Vibration Source / VIBSOURCE Vibration & Shock Testing Equipment

Industrial electrodynamic shakers, reactive vibration tables, hydraulic vibrators, classical shock testers, drop machines, battery abuse chambers, and Vibrochamber climatic systems by Vibration Source / VIBSOURCE (Taiwan).

Electrodynamic Vibration Testers VS-300V / VS-16000VH

High-frequency Vibration Source / VIBSOURCE electrodynamic shakers run sine, random, and shock tests. VS-300V achieves >4000 Hz axial shaft resonance, while VS-16000VH delivers 160 kN force across 1–2100 Hz. Field coils, armatures, support airbags, and power amplifiers are serviceable.

  • Max force: 160 kN (VS-16000VH)
  • Frequency: 1–2100 Hz
  • Axial resonance: >4000 Hz
  • Parts: armature, airbag, amplifier

Permanent Magnet Shakers VS-5V / VS-30V

Compact Vibration Source / VIBSOURCE shakers use a static magnetic field for modal analysis, structural testing, and accelerometer calibration. Their low moving mass suits electronic and automotive components. Replacement moving coils, flexure springs, and signal leads match by nameplate.

  • Models: VS-5V, VS-30V
  • Design: static magnetic field
  • Focus: modal & sensor calibration
  • Parts: moving coil, flexure suspension

Reactive Mechanical Vibration Testers VS-3030LS / VS-5060M

Low-frequency Vibration Source / VIBSOURCE mechanical tables (VS-3030LS, VS-3040L, VS-5060M/-H, VS-5060L) simulate transport stress at 5–100 Hz. Compliant with ISO 5344, VS-5060M supports 150 kg on a 50×60 cm table with 0–2.8 mm stroke. Eccentric blocks, belts, and isolators are replaceable.

  • Frequency: 5–100 Hz (ISO 5344)
  • Max payload: 150 kg (50×60 cm)
  • Displacement: 0–2.8 mm (p-p)
  • Parts: eccentric unit, drive, isolators

Hydraulic Vibration Machines VS-1016H / VS-1016V

Oil-pressure Vibration Source / VIBSOURCE shakers (VS-1016H horizontal, VS-1016V vertical) handle heavy loads and long strokes. Built on precision linear slides, steel frames, and air-spring bases with displacement sensors. Servo valves, seals, and filters are serviceable.

  • Models: VS-1016H / VS-1016V
  • Actuation: hydraulic cylinder + sensor
  • Guidance: precision linear slides
  • Parts: servo valves, seals, air springs

Classical Shock Test Machines Shock-50 / Shock-5

Double-column Vibration Source / VIBSOURCE shock testers reproduce half-sine, square, and sawtooth pulses per IEC 60068-2-27/29, MIL-STD-1344A, and UN 38.3. Shock-50 offers a 48×50 cm alloy table, 50 kgw load, 1.5–30 ms duration, and 15–600G peak. Pulse pads, lifters, and locks are replaceable.

  • Pulse: 1.5–30 ms, 15–600G peak
  • Table: 48×50 cm, 50 kgw max load
  • Standards: IEC 60068, MIL-STD, UN38.3
  • Parts: wave pads, lift drive, latches

Drop Test Machines VS-1018 / VS-1019 / VS-6467

Vibration Source / VIBSOURCE drop testers evaluate packaging corner, edge, and face impacts plus handheld devices. Single-arm pneumatic VS-1018 handles 65 kg across 30–160 cm height on a 29×50 cm swing arm with a φ150 mm spindle. Pneumatic cylinders, limit switches, and leadscrews match by model.

  • Drop height: 30–160 cm (VS-1018)
  • Payload: 65 kg, 220V single-phase
  • Series: VS-1019, VS-1018, VS-6467
  • Parts: air arm, leadscrew, micro-switch

Battery Abuse Test Machines VS-1013 / VS-1014H / VS-1015

Vibration Source / VIBSOURCE battery testers perform impact, crush, nail penetration, side impact, and rollover validations. VS-1014H combines crush, nail penetration, and heating per UL 2054 inside an armored chamber with gas exhaust. Penetration spikes, platens, seals, and sensors are serviced.

  • Models: VS-1013, VS-1014H/P, VS-1015
  • 3-in-1: crush, nail, thermal cycle
  • Compliance: UL 2054, U/I/T logging
  • Parts: spikes, glass, seals, sensors

Vibrochamber Climatic & Thermal Shock Chambers

Vibration Source / VIBSOURCE programmable humidity and 3-zone thermal shock chambers dock with electrodynamic shakers such as VS-300V Vibrochamber for combined temperature-humidity-vibration testing. Silicone thermal boots, heaters, refrigeration valves, and PLC panels are replaceable.

  • Integration: Vibrochamber + shaker
  • Thermal shock: 3-zone air switch
  • Control: independent PLC interlocks
  • Parts: thermal boot, heater, PT100, SSR

Selecting Vibration Source / VIBSOURCE Systems by Test Standard and Force

Established in 1995 in New Taipei City, Taiwan by former ITRI specialists, Vibration Source Technology Co., Ltd. (VIBSOURCE) engineers mechanical reliability equipment meeting ISO 9001:2015 with a TAF ISO/IEC 17025:2017 accredited laboratory.

Vibration Source / VIBSOURCE electrodynamic shakers span from compact VS-300V systems with >4000 Hz axial resonance to heavy-duty VS-16000VH installations delivering 160 kN force across 1–2100 Hz.

For heavy-force multi-axis validation, VS-16000VH supports 76 mm peak displacement, 2.0 m/s peak velocity, 100G acceleration, a 150×150 cm vertical table (600 kg), and a 200×200 cm horizontal slip table (690 kg).

Compact permanent-magnet shakers VS-5V and VS-30V serve modal analysis and accelerometer calibration.

Reactive, Hydraulic, Shock, Drop, Battery, and Climatic Equipment

For ISO 5344 transport vibration (5–100 Hz, 0–2.8 mm p-p stroke, up to 150 kg on a 50×60 cm table), VIBSOURCE builds foundation-free reactive testers VS-3030LS, VS-3040L, and VS-5060M/-H, while hydraulic systems VS-1016H and VS-1016V handle heavy low-frequency strokes on linear slides with air-spring isolation.

Classical shock testers Shock-50 and Shock-5 deliver 1.5–30 ms half-sine pulses at 15–600G per IEC 60068-2-27/29, MIL-STD-1344A, and UN 38.3.

Packaging drop machines VS-1018/VS-1019/VS-6467 cover 30–160 cm drops up to 65 kg, battery safety systems VS-1014H run 3-in-1 crush, nail penetration, and heating per UL 2054, and Vibrochamber units integrate temperature-humidity stress with vibration.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.