Shinko Technos temperature controllers
Technical selection of Shinko Technos ACS2, BCS2, BCR2, BCD2, BCS3, DCL-33A and JCL-33A temperature controllers, QX1 modules, SA-500 solid state relays, PA-200 power controllers and HR-700 recorders.
ACS2 controller in a 48 x 48 mm housing
The ACS2 digital indicating controller measures 48 x 48 x 68 mm with a 60 mm panel depth. Input sampling is 10 ms (DC current and voltage only), 50 ms or 125 ms, and up to 8 PID blocks hold settings for different processes. Supply is 24 V DC, 48 V DC or 100 to 240 V AC; the front panel is IP66.
- 48 x 48 x 68 mm
- Sampling 10, 50 or 125 ms
- Up to 8 PID blocks
- Front panel IP66
BCS2, BCR2 and BCD2 controllers of the BCx2 series
The BCx2 series replaced the discontinued JCD-33A, JCR-33A and JCS-33A. Sizes are 48 x 48 mm for the BCS2, 48 x 96 mm for the BCR2 and 96 x 96 mm for the BCD2, with a 60 mm panel depth against 98.5 mm for the JCD-33A. A 9-step program, 125 ms sampling and an IP66 front are standard.
- Replaces JCx-33A series
- Panel depth 60 mm
- 9-step program
- Front panel IP66
BCS3 basic temperature controller
The BCS3 is a basic temperature controller with 12 x 6 mm display characters. Depending on the model, the input takes K and J thermocouples and Pt100, or R, S and T thermocouples. Output is relay contact or SSR drive voltage, sampling is 500 ms, and two event outputs and an IP65 front are options.
- Characters 12 x 6 mm
- K, J, R, S, T thermocouples
- Sampling 500 ms
- IP65 front as option
DCL-33A DIN rail controller
The DCL-33A measures 22.5 x 75 x 100 mm and mounts on a DIN rail inside the control panel. Its input takes 18 types: thermocouples, RTDs, DC current and voltage, with 125 ms sampling. Optional RS-485 uses the Shinko protocol or MODBUS ASCII/RTU; supply is 100 to 240 V AC or 24 V AC/DC.
- 22.5 x 75 x 100 mm
- 18 input types
- Sampling 125 ms
- MODBUS ASCII/RTU
JCL-33A compact 48 x 24 mm controller
The JCL-33A measures 48 x 24 x 98.5 mm and suits injection molders, extruders, bag makers, packagers, dryers and electric furnaces. Sampling is 0.25 s; two event outputs and a 1 pattern, 9 step program are standard. The front panel is IP66, and it replaces the discontinued FCL-13A.
- 48 x 24 x 98.5 mm
- Sampling 0.25 s
- 2 event outputs
- Front panel IP66
QX1 modular controllers and QTC1 modules
The QX1 modular series handles measurement and control of up to 1024 points. The QTC1-2 (2 channels) and QTC1-4 (4 channels) modules work alone or linked, as does the QTC1-R. Five control methods, peak power suppression and a program-less QTC1 link to Mitsubishi PLCs are built in.
- Up to 1024 points
- QTC1-2: 2 channels
- QTC1-4: 4 channels
- Five control methods
SA-500 solid state relays
The SA-515-Z, SA-525-Z and SA-540-Z carry 15, 25 and 40 A loads at 75 to 250 V AC with zero voltage switching. Control voltage is 4 to 32 V DC, input-output dielectric strength is 4000 V, and a built-in varistor absorbs external surges. AQP813 and AQP815 heat sinks are sold separately.
- Load current 15, 25, 40 A
- Load 75 to 250 V AC
- Control 4 to 32 V DC
- Dielectric 4000 V
PA-200 power controllers
The PA-200-H uses phase control and suits inductive loads such as motors and solenoids. The PA-200-Z uses zero-cross frequency division, and the H3 is the 3-phase version. Rated current is 15, 30, 60, 100 or 150 A; input is 4 to 20 mA DC, relay contact, manual setting or 0.8 to 4 V DC.
- Rated 15 to 150 A
- H: phase control
- H3: 3-phase control
- Input 4 to 20 mA DC
Choosing a Shinko Technos temperature controller
Shinko Technos of Minoo, Osaka, Japan, was founded in 1945 and makes temperature controllers, multi-point control systems, power controllers, recorders and signal conditioners.
In the 48 x 48 mm size there are the ACS2 with 10 to 125 ms sampling and 8 PID blocks and the BCS2 of the BCx2 series; for 48 x 96 and 96 x 96 mm, the BCR2 and BCD2; the basic model is the BCS3.
The DCL-33A mounts on a DIN rail, and the compact 48 x 24 mm JCL-33A serves injection molders, extruders and packagers. Until 1991 the company was named Shinko Electric Instrument.
Multi-zone control with QX1 modules
The QX1 series builds a system of up to 1024 points from the QTC1-2, QTC1-4 and QTC1-R control modules, the QAM1-4 analog module and the QDM1 digital module. Auto-balance multi-zone connection keeps zones uniform, and peak power suppression lowers power equipment costs.
The modules store the 10 most recent errors. For replacing Shinko C series devices the maker points to the QMC1-C communication module.
Relays, power controllers and recorders
SA-500 solid state relays for 15, 25 and 40 A switch 75 to 250 V AC loads at zero voltage. PA-200 power controllers for 15 to 150 A use phase control or zero-cross frequency division; the 3-phase H3 version uses phase control only.
The HR-700 hybrid recorder writes on a 100 mm chart 16 m long, in 1-pen, 2-pen and 6-point versions, with a 150 mm depth and an IP65 front panel. The HR-706 ink ribbon now carries the model name EPSR024C000001A.
Shinko Technos and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Shinko Technos and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for TOHO Electronics
- Equipment and parts for Dixell
- Equipment and parts for KOFLOC
- Equipment and parts for HIRANUMA
Documents and sources
- Shinko Technos — company profile
- Temperature controllers — catalog section
- ACS2 controller — specifications
- BCx2 series — specifications
- BCS3 controller — specifications
- DCL-33A controller — specifications
- JCL-33A controller — specifications
- QX1 modular controllers — overview
- SA-500 solid state relays — specifications
- PA-200 power controllers — specifications
- HR-700 recorder — specifications
- Discontinued products — replacement models
