60 mbar
  • isoGLAS® and isoTHERM® fabrics
  • RAL GZ-719 requirements

texlam® and multilam® PTFE Composites for Expansion Joints

texlam® materials for chemical and flue gas cleaning plants combine PTFE with glass fabric and resist up to 316 °C; texlam® 1250 and 1500 are PTFE-coated on both sides for heavy condensate. multilam® 300 is a PTFE laminate without fabric, rated to 250 °C. Steel joints are built individually.

  • texlam®: up to 316 °C
  • multilam® 300: up to 250 °C
  • texlam® 1250/1500: PTFE both sides
  • Steel joints: round and rectangular

Frenzelit Insulation and Technical Textiles

Frenzelit insulation materials withstand up to 1100 °C: needle felts for thermal and acoustic insulation, fabrics, tapes, cords, packings, sleeves, boards and transport rollers for steel lines. Moulded and die-cut parts and gas turbine insulation pads are made to customer drawings.

  • Heat: up to 1100 °C
  • Needle felts
  • Gas turbine insulation pads
  • Transport rollers for steel

Selecting Frenzelit Gaskets by Medium and Temperature

For high temperatures and changing loads, novaphit® graphite (−270 to 550 °C) is the choice; multilayer MST withstands internal pressure up to 250 bar. Where a metal insert is unwanted, novatec® PREMIUM XP (up to about 250 °C) applies.

novaflon® PTFE gaskets (−210 to +260 °C) cover media from pH 0 to 14, and novamica® mica gaskets serve from 400 °C up to 1000 °C.

novapress® aramid fibre gaskets cover standard duties: BASIC for medium pressures and temperatures, MULTI II with graphite for steam and hot oil, 850 for gearbox and pump covers. Gasket characteristics to DIN EN 13555 allow flange joints to be designed to DIN EN 1591-1.

Frenzelit Manufacturing and Expansion Joint Design

Frenzelit GmbH is an independent family company in Bad Berneck, Germany. Guido Frenzel founded it in 1881 to make board; gasket materials followed in 1920 and fabric expansion joints in 1963. Expansion joints are built at the Himmelkron, Bangalore and Lexington plants.

A fabric expansion joint is designed from the installation dimensions, pressure, temperature, medium and operating movements.

Examples include Type 1.131/03 for gas turbine exhaust (570 °C, 40 mbar) and Type 1.011/IS for diesel exhaust (650 °C, 60 mbar); chemical duty uses texlam® up to 316 °C and multilam® 300 up to 250 °C.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.