Vibration Research vibration controllers and shakers
Technical selection of Vibration Research hardware: VR10500, VR9700 and VR9500 vibration controllers, the ObserVR1000 portable analyzer, VR4600 to VR5200HF electrodynamic shakers and the accelerometer calibration package.
VR10500 vibration controller
The VR10500 serves high-channel-count and multi-shaker tests: units stack up to 512 channels, the sample rate reaches 256 kHz, inputs are 24-bit and outputs 32-bit. One unit has up to 6 control outputs, 4 analog and 2 digital. It runs the VibrationVIEW and ObserVIEW software.
- Up to 512 channels
- Up to 256 kHz sampling
- 4 analog + 2 digital outputs
- 24-bit in, 32-bit out
VR9700 vibration controller
The VR9700 is a compact controller for low- to medium-channel-count setups: up to 128 channels, up to 256 kHz on inputs and outputs and 104,000 lines of resolution in Random. It has a Class II double-insulated chassis and USB 3.2 for autonomous operation. VibrationVIEW 2025 and newer support it.
- Up to 128 channels
- Up to 256 kHz in and out
- 104,000 lines in Random
- Class II chassis, USB 3.2
VR9500 vibration controller
The VR9500 is the previous-generation controller with a single-core RISC processor: up to 128 channels, up to 200 kHz sample rate and 26,000 lines of resolution. Production is ending as some of its components are no longer available; support continues and the VR9700 is the successor.
- Up to 128 channels
- Up to 200 kHz sampling
- 26,000 lines of resolution
- Single-core RISC
ObserVR1000 portable analyzer
The ObserVR1000 is a battery-powered portable data acquisition system with 16 to 128 inputs, 128 kHz simultaneous sampling, 802.11 b/g/n WiFi and gigabit Ethernet. The battery lasts 6+ hours, plus 6 with a battery pack. It can drive a shaker and stack with a VR10500 or VR9700.
- 16 to 128 inputs
- 128 kHz simultaneous sampling
- 6+ hour battery life
- 40 V tolerant inputs
VR4600 and VR5800 shaker systems
Each system is an electrodynamic shaker with a matching linear power amplifier. VR4600: 606 lbf pk sine, 449 lbf rms random, 2 to 4,500 Hz, 1.77 inch stroke and an optional slip table. VR5800: 500 lbf pk sine, 350 lbf rms random, a 6 inch armature table and a degauss coil.
- VR4600: 606 lbf pk sine
- VR4600: 2 to 4,500 Hz
- VR5800: 500 lbf pk sine
- VR5800: 6 inch armature table
VR5500, VR5600, VR5700 and VR5800-BSR shakers
The VR5800-BSR is a 250 lbf system with the blower removed and a DC field supply for a quiet field. The VR5700 gives 225 lbf, the VR5600 110 lbf pk and the VR5500 75 lbf pk with a permanent magnet field. The VR5700, VR5600 and VR5500 amplifiers switch to current source mode for modal tests.
- VR5800-BSR: 250 lbf
- VR5700: 225 lbf
- VR5600: 110 lbf, DC to 6,500 Hz
- VR5500: 75 lbf, DC to 6,500 Hz
VR4044, VR5400, VR4022 and VR5200HF small shakers
The VR4044 is a 44 lbf pk permanent magnet shaker; its rare-earth magnet reduces weight. The VR5400 gives 41 lbf pk and a current monitor signal for modal tests. The VR4022 is a 22 lbf shaker for modal and general-purpose testing. The VR5200HF gives 13 lbf pk, DC to 14,000 Hz, on a 2.125 inch table.
- VR4044: 44 lbf, DC to 7,000 Hz
- VR5400: 41 lbf pk sine
- VR4022: 22 lbf, DC to 7,000 Hz
- VR5200HF: DC to 14,000 Hz
Accelerometer calibration package
The package verifies IEPE and charge-mode accelerometers by back-to-back comparison per ISO 16063-21 in 10 minutes. It combines VR9106 software, a VR9700 controller with 2 inputs and 1 output enabled, and a VR5200HF shaker of 13 lbf, DC to 14,000 Hz. New sensitivity is written to the sensor TEDS.
- Back-to-back, ISO 16063-21
- 10-minute procedure
- 1.5 % from 100 Hz to 2.5 kHz
- Writes to sensor TEDS
Choosing a Vibration Research controller
Vibration Research of Jenison, Michigan, USA, has designed and manufactured vibration control and data acquisition systems for testing on electrodynamic and servo-hydraulic shakers since 1995. The company was founded by John Van Baren.
The VR10500 serves high-channel-count and multi-shaker tests with up to 512 stacked channels and up to 6 control outputs. The VR9700 offers up to 128 channels in a compact Class II chassis, and the ObserVR1000 is a portable battery unit with 16 to 128 inputs.
Any combination of VR10500, VR9700 and ObserVR1000 can be configured for control, and a VR controller can replace the one on an existing shaker.
Sizing an electrodynamic shaker by force
A Vibration Research system is a shaker with a matching linear direct-coupled power amplifier. Sine force by model: VR4600 606 lbf pk, VR5800 500 lbf pk, VR5800-BSR 250 lbf, VR5700 225 lbf, VR5600 110 lbf pk, VR5500 75 lbf pk, VR4044 44 lbf pk, VR5400 41 lbf pk, VR4022 22 lbf, VR5200HF 13 lbf pk.
The upper frequency differs by model: 4,500 Hz for the VR4600 and VR5800, 6,500 Hz for the VR5600 and VR5500, 7,000 Hz for the VR4044 and VR4022, 14,000 Hz for the VR5200HF. For modal tests the VR5700, VR5600 and VR5500 amplifiers switch to current source mode.
Test modes in VibrationVIEW
Sine runs swept or fixed-frequency tests with control of acceleration, velocity or displacement. Shock runs classical, user-defined or SRS-synthesized transient pulses. Field Data Replication reproduces field-recorded acceleration waveforms on a shaker.
Software modules are activated by electronic keys.
The hardware supports single-axis, dual-axis, dual-phase, rotational, three-axis, multi-loop/four-post and seismic control. On the VR10500, Sine, Random, Shock and FDR can run 2, 3 or 4 output drive loops at once.
Vibration Research and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Vibration Research and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Vibration Source / VIBSOURCE
- Equipment and parts for Shinko Technos
- Equipment and parts for KOFLOC
- Equipment and parts for Novasina
Documents and sources
- About Vibration Research — company
- Our story — founded in 1995
- Vibration controllers — model overview
- VR10500 controller — specifications
- VR9700 controller — specifications
- FAQ — hardware and calibration
- ObserVR1000 analyzer — specifications
- Shaker systems — specifications
- Accelerometer calibration — package
